• The Mathematical Education
• /
• v.57 no.1
• /
• pp.55-74
• /
• 2018

The purpose of this study is first to examine the relative influence of each error source and to investigate the optimal measurement conditions to ensure satisfactory multiple reliability coefficients based on the teaching aptitude and personality test for pre-service teachers. Participants were 33 students enrolled in mathematics education in a graduate school of education located in the Seoul metropolitan area from 2013 to 2017. The main results were as follows. First, the estimated variance due to residual was highest, followed by nesting of items within domains, graduate students, interactions of graduate students with domains, and domains. Second, total 96 items, with 12 domains containing 8 items in each domain, with cut score of 598, and original 210 items, with 14 domains containing 15 items in each domain, with cut scores of 615 or 716 were optimal measurement conditions to reach acceptable reliability levels based on the joint consideration of dependability coefficients, cut score dependability coefficients, adjusted dependability coefficients, and standard errors of measurement. Third, larger deviations between the arithmetic mean and the cut score indicated higher reliability coefficients of the test results. Finally, this study suggests ways for practitioners to consider how to apply generalizability theory for criterion-referenced tests and how to develop future research based on limitations.

• Advances in aircraft and spacecraft science
• /
• v.6 no.3
• /
• pp.225-238
• /
• 2019

A spike attached to a blunt nosed body significantly alters its flow field and influences the aerodynamic coefficients at hypersonic speed. The basic body is an axisymmetric, with a hemisphere nose followed by a cylindrical portion. Five different types of spikes, namely, conical aerospike, hemisphere aerospike, flat-face aerospike, hemisphere aerodisk and flat-face aerodisk are attached to the basic body in order to assess the aerodynamic characteristic. The spiked blunt body without the aerospike or aerodisk has been set to be a basic model. The coefficients of drag, lift and pitching moment were measured with and without blunt spike body for the length-to-diameter ratio (L/D) of 0.5, 1.0, 1.5 and 2.0, at Mach 6 and angle of attack up to 8 degrees using a strain gauge balance. The measured forces and moment data are employed to determine the relative performance of the aerodynamic with respect to the basic model. A maximum of 77 percent drag reduction was achieved with hemisphere aerospike of L/D = 2.0. The comparison of aerodynamic coefficients between the basic model and the spiked blunt body reveals that the aerodynamic drag and pitching moment coefficients decrease with increasing the L/D ratio and angle of attack but the lift coefficient has increasing characteristics.

• Communications of the Korean Mathematical Society
• /
• v.12 no.3
• /
• pp.603-617
• /
• 1997

Consider a Sobolev inner product on the space of polynomials such as $$ \phi(p,q) = \lambda p(c)q(c) + <\tau,p'(x)q'(x)> $$ where $\tau$ is a moment functional and c and $\lambda$ are real constants. We investigate properties of orthogonal polynomials relative to $\phi(\cdot,\cdot)$ and give necessary and sufficient conditions under which such Sobolev orthogonal polynomials satisfy a spectral type differential equation with polynomial coefficients.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.295-301
• /
• 2000

It is known that among many factors, relative micromotion at bone/implant interfaces can hinder bone ingrowth into surface pores of an implant. Loading conditions, mechanical properties of spinal materials, friction coefficients at the interfaces and geometry of spinal segments would affect the relative micromotion and spinal stability. A finite clement model of the human lumbar spine segments (L4-L5) was constructed to investigate the mechanical sensitivity at the interfaces between bone and cage. Relative micromotion. Posterior axial displacement. bone stress, cage stress and friction force were predicted in changes of friction coefficients, loading conditions. bone density and age-related material/geometric properties of the spinal segments. Relative micromotion (slip distance in a static loading means relative micromotion in routine activity) at the interfaces increased significantly as the mechanical properties of cancellous bone, annulus fibers or/and ligaments decrease or/and as the friction coefficient at the interfaces decreases. The contact normal force at the interfaces decreased as cancellous bone density decreases or/and as the friction coefficient increases A significant increase of slip distance at anterior annulus occurred with an addition of torsion to compressive preload. Relative micromotion decreased with an increase of disc area. In conclusion. relative micromotion, stress response. Posterior axial displacement and contact normal force are sensitive to the friction coefficient of the interfaces, bone density, loading conditions and age-related geometric/material changes.

• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.349-354
• /
• 1984

The relative viscosities and the osmotic coefficients of alkaline metal iodides (NaI, KI, RbI, CsI) in methanol, ethanol, dimethylsulfoxide (DMSO), and sulfolane (TMS) have been measured by Ubbelohde viscometer and vapor pressure osmometry at 45 ∼ $120^{\circ}C.$ The order of A and B coefficients in viscosity for alkaline metal iodides are MeOH > EtOH > TMS > DMSO, and TMS > EtOH > DMSO > MeOH. dB/dT values for the alkaline metal iodides are in the order of NaI > KI > RbI > CsI in the protic solvents, while those for the aprotic solvents are in the reverse order. The order of the osmotic coefficients for the alkaline metal iodides is EtOH > DMSO > MeOH > TMS.

