• 제목/요약/키워드: Ring fault

검색결과 63건 처리시간 0.024초

우주용 중복구조 링 카운터를 위한 고장 진단 및 자가 복구 시스템 (A Fault Detection and Self-Recovery System for Space-Borne Dual Ring Counters)

  • 곽성우;양정민
    • 전기학회논문지
    • /
    • 제62권1호
    • /
    • pp.120-126
    • /
    • 2013
  • This paper proposes a novel scheme of fault detection and self-recovery for space-borne dual ring counters subject to transient faults. The considered ring counter is equipped with hardware redundancy, but it has a limited output domain where direct access to the current state is unavailable. We employ the theory of corrective control to detect any transient fault occurring to the counter bits and to realize immediate self-recovery of the ring counter back to the normal state. The structure of the fault-tolerant controller is designed to be minimal regardless of the counter size. To validate the applicability, we implement the proposed system on a commercial FGPA board.

고조파 성분을 고려한 유도형 고온초전도한류기의 동작 특성 해석 (The Analysis of Operational Characteristics of Inductive High-Tc Superconducting Fault Current Limiter Concerning Harmonic Component)

  • 임도현;주민석;추용;김한준;고태국
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 A
    • /
    • pp.131-133
    • /
    • 1995
  • Inductive high-Tc superconducting fault current limiter using YBCO superconducting ring in the secondary part has many advantages in power networks. It is based on the superconducting to normal transition and this paper describes its operational characteristics and experimental results, especially focused on the harmonic component analysis and recovery time. We fabricated and tested it under various conditions for the analysis of transient fault characteristics. And for the analysis of harmonics we used FFT methods. The superconducting ring was quenched in 240Arms and fault current was effectively limited to the lower current level. In addition, it was fast recovered when the fault condition was removed and after fault the system had odd harmonics.

  • PDF

진동모드를 이용한 링 구조물의 결함 탐지 (Fault Detections of Ring Structures using Vibration Modes)

  • 김석현;장호식
    • 산업기술연구
    • /
    • 제22권A호
    • /
    • pp.29-36
    • /
    • 2002
  • A damage detection algorithm using vibration modes is applied to the ring structures and the modal behaviors of the slightly asymmetric rings are examined. Mode shape change, MSER(modal strain energy ratio) and MCR(modal curvature ratio) are investigated to identify the locations of faults or damages The above fault detection parameters are calculated and compared by the finite element analysis on rings with designed local damages. Damages are modeled as a reduced stiffness in the analysis The results show that MSER and MCR can be proper parameters to detect local damages in the ring structures.

  • PDF

(n,k)-스타 그래프에서의 새로운 링 임베딩 및 결함허용 임베딩으로의 응용 (New Ring Embedding and its Application into Fault-tolerant Embedding in (n,k)-star Graphs)

  • 장정환;좌경룡
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제27권3호
    • /
    • pp.313-323
    • /
    • 2000
  • 본 논문에서는 상호연결망 그래프 중 하나인 (n,k)-스타 그래프에 대한 링 임베딩 문제를 다룬다. (n,k)-스타 그래프에 대한 링 임베딩 전략의 유연성을 개선한 새로운 임베딩 기법을 제시하고, 아울러 에지에 결함을 갖는 경우의 결함허용 링 임베딩 문제에 응용 가능함을 보여줌으로써 본 기법의 확장성에서의 우수함을 밝히고자 한다. 본 논문에서 다루고 있는 사이클 특성 관련 연구는 병렬처리 분야에서의 멀티캐스팅 등과 같이 내재된 사이클 특성을 활용하는 분야에 응용이 가능하다.

  • PDF

Efficient Fault-Recovery Technique for CGRA-based Multi-Core Architecture

  • Kim, Yoonjin;Sohn, Seungyeon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제15권2호
    • /
    • pp.307-311
    • /
    • 2015
  • In this paper, we propose an efficient fault-recovery technique for CGRA (Coarse-Grained Reconfigurable Architecture) based multi-core architecture. The proposed technique is intra/inter-CGRA co-reconfiguration technique based on a ring-based sharing fabric (RSF) and it enables exploiting the inherent redundancy and reconfigurability of the multi-CGRA for fault-recovery. Experimental results show that the proposed approaches achieve up to 73% fault recoverability when compared with completely connected fabric (CCF).

결함 노드를 갖는 (n,K)-스타 그래프에서의 링 임베딩 (Ring Embedding in (n.K) Star Graphs with Faulty Nodes)

  • 장정환;김진수
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제29권1호
    • /
    • pp.22-34
    • /
    • 2002
  • 본 논문에서는 최근에 제안된 (n,K)-스타 그래프에서 결함 노드를 포함하는 경우의 링 임베딩 문제를 다룬다. 그래프 자체의 계층적 특성을 이용한 일련의 차원 확장 및 결함 노드의 분산 전략 을 효율적으로 이용하여 n-3개의 이하의 결함 노드만을 포함하고, $n-k{\geq}2$를 만족한는(n.k)-스타 그래프에서 고장 노드들만 제외시킨 최대 크기의 링을 임베딩할 수 있음을 보이고해당 임베딩 알고리즘을 제시한다. 본 논문에서 다루고 있는 사이클 특성과 관련된 림 임베딩 연구는 병렬 처리 분야에서의 멀티캐스팅 등 과 같이 내재된 사이클 특성을 활용하는 분야에 응용이 가능하다.

