DOI QR코드

DOI QR Code

Performance evaluation of forward osmosis (FO) hollow fiber module with various operating conditions

중공사막 모듈을 이용한 정삼투 공정에서의 운영조건 변화에 따른 성능평가

  • Kim, Bongchul (Department of Land, Water and Environment Research, Korea Institute of Civil Engineering and Building Technology (KICT))
  • 김봉철 (한국건설기술연구원 국토보전연구본부)
  • Received : 2018.07.12
  • Accepted : 2018.08.01
  • Published : 2018.08.15

Abstract

Forward osmosis (FO) process has been attracting attention for its potential applications such as industrial wastewater treatment, wastewater reclamation and seawater desalination. Particularly, in terms of fouling reversibility and operating energy consumption, the FO process is assumed to be preferable to the reverse osmosis (RO) process. Despite these advantages, there is a difficulty in the empirical step due to the lack of separation and recovery techniques of the draw solution. Therefore, rather than using FO alone, recent developments of the FO process have adapted a hybrid system without draw solution separation/recovery systems, such as the FO-RO osmotic dilution system. In this study, we investigated the performance of the hollow fiber FO module according to various operating conditions. The change of permeate flow rate according to the flow rates of the draw and feed solutions in the process operation is a factor that increases the permeate flow rate, one of the performance factors in the positive osmosis process. Our results reveal that flow rates of draw and feed solutions affect the membrane performance, such as the water flux and the reverse solute flux. Moreover, use of hydraulic pressure on the feed side was shown to yield slightly higher flux than the case without applied pressure. Thus, optimizing the operating conditions is important in the hollow fiber FO system.

Keywords

References

  1. Blandin, G. Verliefde, A.R.D., and Clech P.L. (2015). Pressure enhanced fouling and adapted anti-fouling strategy in pressure assisted osmosis (PAO), J. Memb. Sci., 493, 557-567. https://doi.org/10.1016/j.memsci.2015.07.014
  2. Cath, T.Y., Childress, A.E., and Elimelech, M. (2006). Forward Osmosis: Principles, Applications, and Recent Developments, J. Memb. Sci., 281, 70-87. https://doi.org/10.1016/j.memsci.2006.05.048
  3. Heo, J., Han, J., Kim, Y., and Her, N. (2016). Systematic study on calcium-dissolved organic matter interaction in a forward osmosis membrane-filtration system, J. Korean Soc. Water Wastewater, 30(6), 737-744. https://doi.org/10.11001/jksww.2016.30.6.737
  4. Kim, B.C., Boo, C.H., Lee, S.Y., and Hong, S.K. (2012). Evaluation of Forward Osmosis (FO) Membrane Performances in a Non-Pressurized Membrane System, J. Korean Soc. Water Environ., 28(2), 292-299.
  5. Kim, B.C., Hong, S.K., and Choi, J.S. (2017). Pilot-Scale Simulation of Desalination Process Using Water Integrated Forward Osmosis System, J. Korean Soc. Water Environ., 33(4), 403-408. https://doi.org/10.15681/KSWE.2017.33.4.403
  6. Kim, J., Han, J., Sohn, J., and Kim, S. (2016). The Outlook for Forward Osmosis-Reverse Osmosis (FO-RO) Hybrid Desalination Market, J. Korean Soc. Water Wastewater, 30(5), 521-532. https://doi.org/10.11001/jksww.2016.30.5.521
  7. Kim, Y.C. and Park, S.J. (2011). Experimental Study of a 4040 Spiral-Wound Forward-Osmosis Membrane Module, Environ. Sci. Technol., 45, 7737-7745. https://doi.org/10.1021/es202175m
  8. Lee, J., and Kim, S. (2016). Evaluation of water permeability of forward osmosis membranes using osmotically driven membrane test, J. Korean Soc. Water Wastewater, 30(4), 417-425. https://doi.org/10.11001/jksww.2016.30.4.417
  9. Lee, S., Boo, C., Elimelech, M., and Hong, S. (2010). Comparison of Fouling Behavior in Forward Osmosis (FO) and Reverse Osmosis (RO), J. Memb. Sci., 365, 34-39. https://doi.org/10.1016/j.memsci.2010.08.036
  10. McCutcheon, J.R., and Elimelech, M. (2006). Influence of Concentrative and Dilutive Internal Concentration Polarization on Flux Behavior in Forward Osmosis, J. Memb. Sci., 284, 237-247. https://doi.org/10.1016/j.memsci.2006.07.049
  11. Oh, Y.T., Lee, S.H., Elimelech, M., Lee, S.H., and Hong, S.K. (2014), Effect of hydraulic pressure and membrane orientation on water flux and reverse solute flux in pressure assisted osmosis, J. Memb. Sci., 465, 159-166. https://doi.org/10.1016/j.memsci.2014.04.008
  12. Ren, J., and McCutcheon, J.R. (2018). A new commercial biomimetic hollow fiber membrane for forward osmosis, Desalination, 442, 44-50 https://doi.org/10.1016/j.desal.2018.04.015
  13. Wan, C.F., Yang, T., Lipscomb, G.G., Stookey, D.J., and Chung, T.S. (2017). Design and fabrication of hollow fiber membrane modules, J. Memb. Sci., 538, 96-107. https://doi.org/10.1016/j.memsci.2017.05.047
  14. Wang, R., Shi, L., Tang, C.Y., Chou, S., Qiu, C., and Fane, A.G. (2010). Characterization of Novel Forward Osmosis Hollow Fiber Membranes, J. Memb. Sci., 355, 158-167. https://doi.org/10.1016/j.memsci.2010.03.017
  15. Yip, N.Y., Tiraferri, A., Phillip, W.A., Schiffman, J.D., and Elimelech, M. (2010). High Performance Thin-Film Composite Forward Osmosis Membrane, Environ. Sci. Technol., 44, 3812-3818. https://doi.org/10.1021/es1002555

Cited by

  1. Performance Analysis of a Spiral Wound Forward Osmosis Membrane Module vol.40, pp.12, 2018, https://doi.org/10.4491/KSEE.2018.40.12.481