• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.703-713
• /
• 2020

In many geological fields, including hydrogeology, it is of great importance to determine the heterogeneity of the subsurface media. This study briefly introduces the concept and theory of the method that can estimate the hydraulic properties of the media constituting the aquifer, which was recently introduced by Park (2020). After the introduction, the method was applied to the synthetic aquifer to demonstrate the practicality, from which various implications were drawn. The introduced technique uses a global optimization technique called the covariance matrix adaptation evolution strategy (CMA-ES). Conceptually, it is a methodology to characterize the aquifer heterogeneity by assimilating the groundwater level time-series data due to the imposed hydraulic stress. As a result of applying the developed technique to estimate the hydraulic conductivity of a hypothetical aquifer, it was confirmed that a total of 40000 unknown values were estimated in an affordable computational time. In addition, the results of the estimates showed a close numerical and structural similarity to the reference hydraulic conductivity field, confirming that the quality of the estimation by the proposed method is high. In this study, the developed method was applied to a limited case, but it is expected that it can be applied to a wider variety of cases through additional development of the method. The development technique has the potential to be applied not only to the field of hydrogeology, but also to various fields of geology and geophysics. Further development of the method is currently underway.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.85-92
• /
• 2015

This article presents the dynamic instability response of sigmoid functionally graded material plates on elastic foundation using the higher-order shear deformation theory. The higher-order shear deformation theory has ability to capture the quadratic variation of shear strain and consequently shear stress through the plate thickness. The governing equations are then written in the form of Mathieu-Hill equations and then Bolotin's method is employed to determine the instability regions. The boundaries of the instability regions are represented in the dynamic load and excitation frequency plane. The results of dynamic instability analysis of sigmoid functionally graded material plate are presented using the Navier's procedure to illustrate the effect of elastic foundation parameter on dynamic response. The relations between Winkler and Pasternak elastic foundation parameter are discussed by numerical results. Also, the effects of static load factor, power-law index and side-to-thickness ratio on dynamic instability analysis are investigated and discussed. In order to validate the present solutions, the reference solutions are used and discussed. The theoretical development as well as numerical solutions presented herein should serve as reference for the dynamic instability study of S-FGM plates.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.365-376
• /
• 2020

Immature embryogenesis is a useful process in wheat tissue culture, including transgenic technology, because of its high regeneration efficiency compared to that in other tissues. However, it is a very labor-intensive and time-restrictive method, because the preparation of immature embryos is limited to the optimal time after flowering. In this experiment, 'Speed Breeding', a breeding technique that accelerates breeding generation advancement by extending the photoperiod, was applied to the wheat variety 'Bobwhite'. A controlled growth room was constructed by adjusting the photoperiod (22-hour light/2-hour dark) using LED lights at temperature of 22℃. After vernalization of the Bobwhite seeds at 4℃ for 4 weeks, the seedlings were grown in a controlled growth room and a greenhouse to compare the heading date. In both conditions, calli were induced from immature embryos on the 11^th day after flowering. After 4 weeks, the calli were transferred to a regeneration medium. Regeneration efficiencies under greenhouse conditions and Speed Breeding conditions were determined as 45.05% and 43.18%, respectively. Antioxidant enzyme activity and reference gene expression analysis were performed to confirm the presence of stress due to an extremely long-day photoperiod. As a result, the antioxidant enzyme activity was not distinguished from that of the greenhouse condition. The reference gene expression analysis revealed that the PsaA and CDC genes were highly expressed under the Speed Breeding condition. However, expression of PsbA was similar expression in both conditions. These results will provide useful information for the application of immature embryogenesis to the wheat transformation system.

• Geotechnical Engineering
• /
• v.1 no.2
• /
• pp.17-26
• /
• 1985

This study was carried out for the purpose of comparing in reference to sand drain in the next three different cases. First, The case of drain material (sand pile) has some rigidity during embankment and consolidation. Second, In usual case of no rigidity as a paper drain without permeability during embankment and consolidation Third, Check up clay behavior when above the two cases carried out respectively. This FEM analysis is consisted with Biot's consolidation equation when it is used for Christian Boehmer's numerical technique. The main results are obtained from above the Analysis When sand drain has some rigidity, the lateral and vertical deformation of clay foundation is restrained considerable amount and .exhibited bearing capacity of load as a pile According to the foundation in drained condition and untrained condition, the results are much variable in this analysis method. Also, The behaviors of stress path and pore water pressure met our expectation during , consolidation. This analysis should be considered to put into use of sand drain and design in future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1257-1264
• /
• 2014

Efforts are presently underway for developing an optimal design methodology for GEN-IV nuclear reactors based on target failure probabilities. A typical example is the system-based code, in which the results are represented in the form of partial safety factors (PSFs). Thus, a PSF is one of the crucial elements in either component design or integrity assessment based on target failure probabilities during the operation period. In the present study, a procedure for calculating the PSF of a circumferential through-wall cracked pipe based on the elastic-plastic crack initiation criterion is established, in which the importance of each input variable is assessed. Elastic-plastic J-integrals are calculated using the GE/EPRI and reference stress methods, and the PSF values are calculated using both first- and second-order reliability methods. Moreover, the effect of statistical distributions of assessment variables on the PSF is also evaluated.

