• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.2
• /
• pp.69-73
• /
• 2003

To improve the sensory quality of sliced raw fish, the effect of cold brine temperature on the texture properties was investigated. Fishes were immersed in cold brine by various condition and killed instantly by spiking at the head. The onset of rigor-mortis was accelerated by decrease of immersion temperature. Also, the time reaching full rigor was shortened remarkably too. However, the rigor index of samples immersed in the cold brine decreased more than that of samples killed instantly. Rigor index was the highest in samples killed instantly, followed by $0^{\circ}C,\;-5^{\circ}C,\;-10^{\circ}C,\;-12.5^{\circ}C,\;-15^{\circ}C\;and\;-20^{\circ}C$ in that order. The breaking strength of samples immersed in the cold brine increased slowly but did not increase through all the conditions in the samples. Breaking strength of all samples immersed in the cold brine decreased significantly after reaching the maximum values (p<0.05). The lactate content of muscle was increased by the decreased brine temperature, however ATP content decreased. Minimum lactate and maximum ATP content in fish muscle showed at $-12.5^{\circ}C$. Those results demonstrate that optimal temperature for improvement of sliced raw fish quality by cold brine was $-12.5^{\circ}C.$

• KSBB Journal
• /
• v.9 no.2
• /
• pp.200-210
• /
• 1994

In batch bioreactor fermentations for cyclosporin A (CyA) production, good potential for bioprocess improvement was demonstrated in the immobilized cell system, providing appreciably better utilization of the catalytic activity of the biomass than the freely suspended cells, especially during the exponential phase. When concentrated nutrient medium was added pulsely during the exponential phase of cell growth(at hour 139 of fermentation), reactivation and regermination in both immobilized and suspended cell cultures were observed to contribute to the longevity of CyA production, maintaining maximum CyA titre until 250 hours of fermentation. Contrarily, simple batch fermentations without any supplement of medium in both systems showed repid decrease in CyA concentrations during the late stationary phase. Notably, the CyA yield coefficient $(Y_p/x)$ for the immobilized cell system was maintained quite high even after the pulse addition of the concentrated full medium, reaching almost 80% of the level attained during the exponential phase. This is in sharp contrast when compared with the corresponding value of 58% in the case of parallel-suspended cells. This pattern of CyA production resulted in considerably enhanced CyA production in the immobilized cell system, reaching almost 2 time higher maximum CyA production in comparison with the free cell system.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.2
• /
• pp.74-81
• /
• 2020

Objective: To prevent low back pain, an objective evaluation tool to evaluate pelvic mobility and exercise to improve the flexibility of the lumbar region is needed. The purpose of this study was to compare the results of pelvic mobility measurements using the Wii Balance Board (WBB) and Sensbalance Therapy Cushion (STC), evaluate the usefulness of the STC as a tool for measuring pelvic mobility. Design: Cross-sectional study. Methods: Fifty healthy subjects participated in this study. The subjects performed pelvic mobility range, proprioception, reaction time and reach of the arm using the STC. The pelvic movement parameter was measured two times to determine the intra-rater reliability. To measure the correlation between lumbar muscle tension and pelvic mobility, Myovision was used to measure tension of L4, L5 level erector spinae muscle. Correlations between measured variables were checked to determine the validity of the pelvic mobility assessment tool. Results: STC showed high test-retest reliability in pelvic tilt measurement and reaching task [intraclass correlation coefficients (3,1)=0.804-0.915]. The relationship between WBB and STC showed a significant positive correlation with the pelvic tilt and reaching task (p<0.05). Posterior tilt and erector spinae activation (Lt. L5) showed a significant negative correlation (p<0.05). Left, right tilt and erector spinae activation (L5) showed a significant negative correlation (p<0.05). Conclusions: This study confirmed the advantages of the STC and found efficiency as an objective measuring device of pelvic mobility.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.1-4
• /
• 2004

In this paper. applicability of high early strength type AE water reducing agent(HESAEWA) developed by the authors is discussed by applying Mock-up test. For fresh concrete properties, concrete using existing AE water reducing agent(EAEWRA) and HESAEW A meets the target slump and air content at jobsite. Setting time of concrete using HESAEWA is shorter than that using EAEWRA. Remarkable variance of bleeding and settlement is not observed with type of AE water reducing agent. For hardened concrete properties, use of HESAEW A results in higher strength development compared with that of EAEWRA at standard curing and in field curing condition. Reaching time to accomplish 5MPa of compressive strength. which is possible to remove side form. is taken using HESAEWA earlier than that of EAEWRA by 1day. Therefore, it is confirmed that use of HESAEWA can meet the requirements of general quality of concrete and achieve high early strength development as well as has a desirable field applicability.

