• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.260-265
• /
• 2001

본 연구에서는 연속 웨이블렛 변환을 이용하여 Ringing 현상을 연구하였다. 사용되어진 웨이블렛은 Morlet 웨이블렛이었고, 실험은 파수조에서 수행되었다. 또한 Ringing 현상을 다루고자 쇄파를 발생시켰다. 실험에 쓰인 모델은 수면을 통과하여 수직으로 고정된 원주 실린더였고, 이 실린더에 작용된 힘과 파고가 측정되어졌다. 이들은 연속 웨이블렛 변환으로 분석되어졌고, 이러한 분석으로 얻어진 scalogram 들은 고주파 성분이 쇄파 충격시 만들어진다는 사실을 시간영역상에서 보여주었다. 이는 기존의 스펙트럼 분석에서는 찾기 힘든 것이다. Coherence 분석도 위의 결론을 뒷받침해 주었다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.271-280
• /
• 2004

This paper presents a new iterative image restoration algorithm with removal of boundary/object-oriented ringing, The proposed method is based on CGM(Conjugate Gradient Method) iterations with inter-wavelet shrinkage. The proposed method provides a fast restoration as much as CGM, while having adaptive do-noising and do-ringing by using wavelet shrinkage. In order to have effective do-noising and do-ringing simultaneously, the proposed method uses a space-dependent shrinkage rule. The improved performance of the proposed method over more traditional iterative image restoration algorithms such as LR(Lucy-Richardson) and CGM in do-noising and do-ringing is shown through numerical experiments.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.307-315
• /
• 2019

Condition monitoring has been recognized as an effective and low-cost method to enhance the reliability and improve the maintainability of power electronic converters. In power electronic converters, high-frequency oscillation occurs during the switching transients of power transistors, which is known as ringing. The ringing frequency mainly depends on the values of the parasitic capacitance and stray inductance in the oscillation loop. Although circuit stray inductance is an important factor that leads to the ringing, it does not change with transistor aging. A shift in either the inside inductance or junction capacitance is an important failure precursor for power transistors. Therefore, ringing frequency can be used to monitor the health of power transistors. However, the switching actions of power transistors usually result in a dynamic behavior that can generate oscillation signals mixed with background noise, which makes it hard to directly extract the ringing frequency. A frequency extraction method based on empirical mode decomposition (EMD) and Fast Fourier transformation (FFT) is proposed in this paper. The proposed method is simple and has a high precision. Simulation results are given to verify the ringing analysis and experimental results are given to verify the effectiveness of the proposed method.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.118-122
• /
• 2000

In this study, Ringing is investigated by continuous wavelet transform. Ringing is considered to be one of the typical transient phenomena in the field of ocean engineering. The wavelet analysis is adopted to analyze ringing from the point that wavelet analysis is capable of frequency analysis as well as time domain analysis. The use mother wavelet is the Morlet wavelet. The relation between the frequency of the time series and that of wavelet can be clearly defined with Mor1et wavelet. Experimental data obtained by other researchers was used. The wave height time series and acceleration times series of the surface piercing cylinder were analyzed. The results show that the proposed scheme can detect typical frequency region by the time domain analysis which could hardly be detected if one relied on the frequency analysis.

• Journal of Magnetics
• /
• v.13 no.4
• /
• pp.120-123
• /
• 2008

Magnetization ringing following domain wall collision on a ferromagnetic nanowire has been investigated by micromagnetic simulation. Suppressed magnetization ringing is observed with the introduction of a small ribbon to the nanowire. Magnetization ringing has been analyzed in a frequency space by a fast Fourier transform. With the introduction of a small ribbon and/or taping of the wire, the amplitude of ringing is reduced with a shifted frequency peak.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.12
• /
• pp.586-593
• /
• 1986

Ringing during the scan time deteriorates the picture quality of television receiver. By tuning the stray reactance of the flyback transformer(FBT)to harmonics of the retrace pulse, the ringing can be suppressed and this is, what is called, the harmonic tuning methed. But finding the conditions for the ringing to cease in lossy FBT and satisfying these conditions at design stage require much time and experience. In this paper, the conditions for the ringing to cease in loss-included equivalent circuit are derived and a new method, unharmonic-tuning method, is suggested.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.276-277
• /
• 2020

