• Journal of Microbiology and Biotechnology
• /
• v.26 no.4
• /
• pp.739-747
• /
• 2016

The rational utilization of crop straw as a raw material for natural gas production is of economic significance. In order to increase the efficiency of biogas production from agricultural straw, seasonal restrictions must be overcome. Therefore, the potential for biogas production via anaerobic straw digestion was assessed by exposing fresh, silage, and dry yellow corn straw to cow dung liquid extract as a nitrogen source. The characteristics of anaerobic corn straw digestion were comprehensively evaluated by measuring the pH, gas production, chemical oxygen demand, methane production, and volatile fatty acid content, as well as applying a modified Gompertz model and high-throughput sequencing technology to the resident microbial community. The efficiency of biogas production from fresh straw (433.8 ml/g) was higher than that of production from straw silage and dry yellow straw (46.55 ml/g and 68.75 ml/g, respectively). The cumulative biogas production from fresh straw, silage straw, and dry yellow straw was 365 l^-1 g^-1 VS, 322 l^-1 g^-1 VS, and 304 l^-1 g^-1 VS, respectively, whereas cumulative methane production was 1,426.33%, 1,351.35%, and 1,286.14%, respectively, and potential biogas production was 470.06 ml^-1 g^-1 VS, 461.73 ml^-1 g^-1 VS, and 451.76 ml^-1 g^-1 VS, respectively. Microbial community analysis showed that the corn straw was mainly metabolized by acetate-utilizing methanogens, with Methanosaeta as the dominant archaeal community. These findings provide important guidance to the biogas industry and farmers with respect to rational and efficient utilization of crop straw resources as material for biogas production.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.8
• /
• pp.1379-1385
• /
• 2017

The content of taxol in the bark of yews is very low, and this is not affordable from the environmental point of view. Thus, it is a necessity to look for alternative sources of taxol production to solve its supply. Currently, a large portion of the taxol in the market comes from chemical semi-synthesis, but the semi-synthetic precursors such as baccatin III and 10-deacetyl-baccatin III are extracted from needles and twigs of yew trees. Taxol-producing fungi as a renewable resource is a very promising way to increase the scale of taxol production. Our group has obtained a taxol-producing endophytic fungus, Aspergillus niger subsp. taxi HD86-9, to examine if A. niger can produce the taxanes. Six compounds from the fermentation broth of strain HD86-9 were isolated and identified by $^1H$ NMR, $^{13}C$ NMR, and ESI-MS. The results showed that the six compounds included four taxane diterpenoids (taxol, cephalomannine, baccatin III, and 10-deacetyl-baccatin III) and two non-taxane compounds (${\beta}-sitosterol$ and flavonoid isovitexin). The study verified that the taxanes can be produced by the A. niger, which is very important to taxol production via chemical semi-synthesis. Additionally, the finding is potentially very significant to solve the taxol semi-synthetic precursors extracted from needles and twigs of yew trees, and the precursor production can be easily increased through the culture condition optimization, genetic breeding, and metabolic engineering of the A. niger.

• Journal of Korean Society of Rural Planning
• /
• v.7 no.1 s.13
• /
• pp.61-76
• /
• 2001

During the performance of large scale tidal land reclamation project along the coast line, the construction of large scale structures such as sea-dikes, closing estuaries will induce big changes of near-shore hydraulic behavior. In this paper, its is aimed to verify the change of tide and currents after the construction of sea-dike of the Saemangeum project along the coast line. Numerical scale model "TRISULA" which development by Delft Hydraulics in the Netherlands was used. "TRISULA" is adopting the finite difference numerical scheme, and mostly using for hydro-dynamic solution along the sea and estuaries. Model boundary is covering $100{\times}170$ Km and constructed with $133{\times}337$ grids. Outer side boundary is divided 48 sections, and input 37 tidal components are gained from another big scale numerical "Yellow Sea" model. Model calibrations & verifications were performed th field tide & current datas which were measured along sea-dike alignment during Aug. $1997{\sim}Apr$. 1999. And then, numerical simulation with the tide condition dated 17 Apr. 1999 was performed with & without sea-dike construction condition for the comparison. Evaluated boundary is 20 km out-side from sea-dike alignment. Four cross lanes were set up, each of lane contains 3 points, for the comparison of sea-dike construction effects. Results showing the tidal amplitude is reducing approximately 20 cm after the construction of sea-dike during spring tide condition, amplitude 6.9m. Currents after construction of sea-dikes along the alignment, the northern part shows 50%(inner), 90%(outer) and the southern part shows 10%(inner) 50%(outer) of the currents before construction.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.86-101
• /
• 2019