• The Journal of Korean Physical Therapy
• /
• v.17 no.2
• /
• pp.11-22
• /
• 2005

Purpose: The purpose of this study was to investigate the effects of aquatic health exercise program for the old. Methods: 20 healthy female with an average age of 71years($71{\pm}4.2$), were participated in this study. The aquatic health exercise program that include warm-up, stretching, strengthening exercise, WATSU and cool-down was performed in the pool two times a week for eight weeks(40min per one session). Body composition, strength of the both knee flexors and extensors, balance ability(sway area and path), whole body reaction time and flexibility(forward reaching test in long sitting) were measured before and after exercise. The data was analyzed with paired t-test to determine significant differences of all suggested factors between pre and post-exercise by make use of the SPSS(ver 10.0) package program. Results: The strength of the both knee flexors and extensors were increased significantly(right knee; p<0.01, left knee; p<0.05). Anteroposterior sway area (p<0.01), and sway path (p<0.001) of both leg were reduced significantly with eyes closed and opened. Whole body reaction time by optical stimulation was increased significantly (p<0.01) but whole body reaction time by auditory stimulation was no significant difference. The flexibility was increased significantly (p<0.01). Conclusion: Aquatic health exercise program can improve muscle strength, balance, whole body reaction, and flexibility.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1133-1138
• /
• 2012

In the paper, design of nonlinear sliding surfaces which are based on optimal control is studied, The state trajectory by the input of optimal control was obtained by Frobenius theorem and matrix decomposition method, was set the nonlinear sliding surfaces of the system. The states is maintained to sliding surfaces from initial states. As the result, robustness of the system can be guaranteed throughout an entire response of the system starting form the initial time instance, the uncertainty and external disturbance that can occur during the reaching time is removed, the problem of large control input was solved, and setting the sliding surfaces optimal path was able to reduce the tracking time. The validity of the proposed control scheme is shown in computer simulation for inverted pendulum.

• Journal of the Korean Society of Combustion
• /
• v.10 no.3
• /
• pp.25-33
• /
• 2005

Fast-time instability is investigated for diffusion flames with Lewis numbers greater than unity by employing the numerical technique called the Evans function method. Since the time and length scales are those of the inner reactive-diffusive layer, the problem is equivalent to the instability problem for the $Li\tilde{n}\acute{a}n#s$ diffusion flame regime. The instability is primarily oscillatory, as seen from complex solution branches and can emerge prior to reaching the upper turning point of the S-curve, known as the $Li\tilde{n}\acute{a}n#s$ extinction condition. Depending on the Lewis number, the instability characteristics is found to be somewhat different. Below the critical Lewis number, $L_C$, the instability possesses primarily a pulsating nature in that the two real solution branches, existing for small wave numbers, merges at a finite wave number, at which a pair of complex conjugate solution branches bifurcate. For Lewis numbers greater than $L_C$, the solution branch for small reactant leakage is found to be purely complex with the maximum growth rate found at a finite wave number, thereby exhibiting a traveling nature. As the reactant leakage parameter is further increased, the instability characteristics turns into a pulsating type, similar to that for L < $L_C$.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.383-394
• /
• 2007

Due to the clutch's non-linear dynamics, time-delays, external disturbance and parameter uncertainty, the automated clutch is difficult to control precisely during the launch process or automatic mechanical transmission (AMT) vehicles. In this paper, an enhanced fuzzy sliding mode controller (EFSMC) is proposed to control the automated clutch. The sliding and global stability conditions are formulated and analyzed in terms of the Lyapunov full quadratic form. The chattering phenomenon is handled by using a saturation function to replace the pure sign function and fuzzy logic adaptation system in the control law. To meet the real-time requirement of the automated clutch, the region-wise linear technology s adopted to reduce the fuzzy rules of the EFSMC. The simulation results have shown hat the proposed controller can achieve a higher performance with minimum reaching time and smooth control actions. In addition, our data also show that the controller is effective and robust to the parametric variation and external disturbance.

• Korean System Dynamics Review
• /
• v.4 no.2
• /
• pp.95-130
• /
• 2003

The purpose of this study is to find what causes make public projects hold off, going beyond the planned deadline and budget. Using System Dynamics(SD) and their derivative Urban Dynamics(UD) models, it intends to analyze major feedback loops based on VENSIM and to simulate them with STELLA software, all of which are interrelated with various causes of project delay. To prevent or ameliorate project delay, first of all it advises to focus on endogenous delaying factors not exogenous ones. These factors either reinforce or balance certain loops in complex causal structure, In the case example on the Cremation Building Project in Cheongju, Residents’ participation demand make negotiation put off and delayed negotiation reinforces administrative-expediency planning in order to observe a time limit, on the other hand, once building consensus, it increase both the level of planning performance and public trust. In the meantime, the real planning process used to neglect residents opinions and manage public grievance only through compensation, he a result of simulation, visible fruit of negotiation in the initial phase seems to be not satisfactory owing to funds and time consumed, but after reaching an mutual agreement among stakeholders, planning performance is effective and strategic than administrative-expediency planning viewed in both financial and time angle. It proposes to devise specific tools schematizing project implementation. In order to upgrade the quality of project management, it recommends for planners to adopt key concepts based on SD/UD diagrams and causal loops, which would contribute to enriching Planning abbots.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.155-163
• /
• 2005

Pressure heating rollers with temperature control were mounted to a flat cable laminating machine (FCLM). Pressure heating rollers should be heated up to the setting temperature $(175^{\circ}C)$ and kept on to producing good quality flexible flat cables (FFC). Existing Pressure heating rollers took more than 70minutes to the setting temperature and did not keep on the setting temperature in production. Temperature controller, electric power controller, material and diameter of rollers and heat capacities were changed to improve the temperature control of the pressure heat rollers for better production of the FFC. Thus, the reaching time to the setting temperature (RT), temperature stability time (TST) and temperature hunting (TH) were measured and compared with the existing pressure rollers case. The RT of A roller was shortened by 50minutes, and B roller was shortened by 15minutes. The TST of A roller was shortened by 13minutes, and B roller was shortened by 15minutes. The THs of both A and B rollers were settled up to ${\pm}5^{\circ}C$. Finally, the productivity of the FCLM and the quality of the FFC were increased.