• 제목/요약/키워드: Relative sensitivity

검색결과 657건 처리시간 0.033초

Estimation Model of the Change in Dairy Leaf Surface Temperature Using Scaling Technique

  • Eom, Ki-Cheol;Eom, Ho-Yong
    • 한국토양비료학회지
    • /
    • 제46권5호
    • /
    • pp.359-364
    • /
    • 2013
  • This study was conducted to develop a model to estimate crop leaf surface temperature. The results were as following; A definition for the daily time based on elapsed time from the midnight (00:00) as "E&E time" with the unit of Kmin. was suggested. The model to estimate the scaled temperature ($T^*e$) of crop leaf surface temperature by scale factor ($T^*$) according to the "E&E time : Kmin."(X) was developed as eq. (1) $T^*e=0.5{\cdot}sin(X+780)+0.5$ (2) $T^*=(Tx-Tn)/(Tm-Tn)$, Tx : Daily leaf temperature, Tm : Daily maximum leaf temperature, Tn : Daily minimum leaf temperature. Relative sensitivity of the measured temperature compared to the estimated temperature of red pepper, soybean and persimmon was 1.078, 1.033 and 0.973, respectively.

CMOS공정에 의한 SSIMT의 제작 및 특성 (Fabrication and characteristics of SSIMT using a CMOS Process)

  • 송윤귀;임재환;정귀상;김남호;류지구
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집
    • /
    • pp.168-171
    • /
    • 2002
  • A SSIMT(Suppressed Sidewall Injection Magnetotransistor) sensor with high linearity is presented in this thesis. The prototype is fabricated by using the Hynix 0.6$\mu\textrm{m}$ P-substrate twin-well double poly three-metal CMOS Process. The fabricated SSIMT shows that variation of the collector current is extremely linear by varing the magnetic induction from -200mT to 200mT at I$\_$B/=500${\mu}$A, V$\_$CE/=2V and V$\_$SUB/=5V. The relative sensitivity is up to 120%/T. At B = 0, magnetic offset is about 79mT, there relative sensitivity is 30.5%/T. The nonlinearity of the fabricated SSIMT is measured about 1.4%.

  • PDF

CMOS 공정에 의한 Suppressed Sidewall Injection Magnetotransistor의 특성 (Characteristics of the Suppressed Sidewall Injection Magnetotransistor using a CMOS Process)

  • 송윤귀;최영식;김남호;류지구
    • 한국전기전자재료학회논문지
    • /
    • 제17권10호
    • /
    • pp.1029-1033
    • /
    • 2004
  • In this paper, we propose a new Suppressed Sidewall Injection Magnetotransistor(SSIMT) architecture, which allows to overcome the restriction of the standard CMOS technology and achieve high linearity. The proposed SSIMT is designed based on the Hynix 0.6 um standard CMOS technology. The fabricated SSIMT has been experimentally verified. The SSIMT shows that the change of collector current is extremely linear as a function of the magnetic induction at $I_{B}$ =500$\mu$A, $V_{CE}$ =2V and VSE =5 V. The relative sensitivity is up to 120 %/T. The magnetic conversion offset is about 79 mT with 30.5 %/T relative sensitivity. The nonlinearity of the fabricated SSIMT is measured about 1.4 %.%.

AN APPLICATION OF PLASMA-POLYMERIZED YbPc$_2$ FILM: HUMIDITY SENSOR

  • Yamana, Masao;Kashiwazaki, Naoya
    • 한국표면공학회지
    • /
    • 제29권6호
    • /
    • pp.703-708
    • /
    • 1996
  • Humidity sensing cheracterisrics of vacuum deposited plasma poly merized $YbPc_2$ films were evaluated. In both films, humidity caused an increase of pro-ton conduction. Polymerised film shows a threshold fo humidity increase and its sensitivity diminishes more than $38^{\circ}C$ of relative humidity. Furthermore, for the polymerized film, two min. of resssponse time and 1 min. of recovery time are also obtained. The sensitivity between 10% and 85% of relative hum-idities is found to be one hundred higher than that of the vacuum deposited film.

  • PDF

CMOS 공정에 의한 2차원 SSIMT의 제작 및 특성 (Fabrication and characteristics of 2-Dimensional SSIMT using a CMOS Process)

  • 송윤귀;이지현;최영식;김남호;류지구
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
    • /
    • pp.443-446
    • /
    • 2003
  • A 2-Dimensional SSIMT(Suppressed Sidewall Injection Magnetotransistor) sensor with high linearity is presented in this paper. The prototype is fabricated by using the Hynix $0.6{\mu}m$ CMOS Process. The fabricated SSIMT shows that the variation of each collectors current are extremely linear by varing the magnetic induction from -200mT to 200mT at $I_B\;:\;1000{\mu}A,\;V_{CE}\;=\;5V\;and\;V_{SUB}\;=\;5V$. The relative sensitivity is up to 13%/T. At B = 0, magnetic offset is about 40mT, there relative sensitivity is 4.72%/T. The nonlinearity of the fabricated 2-D SSIMT is measured about 1.2%.