Remote sensing technology has been continuously developed both quantitatively and qualitatively, including platform development, exploration area, and exploration functions. Recently, the use cases and related researches in the agricultural field are increasing. Also, since it is possible to detect and quantify the condition of cropland and establish management plans and policy support for cropland and agricultural environment, it is being studied in various fields such as crop growth abnormality determination and crop estimation based on time series information. The purpose of this study was to analyze the vegetation index for agricultural land reclamation area using a UAV equipped with a multi-spectral sensor. In addition, field surveys were conducted to evaluate the accuracy of vegetation indices calculated from multispectral image data obtained using UAV. The most appropriate vegetation index was derived by evaluating the correlation between vegetation index calculated by field survey and vegetation index calculated from UAV multispectral image, and was used to analyze vegetation index of the entire area.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.221-228
• /
• 2003

In land reclamation construction using marine clay, a measure of material function, that is, the relation between void ratio-effective stress and permeability, is very important aspect for the prediction of self-weight consolidation behavior. But reclaimed ground has very high water content, so there are many difficulties in the laboratory test for measuring material function. For this reason, some researches are carried out using slurry cconsolidometr to measure material function. In this study, material function was measured using slurry consolidometer, and to overcome the shortcoming of researches using slurry cosolidometer, an equation for the prediction of material function was proposed on the basis of column test's parameter. Material function was determined through low stress consolidation test and permeability test, and it also was calculated with the equation using column test parameter. The continuity of material function could be confirmed through these tests. Material function is easily determined with the equation proposed in this study, and can be used for the prediction of self-weight consolidation behavior.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.483-490
• /
• 2004

Nakdong River Plain and its adjoining sea arc unusually covered by very thick soft clay sediments which were caned Pusan clays, sometimes reaching 40-70m. Since early 1990s a large number of geotechnical investigations have been carried out for land reclamation works in the area, including Busan city and its neighboring cities. Nevertheless, geotechnical engineers have paid little attention to studying geological characteristics on the clays, except some researches related to mineralogy, geo-chemistry, benthic foraminiferal fauna etc. The purpose of reserach is the knowledge of the correlation between engineering properties and mineralogy of clay sediments. The correlation analysis carry out multiple regression that have independent variables (Engineering properties) and dependent variables (mineralogy, geochemistry). Engineering properties of clay are correlated with the mineral compositions and geochemical characteristics. The result of the analysis is Wn = -0,6Feldspar + 1.1pH + 0.01TDS + 27.5, Ip = 0.36Clay + 1.44Vermiculite + 0.94clay mineral - 22.118, PI. = 0.005TDS - 0.31Feldspar + 22.43, eo = 0.02Vermiculite - 0.01Quartz + TDS + 0.93, ${\nu}$t = 0.009Quartz - 0.06Conductivity + 1.67, E50 = 1.94Vermicuhte - 0.96Kaohnite -0.53silt + 49.64, SR = -0.25Kaolinite + 1.5pH -2.3Conductivity, Cc = 0.03pH + TDS -0.2, LL = 0.5Clay + 1.3Vermiculite + 5.5Conductivity + 0.8Caly mineral -20.48

• Journal of Ocean Engineering and Technology
• /
• v.20 no.6 s.73
• /
• pp.108-113
• /
• 2006