• Journal of Preventive Medicine and Public Health
• /
• v.20 no.2 s.22
• /
• pp.255-260
• /
• 1987

The digital dust indicator (Sibata P-5), one of the direct·reading instruments was evaluated for the respirable dust in the underground coal mine environments. As a reference, respirable dust was determined using three cyclones and/or impactors. All the tests were performed on aerosol in twenty underground coal mines. The coefficients of mass-relative concentration were $0.067{\pm}0.054$ (Mean$\pm$Standard deviation) (range: 0.006-0.172). The relationship between relative concentration and temperature was not significant statistically. Also, the relationship of relative concentration and relative humidity was not significant. Mass concentration and relative concentration were $5.31{\pm}5.22mg/m^3$ and $162{\pm}163$ CPM ($Mean{\pm}Standard$ deviation) respectively. The range of mass concentration was $1.22-22.69mg/m^3$; relative concentration 16-628 CPM. The relationship of mass concentration and relative concentration was not significant in these ranges.

• Plant Resources
• /
• v.6 no.3
• /
• pp.178-182
• /
• 2003

This study was conducted to investigate the relationship between yearly variations of climatic elements and yearly variations of productivity in perilla. In addition, correlation coefficients among yield and yield components were estimated. The data of yield and yield components were investigated for 10 years from 1991 to 2000. The meteorological data gathered at the Yeosu Weather Station for the same period were used to find out the relationships between climatic elements and productivity. Yearly variation of the amount of precipitation in September was large with coefficients of variation(c. v.) of 11.1%, but the coefficient of variance(c. v.) in July and August were relative small with 1.8, 2.1%, respectively. Number of cluster per hill and weight of 1,000 grains were greatly with c. v. of 76.1, 79.3%, respectively, but the coefficients of variance(c. v.) of plant height and seed yield were more less with 9.58, 10.60%, respectively. Correlation coefficients between precipitation of September and seed yield were positively significant correlation at the level of 5.1%, respectively, but the duration of sunshine in September and seed yield were negatively significant at the level of 5.1%, respectively. Correlation coefficients of these, the plant height, number of branches per plant, cluster length, number of cluster per hill, weight of 1,000 grains and seed yield were positively significant at the level of 5.1% respectively.

• Current Optics and Photonics
• /
• v.2 no.2
• /
• pp.119-124
• /
• 2018

The errors in retrieved aerosol backscattering coefficients due to different lidar ratios are analyzed quantitatively in this paper. The actual calculation shows that the inversion error of the aerosol backscattering coefficients using the Fernald backward-integration method increases with increasing inversion distance. The greater the error in the lidar ratio, the faster the error in the aerosol backscattering coefficient increases. For the same error in lidar ratio, the smaller actual aerosol backscattering coefficient will get the larger relative error of the retrieved aerosol backscattering coefficient. The errors in the lidar ratios for dust or the cirrus layer have great impact on the retrievals of backscattering coefficients. The interval between the retrieved height and the reference range is one of the important factors for the derived error in the aerosol backscattering coefficient, which is revealed quantitatively for the first time in this paper. The conclusions of this article can provide a basis for error estimation in retrieved backscattering coefficients of background aerosols, dust and cirrus layer. The errors in the lidar ratio of an aerosol layer influence the retrievals of backscattering coefficients for the aerosol layer below it.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.2
• /
• pp.200-210
• /
• 2014

An active virtual impedance algorithm is newly proposed to track a sound source and to avoid obstacles while a mobile robot is following the sound source. The tracking velocity of a mobile robot to the sound source is determined by virtual repulsive and attraction forces to avoid obstacles and to follow the sound source, respectively. Active virtual impedance is defined as a function of distances and relative velocities to the sound source and obstacles from the mobile robot, which is used to generate the tracking velocity of the mobile robot. Conventional virtual impedance methods have fixed coefficients for the relative distances and velocities. However, in this research the coefficients are dynamically adjusted to elaborate the obstacle avoidance performance in multiple obstacle environments. The relative distances and velocities are obtained using a microphone array consisting of three microphones in a row. The geometrical relationships of the microphones are utilized to estimate the relative position and orientation of the sound source against the mobile robot which carries the microphone array. Effectiveness of the proposed algorithm has been demonstrated by real experiments.

• Nutrition Research and Practice
• /
• v.4 no.2
• /
• pp.142-148
• /
• 2010

The food frequency questionnaire (FFQ) has been used as an important dietary assessment tool in epidemiologic studies, but the usefulness of the FFQ has been debated in recent years. This study was performed to evaluate the relative validities of 3-day food records and the semi-quantitative FFQ. A total of 124 subjects finished 3-day food records (FRs) during each of the four seasons, as well as the FFQ from December 2002 to May 2004. The FFQ was a food based semi-quantitative FFQ including 103 items. Three-day FRs from each season and a randomly selected season were compared with the remaining 9-day FRs. The remaining 9-day FRs, as a reference measurement, were also compared with the FFQ. Pearson's correlation coefficients between the 3-day FRs and the 9-day FRs were between 0.14 and 0.56. Pearson's correlation coefficients between the FFQ and the 9-day FRs ranged between 0.07 and 0.41. Average proportions of classification into the same quartiles, adjacent quartiles, and distant quartiles between the 3-day FRs and the 9-day FRs were 35.8%, 40.5%, and 5.2%, respectively. On average, the proportions of classification into the same quartiles, adjacent quartiles, and distant quartiles between the FFQ and the 9-day FRs were 31.1%, 39.4%, and 6.9%, respectively. Three-day FRs showed higher correlations and higher agreement proportions of quartile classification with the 9-day FRs than did the FFQ, but both relative validities of 3-day FRs and the FFQ appear to be acceptable as dietary assessment tools. Further studies for validating food intake by reliable biomarkers are necessary.