• Textile Coloration and Finishing
• /
• v.17 no.4 s.83
• /
• pp.21-26
• /
• 2005

A combination separation system is composed of three parts, simple microfiltration unit for the pretreatment of real waste IPA, pervaporation unit with plate and frame type module(the effective membrane area 9,040$cm^2$), and simple ultrafiltration unit as a refiner. Utrafiltration module with hollow fiber membrane(MWCO 10,000) used to purify waste aqueous IPA solution. In addition, the flux of $CMPA-K^+$ composite membrane for waste aqueous IPA solution was very steady-state with long experiment time(30 days). And the standard deviation($\sigma$) was 0.152 and then the coefficient of variation($CV\%$)was 10.82 The IPA concentration on the membrane performance using pervaporation module system could be increased from $89.85wt(\%)$ to more than $99.90wt\%$ in about 8hr at operation temperature of $70^{\circ}C$ using the pervaporation module system. Therefore, a combination separation process system of simple filtration and pervaporation was very effective for the purpose of the IPA purification and reuse front industrial electronic components cleaning process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.255-256
• /
• 2006

The electrical properties of viologen ($VC_8SH$) were studied in terms of the tunneling current characteristics using self-assembling techniques and ultra high vacuum scanning tunneling microscopy (UHV-STM). We fabricated the Au substrate were deposited by thermal evaporation system($420^{\circ}C$). Self-assembled monolayers (SAMs) were prepared on Au(111), which had been thermally deposited onto freshly cleaved, heated mica. The Au substrate was exposed to a 1 mM/L solution of Octanethiol in ethanol for 24 h to form a monolayer. After through rinsing the sample, it was exposed to a 0.1 mM/L solution of $VC_8SH$ in ethanol for 30 min. We measurement of the morphology on the single viologen molecule. The current-voltage (I-V) properties were measured at arbitary configured points on the surface of the sample by using a STS.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1893-1895
• /
• 2001

In this paper, novel release technique using wet etch is proposed. The results of this technique and the results of SAMs (Self-Assembled monolayers) coated after release using this technique are compared. Fabricated structure have 100 um in width and experimental length is from 100 um to 1 mm. Thickness of aluminum sacrificial layer is 2 um and structure thickness is 2.5 um. Cantilevers and bridges are fabricated with electroplated gold and silicon nitride deposited on substrate. An aluminium sacrificial layer was evaporated thermally and removed in various wet etching solutions. Detachment length of cantilever is 200 um and detachment length of bridge is 1 mm after isooctane rinsing. And the SAMs coating condition which is appropriate for gold and nitride are studied respectively.

• Journal of Korean Biological Nursing Science
• /
• v.18 no.4
• /
• pp.288-295
• /
• 2016

Background: This study was conducted in order to survey the current state of cleaning, disinfection, rinsing, drying, and storage of gastrointestinal endoscopes. Methods: Eighty hospitals were selected through convenient sampling. Self-reported questionnaire was distributed from September 14 to October 10 in 2015. Results: The response rate was 67.5% (54/80). In 88.9% of the hospitals, reprocessing was performed in a cleaning space separated from the laboratory and 88.9% used an enzymatic cleaner. Disinfectants used were ortho-phthalaldehyde in 63.0%, and paracetic acid in 33.3%. Eighty seven percent of the hospitals used test strips in order to test the effective concentration of disinfectant and in 61.1%, drying was done through passing air and over 70% alcohol. Microbial culture for the quality control of gastrointestinal endoscopes was performed in 77.8%. In the comparison of the adequacy of gastrointestinal endoscope reprocessing, it was observed that gastrointestinal endoscopes were reprocessed more adequately in larger and tertiary care hospitals. Conclusion: Gastrointestinal endoscopes were reprocessed in similar manners, but there were differences in the detailed process. It is still necessary to segment reprocessing into stages, to prepare standardized guidelines, and to monitor compliance with the guidelines.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.312-312
• /
• 2011

All ship's ballast water should be inspected by administration after enter into force IMO BWM Convention. The purpose of the sampling device is to concentrate large amount of samples and to improve return rate of samples. It is composed of Concentration and Rinsing Part and optimized by the variety of tests. it is fully automated and therefore efficiently operated in ships.