본 논문은 Full-bridge converter 2차측 다이오드의 Ringing 전압을 제거하는 방법으로 Active Snubber를 제안한다. 기존 RCD Snubber는 다이오드의 Ringing 에너지를 저항으로 소모하는 방식으로 전압 서지를 줄이는데 한계가 있다. 이러한 문제를 해결하기 위해 Active Snubber가 제안 되었으며, Active Snubber는 다이오드의 Ringing 전압을 회생시킴으로써, 전압스트레스를 줄이고 효율을 개선하는 이점을 보여준다. 본 논문에서는 7KW Full-bridge converter에 제안하는 Active Snubber를 적용하여 그 유도성을 입증하였다.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.62-68
• /
• 2014

Purpose: After I-131 therapy, SPECT/CT is useful in identifying location of thyroid remnants and metastasis of thyroid cancers. An excessive uptake of thyroid leads to a ringing artifact in the SPECT images. The aim of this study is to investigate and suggest a proper post filters to remove ringing artifact and produce better image quality. Materials and Methods: A low-cost, customized thyroid-mimicking phantom, consisting of an acrylic bottle and a hollow sphere was used for SPECT/CT Discovery (GE Healthcare, USA). It was filled with I-131 solution. The ratio of hollow sphere to background were varied as 50:1, 200:1, 1000:1 and 4000:1. Acquired images were reconstructed by OSEM (2 iterations, 10 subsets) with and without Evolution (resolution recovery correction, GE). Three different post-filters were applied; Butterworth (cut off: 0.38 to 0.58 with intervals of 0.05), Hanning (cut off: 0.8 to 1 with intervals of 0.05) and Gaussian (FWHM: 3 to 5 with intervals of 0.5) filters. Contrast, background variability, air area variability, and full width half maximum (FWHM) were compared. Results: Higher contrasts were obtained from the SPECT images with Evolution than without Evolution. In the case of images without Evolution, image distortion such as star artifact was generated. For all sphere-to-background ratio, the Butterworth filter showed better constrasts and FWHMs than other two filters, but the ringing artifact was still generated in all studies except 50:1 and it was decreased as cutoff value was increased. The ringing artifact didn't appear with Hanning and Gaussian filters at all studies, however constrats and FWHMs with Gaussian was worse than Hanning filter. For the images having ringing artifacts, the background variability and air area variability were increased. Conclusion: In this study, we suggested that it is desirable to use Hanning filter when the ringing artifact is generated and to use Butterworth filter when ringing artifact is not generated in I-131 SPECT.

• Current Optics and Photonics
• /
• v.4 no.3
• /
• pp.200-209
• /
• 2020

We describe an approach that uses a bilateral filter to reduce the ringing artifact in motion-blurred restoration image. It takes into account the specific physical structure of the ringing artifact combined with the properties of the human visual system. To properly reduce the ringing artifact, each of the adjacent pixels is limited in a straight line which has a given direction. To protect the edges and the texture regions of an image, our algorithm divides the image into texture regions and flat regions, and the artifact reduction algorithm is only applied to the flat region. Finally, we use 8 typical images and 5 objective quality evaluation indices to evaluate our algorithm. Experimental results show that our algorithm can obtain better results in subjective visual effect and in objective image quality evaluation.

• ETRI Journal
• /
• v.42 no.5
• /
• pp.790-798
• /
• 2020

Herein, a low-ripple coarse-fine digital low-dropout regulator (D-LDO) without ringing in the transient state is proposed. Conventional D-LDO suffers from a ringing problem when settling the output voltage at a large load transition, which increases the settling time. The proposed D-LDO removes the ringing and reduces the settling time using an auxiliary power stage which adjusts its output current to a load current in the transient state. It also achieves a low output ripple voltage using a comparator with a complete comparison signal. The proposed D-LDO was fabricated using a 65-nm CMOS process with an area of 0.0056 μ㎡. The undershoot and overshoot were 47 mV and 23 mV, respectively, when the load current was changed from 10 mA to 100 mA within an edge time of 20 ns. The settling time decreased from 2.1 ㎲ to 130 ns and the ripple voltage was 3 mV with a quiescent current of 75 ㎂.