MPM을 이용한 고압전동기 운전중 상태 평가 (On-Line Assessment of High Voltage Motor Condition using the Motor Performance Monitor)

  • 김희동;공태식
    • 전기학회논문지
    • /
    • 제57권9호
    • /
    • pp.1589-1593
    • /
    • 2008
  • The condition of a high voltage motor was monitored with the motor performance monitor (MPM) at the motor control center. The MPM detected defects in the rotor bar and end ring and input power according to motor and load conditions. The assessment of the condition of a coal pulverizer motor indicated it was clearly in good condition in terms of the rotor bars, over voltage, and motor performance. However, the side bands at frequency, 56.48 Hz indicated existence of rotor end-ring fault. The large torque ripple indicated abnormal operating conditions. After visual inspection, it has been observed that an impeller blade of the circulating water pump was broken off causing the irregular torque pattern.

Fault Detection 기능을 갖는 이오나이저 모듈용 게이트 구동 칩 설계 (Design of Gate Driver Chip for Ionizer Modules with Fault Detection Function)

  • 김홍주;하판봉;김영희
    • 전기전자학회논문지
    • /
    • 제24권1호
    • /
    • pp.132-139
    • /
    • 2020
  • 공기청정기에 사용되는 이오나이저 모듈은 권선형 transformer를 사용하여 방전전극인 HV+/HV-에 3.5KV/-4KV의 고전압을 공급하여 carbon fiber brush의 전계 방사에 의해 양이온과 음이온을 발생시킨다. 기존의 MCU를 이용한 이오나이저 모듈 회로는 PCB 사이즈가 크고 가격이 비싼 단점이 있고, 기존의 ring oscillator를 이용한 게이트 구동 칩은 oscillation 주기가 PVT(Process-Voltage-Temperature) 변동에 민감하고 HV+와 GND, HV-와 GND의 단락에 의한 fault detection 기능이 없으므로 화재나 감전의 위험이 있다. 그래서 본 논문에서는 7bit binary UP counter를 이용하여 PVT 변동이 있더라도 oscillation 주기를 조절하여 HV+ 전압이 목표 전압에 도달하게 한다. 그리고 HV+와 GND 사이의 단락을 검출하기 위한 HV+ short fault detection 회로, HV-와 GND 사이의 단락을 검출하기 위한 HV- short fault detection 회로와 HV+가 과전압 이상으로 올라가는 것을 검출하기 위한 OVP(Over-Voltage Protection) 회로를 새롭게 제안하였다.

진동모드를 이용한 링 구조물의 결함 탐지 (Fault detections in ring structures using vibration modes)

  • 김석현;장호식
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.1925-1932
    • /
    • 2000
  • Damage detection methods using vibration modes are investigated on ring structures and. modal behavior of the slightly asymmetric rings is examined. Mode shapes changes, MSER(modal strain energy ratio) and MCR(modal curvature ratio) are applied to identify the locations of faults or damages. Parameters are calculated and compared by finite element analysis on rings with designed local damages. Damages are modeled as reduced stiffness in the analysis. The results show MSER and MCR can be proper factors to detect local damages in ring structures.

  • PDF

다차원 링-델타 망: 고성능 고장감내 스위칭 망 (Multidimensional Ring-Delta Network: A High-Performance Fault-Tolerant Switching Networks)

  • 박재현
    • 한국통신학회논문지
    • /
    • 제35권1B호
    • /
    • pp.1-7
    • /
    • 2010
  • 본 논문에서는 편향 자기 경로 제어 방법을 사용하는 새로운 고성능 고장 감내 스위칭 망을 제시한다. 기반이 되는 델타 망의 위상적 구조를 대수적 기법을 사용하여 해석한 결과로 부터, 편향 자기 경로 제어 알고리즘을 사용하는 다중 경로 스위칭 망인 다차원 링-델타 망을 유도한다. 제시된 스위칭 망에서는 델타 망의 링크들을 포함하는 모든 링크들이 결함 혹은 혼잡이 생긴 링크들을 우회하는 대체 경로들로써 사용된다. 본 연구에서 비균일 주소 분포를 가진 부하를 가했을 경우의 이 망의 성능을 시뮬레이션을 사용하여 분석하였다. 입력 셀의 도착률이 0.9이고, Hot Ratio가 0.8인 경우, $1024\;{\times}\;1024$ 크기의 제안된 스위칭 망의 통과율은 사이클릭 벤얀 망에 비해서 36.5% 우수하고, 2차원 링-벤얀 망에 비해서 13.3% 우수하다. 또한, $64\;{\times}\;64$ 크기의 제안된 스위칭 망의 신뢰도 는 Hui의 망에 비해 2.2배, 2차원 링-벤얀 망에 비해 46.6% 높다.