• Journal of Species Research
• /
• v.1 no.1
• /
• pp.56-67
• /
• 2012

During a study of harpacticoid copepods from Korea, one species of the family Orthopsyllidae was found by rinsing macroalgae collected from the intertidal and subtidal zones at Hangaechang, Munseum Islet in Jeju Island of Korea. The Orthopsyllus is closely related to Orthopsyllus linearis curvaspinata Mielke, 1993, however it is distinguished from the original description by the combined characters of slightly slender caudal seta V in the female, relatively short and ovoid caudal ramus, the seta formula of P3, and the length of P2 and P4 endopod in the male. Since Orthopsyllus linearis (Claus, 1866) is notorious for its incomplete previous descriptions and therefore its polymorphic status, it is premature to fix the status of present Orthopsyllus species from Korea, without the detailed comparative study among the congeners. However due to the urgent need for the report of the genus in the region, we report this species as Orthopsyllus linearis (Claus, 1866) like but different one within the genus: Orthopsyllus cf. linearis (Claus,1866). This is the first report of the genus Orthopsyllus for the first time in Korea.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.3
• /
• pp.505-513
• /
• 2017

Objectives: The purpose of this study was to identify the needs of independent dental hygiene practices in the Korean public dental hygienists. Methods: This research was a cross-sectional survey study. 159 Korean public dental hygienists were selected by simple random sampling on March 10, 2017. 133 public dental hygienists were participated, after excluding 26 hygienists who showed insufficient responses. The respondents were asked to select one of the following options to reflect their needs: direct supervision, indirect supervision, and independent dental hygiene practice. Results: The results showed that the public dental hygienists wanted both public oral health practices (62.5%) and assistance in preventive dental treatments (63.4%) to be performed independently. Conclusions: The public dental hygienists were required to independently perform oral health education and fluoride mouth rinsing projects. Dental hygienists should improve their capability of independently practicing dental hygiene first, and then indicators. It should be established and measured to evaluate their competency in this respect. Legal protection should be considered for independent dental hygiene practices.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.18-23
• /
• 1999

The formation conditions of Na-cellulose II with three fold helix were investigated by an x-ray diffraction method. Na-cellulose II was formed through Na-cellulose I. It seems that the concentration of sodium hydroxide in Na-cellulose II is higher than both those of Na-cellulose I and Na-cellulose III. Na-cellulose II was formed well by different rinsing and drying methods even though the sample treatment was carried out in very short periods of time. Metal-complexed Na-cellulose swollen in the mixture of $Cu(OH)_2$ and sodium hydroxide is stable in wet state, and changed to a different polymorph by drying.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.5
• /
• pp.665-674
• /
• 2014

An analysis of the components of clay mineral before and after coloration (XRF) showed that the elements involved in coloration are Fe, Cr, and Ni. Fe accounts for 65% of coloring components on dyed fabric; in addition, Cr and Ni also affect coloring. The optimal coloration condition was to repeat the process of immersing the cotton fabric in $80^{\circ}C$ slurry of 8g of clay mineral to 1g cotton for 60 minutes, dry it for 24 hours and rinse three times. Especially, as the repetition of coloration increased, the $(K/S)_{440}$ value of sample A increased from 1.0 to 2.5, and sample B increased from 1.0 to 1.6. The effect of the repeated process on coloration was significant; consequently, the rinsing and drying process were important to decrease the coloration level. It also showed excellent results in regard to color fastness to washing, light, rubbing, perspiration, and antibiotic effect.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.1
• /
• pp.40-45
• /
• 2007

Methylene blue(MB) was photocatalytically degraded with one-body photoanode and solar simulator to investigate the possible application to both environmental purification and photoelectrochemical cell for hydrogen production. Photoactive titanium dioxide was formed on both sides of Ti plate following steps such as rinsing-annealing-calcination or anodizing(20 V, 30 V)-annealing($350^{\circ}C$, $450^{\circ}C)$ after etching. The prepared titania plate($2cm{\times}2\;cm$, ca 1.6 mg $TiO_2$ on the basis of $1\;{\mu}m$ thickness) was used to degrade MB(10 ppm in 200 mL solution). The reaction tended to follow the Langmuir-Hinshelwood kinetics with zero order. Comparative experiments with Degussa P25 showed the same zero order kinetics when 2 mg of P25 had been used, while the first order kinetics when 200 mg used. This concludes the feasibility of the prepared titania plate as a material for the purification of low-level harmful organics and an electrode or a membrane for photoelectrochemical system for hydrogen production.