For the past scores of years, our country has driven its land development toward economic growth as its top priority. ut, as a result that almost all developments been promoted excepting environmental values, in fact, they've incurred some bad environmental effects desirable. Especially, as representative examples, we can raise some issues such as damages of the foreshore or coast wet lands by seas reclamation, and coast corrosion by building up of rivers or coast constructions. Recently, many people started to have great interests in businesses of environment preservation or recycling to minimize effects of these environmental matters. However, before beginning public businesses of non-commercial goods relevant to the seas environments, there seemed to be some limitations that can not accomplish under consideration of environmental sides at the same time while performing economic validities and efficiencies with environmental economic analysis, which is already effective in countries advanced in environment, it's a very meaningful course in that citizens' opinions are being influenced in seas environmental policies for their efficient execution. In this research, after modeling coast corrosion preventives with Jeong-am coast of Gangwon Province, and using Contingent Valuation Method being widely used of value measuring methods on Non-commercial goods, we've appreciated environmental economy's validity of construction works and the scale of environmental economic value of beach restoration work.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.4
• /
• pp.357-361
• /
• 2018

Forward osmosis (FO) process has been attracting attention for its potential applications such as industrial wastewater treatment, wastewater reclamation and seawater desalination. Particularly, in terms of fouling reversibility and operating energy consumption, the FO process is assumed to be preferable to the reverse osmosis (RO) process. Despite these advantages, there is a difficulty in the empirical step due to the lack of separation and recovery techniques of the draw solution. Therefore, rather than using FO alone, recent developments of the FO process have adapted a hybrid system without draw solution separation/recovery systems, such as the FO-RO osmotic dilution system. In this study, we investigated the performance of the hollow fiber FO module according to various operating conditions. The change of permeate flow rate according to the flow rates of the draw and feed solutions in the process operation is a factor that increases the permeate flow rate, one of the performance factors in the positive osmosis process. Our results reveal that flow rates of draw and feed solutions affect the membrane performance, such as the water flux and the reverse solute flux. Moreover, use of hydraulic pressure on the feed side was shown to yield slightly higher flux than the case without applied pressure. Thus, optimizing the operating conditions is important in the hollow fiber FO system.

• Food Science of Animal Resources
• /
• v.29 no.1
• /
• pp.82-90
• /
• 2009

This study was carried out to evaluate the effects of microwave power level on cooking properties of ground pork patties (fat level: 20%). Each patty was cooked from a thawed state to $76.7^{\circ}C$ (center temperature) in a microwave oven with power levels of 40% (360 W), 60% (540 W), 80% (720 W), and 100% (full power, 900 W), respectively. Cooking rate increased with power level, and the non-uniformity also increased with time during cooking. Overheating at the edge of the patties was observed for all power levels, and maximum temperature differences in between the edge position and center position were found in patties cooked at the 900 W power level. Compositional properties, total cooking loss, and drip loss were not affected by power level, although moisture content was lower at the edge than at the center position. As the power level increased, the reduction in patty diameter of cooked patties increased while the reduction in patty thickness decreased. Pork patties cooked at lower power levels (360 W and 540 W) had higher shear force values than those cooked at higher power levels (720 W and 900 W). Few changes were observed in instrumental color values.

• Food Science of Animal Resources
• /
• v.29 no.1
• /
• pp.55-61
• /
• 2009

The objective of this study was to examine the effects of high and low chilling temperature on the water-holding capacity (WHC) and tenderness of hot-boned breast meat of broiler chickens. Breast meat was obtained from 32 broiler chickens within 15 min post-mortem (PM), and then divided into two groups. One group was chilled at $-1^{\circ}C$ and the other group was stored at $30^{\circ}C$ for 3 hr, and then all the samples were chilled at $2^{\circ}C$ until 24 hr PM. During the storage, their physicochemical characteristics were tested at 15 min, 3 hr and 24 hr PM. These included pH, R-values, cooking losses, sarcomere length, MFI, and shear force of the breast meat, none of which was different (p>0.05) between the two temperature treatments at $-1^{\circ}C$ and $30^{\circ}C$. However, sarcomere length was shortened more at $-1^{\circ}C$ than at $30^{\circ}C$, MFI was larger at $30^{\circ}C$ than at $-1^{\circ}C$, drip loss was greater at $30^{\circ}C$ than at $-1^{\circ}C$, and WHC was lower at $30^{\circ}C$ than at $-1^{\circ}C$(p<0.05). In brief, in terms of yield and tenderness, broiler breast meat stored at $-1^{\circ}C$ was superior to that stored at $30^{\circ}C$.