• Environmental Engineering Research
• /
• v.22 no.4
• /
• pp.407-416
• /
• 2017

$CO_2$ emission is increasingly focused by public. Beijing and Tianjin are conceived to be a new economic point of growth in China. However, both of them are suffering serious environmental stress. In order to seek for the effect of socioeconomic factors on the $CO_2$ emission of this region, a novel methodology -symbolic regression- is adopted to investigate the relationship between $CO_2$ emission and influential factors of Beijing and Tianjin. Based on this method, $CO_2$ emission models of Beijing and Tianjin are built respectively. The models results manifested that Beijing and Tianjin own different $CO_2$ emission indicators. The RMSE of models in Beijing and Tianjin are 255.39 and 603.99, respectively. Further analysis on indicators and forecast trend shows that $CO_2$ emission of Beijing expresses an inverted-U shaped curve, whilst Tianjin owns a monotonically increasing trend. From analytical results, it could be argued that the diversity rooted in different development orientation and the mixture of different natural and industrial environment. This research further expands the investigation on $CO_2$ emission of Beijing and Tianjin region, and can be used for reference in the study of carbon emissions in similar regions. Based on the investigation, several policy suggestions are presented.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.16-24
• /
• 2009

In this study, fatigue crack growth rate of a cracked railway bogie frame under variable amplitude loading is predicted by applying linear elastic fracture mechanics. For this purpose, we find the critical points by reference surveying on cracked railway bogie frames. And we make an effective load history by synthesizing the dynamic load measured from the critical points of railway bogie frame during commercial line operation and the static load calculated from structural analysis. Crack growth analyses are performed at the 3 critical points under the commercial operation loading condition by assuming an initial crack size as 40 mm. and the results are compared with the experimental results from Japanese railway bogie frame crack growth case. From the analysis results, we find that around 500,000 km operating distance is necessary to bring crack growth from the initial crack to unstable crack. And it takes around 3.8 normal operating years. We conclude that it is enough time to detect the crack between normal maintenance period.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.95-100
• /
• 2008

A 4-node assumed strain finite element based on higher order shear deformation theory is developed to investigate the behaviours of symmetric and unsymmetric laminated composite plates. The present element is based on Reddy's higher order shear deformation theory so that it can consider the parabolic distribution of shear deformation through plate thickness direction. In particular, assumed strain method is adopted to alleviate the shear locking phenomena inherited plate elements based on higher order shear deformation theory. The present finite element has seven degrees of freedom per node and denoted as HSA4. Numerical examples are carried out for symmetric and unsymmetric laminated composite plate with various thickness values. Numerical results are compared with reference solutions produced by other higher order shear deformation theories.

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.2
• /
• pp.79-88
• /
• 2014

Purpose: This study investigated the relationship between smartphone addiction propensities and compare muscle activity of the forearms and brain wave depend on the type of smartphone when inputting text messages. Method: We used an EMG to measure the change in muscle activity by attaching pads to the four muscles in both forearms of all 16 participants. We simultaneously conducted EEG measurements by observing the changes in alpha and beta waves recorded from electrode attached to both ears and the forehead of the participants. The participants had to input a given text using three different types of smartphones for ten minutes each. Result: The comparison of the EMG when inputting text involved a one way analysis of variance and the results showed that the iPad3 was highest for muscle activity followed by GALAXY Note2 and iPhone4. For EEG measurement, a one way analysis of variance was also used and the results showed iPhone4 was higest followed by GALAXY Note2 and finally iPad3 for EEG stress score. Conclusion: The results are thought to be used as reference data for smart phone users.

• Journal of Applied Reliability
• /
• v.17 no.1
• /
• pp.50-57
• /
• 2017

Purpose : This paper is a comparative analysis results of the fatigue test for dental implants and accelerated life test by using a static type loading device commonly used in Korea and a dynamic type loading device (universal-joint) recommended by FDA. Methods : Fatigue tests of dental implant is based on ISO 14801 and classified into static load test and dynamic load test. The tests were carried out on three test specimens by four load stress steps under each loading device. For analysis on failure mode such as crack, fracture and permanent deformation of test specimens, we used X-ray three-dimensional computed tomography on test specimens before and after the fatigue tests. The design of the accelerated life test was based on the analysis results of the fatigue life data obtained from the dynamic load test and the statistical analysis software (Minitab ver.15) was used to analyze the appropriate life distribution. Results : As a result of the fatigue tests and the accelerated life tests at same acceleration condition under each test method, the fatigue life under the dynamic type loading device (universal-joint) was shorter than when static type loading device was applied. Conclusion : This paper can be used as a reference when the universal-joint type loading device for implants fatigue test is applied as ISO 14801.