  • PDF

유도 미사일의 사거리 민감도 연구 (Range Sensitivity Analysis of a Canard Controlled Missile)

  • 양영록;조태환;명노신
    • 한국군사과학기술학회지
    • /
    • 제14권1호
    • /
    • pp.39-48
    • /
    • 2011
  • This study describes a range sensitivity of a canard controlled missile. An investigation was conducted into the relative importance of aerodynamic parameters on a guided missile. Also this study was analyzed by quantifying their effects on the missile range. To analyze the range sensitivity of a guided missile, a trajectory analysis program of a guided missile was developed. The range sensitivity analysis was conducted on a thrust, weight, drag and lift. The result of the range sensitivity analysis shows that the design parameters with the greatest effect on the missile range are thrust, drag, weight, and lift, in descending order of importance. The thrust on range extension is quite obvious to extend a range of a guided missile. In particular, the drag exhibited greater range sensitivity than lift at a guided flight. The result also shows that missile range could be maximized by applying the appropriate launch angle and canard pitch-up control.

Theoretical Analysis and Optimization of Extrinsic Fabry-Perot Interferometer Optical-fiber Humidity-sensor Structures

  • Yin, Xiao Lei;Wang, Ning;Yu, Xiao Dan;Li, Yu Hao;Zhang, Bo;Li, Dai Lin
    • Current Optics and Photonics
    • /
    • 제5권6호
    • /
    • pp.652-659
    • /
    • 2021
  • The theoretical analysis and optimization of extrinsic Fabry-Perot interferometer (EFPI) opticalfiber humidity sensors are deeply investigated. For a typical dual-cavity structure composed of an optical fiber and a humidity-sensitive membrane (HSM), the changes in refractive index (RI) and initial length are discussed for polymer materials and porous oxide materials when relative humidity (RH) increases. The typical interference spectrum is simulated at different RH using MATLAB. The spectral change caused by changing HSM RI and initial length are simulated simutineously, showing different influences on humidity response. To deeply investigate the influence on RH sensitivity, the typical response sensitivity curves for different HSM lengths and air-cavity lengths are simulated. The results show that the HSM is the vital factor. Short HSM length can improve the sensitivity, but for HSM RI and length the influences on sensitivity are opposite, because of the opposite spectral-shift trend. Deep discussion and an optimization method are provided to solve this problem. According to analysis, an opaque HSM is helpful to improve sensitivity. Furthermore, if using an opaque HSM, a short air cavity and long HSM length can improve the sensor's sensitivity These results provide deep understanding and some ideas for designing and optimizing highly sensitive EFPI fiber humidity sensors.

진동 측정용 압전형 가속도센서의 압전특성 효과 (Influence of Effective Piezoelectric Properties on Performance of Piezoelectric Accelerometer for Vibration Measurements)

  • 권정락
    • 한국세라믹학회지
    • /
    • 제32권8호
    • /
    • pp.945-949
    • /
    • 1995
  • In order to investigate the performance of compression-type accelerometer on piezoelectric properties, PZT materials have been studied. The ring-shaped piezoelectric elements were prepared using commercial PZT powders by conventional ceramic process. Their estimated relative dielectric constant, piezoelectric charge constant (d33) and voltage constant (g33) values showed 390∼3400, (90∼593)×10-12 C/N and (19.5∼40.5)×10-3 V-m/N, respectively. The charge sensitivity of accelerometer is proportional to the piezoelectric charge constant value (d33) of PZT, but its voltage sensitivity is related with the piezoelectric voltage constant (g33). Since the mounted resonance frequency and sensitivity are dependent on the seismic mass as well as physical charateristics and size of PZT elements, the suitable considerations between two components are required for accelerometer's design.

  • PDF

프리스트레스트 콘크리트 교량의 크리프와 건조수축효과의 민감도 해석 (Sensitivity Analysis of Creep and Shrinkage Effects of Prestressed Concrete Bridges)

  • 오병환;양인환
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
    • /
    • pp.656-661
    • /
    • 1998
  • This paper presents a method of statistical analysis and sensitivity analysis of creep and shrinkage effects in PSC box girder bridges. The statistical and sensitivity analyses are performed by using the numerical simulation of Latin Hypercube sampling. For each sample, the time-dependent structural analysis is performed to produce response data, which are then statistically analyzed. The probabilistic prediction of the confidence limits on long-term effects of creep and shrinkage is then expressed. Three measures are examined to quantify the sensitivity of the outputs to each of the input variables. These are rank correlation coefficient(RCC), partial rank correlation coefficient(PRCC) and standardized rank regression coefficient(SRRC) computed on the ranks of the observations. Probability band widens with time, which indicates an increase of prediction uncertainty with time. The creep model uncertainty factor and the relative humidity appear as the most dominant factors with regard to the model output uncertainty.

  • PDF