• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.43-51
• /
• 2022

This study was conducted to investigate the effect of ventilation at high temperature on the control of powdery mildew, silverleaf whitefly two-spotted spider mite occurred at Korean melon cultivation greenhouse, and on leaf rolling and flowering of the plant in summer season. 'Alchanggul' grafted onto 'Hidden Power' rootstock was planted on soil bed with the distance of 40 cm. Three ventilation temperatures of 45℃, 40℃, and 35℃ as set points were compared. Ventilation treatment was done by control of side window operation from 18th June to 13th July when silverleaf whitefly, mite, and powdery mildew were occurred in all greenhouses. The temperature inside greenhouse was increased up to the set temperature point on sunny days and maintained for about 9 hours with high relative humidity at 45℃ condition. The differences of day maximum air temperature and day minimum RH were the highest at 45℃ treatment. After 11 days of treatments, the damage by powdery mildew and two-spotted spider mite was almost recovered at 45℃ treatment but not at 40 and 35℃. The population of silverleaf whitefly and two-spotted spider mite were significantly decreased at 45℃ treatment at 14 days after treatment, while powdery mildew symptom was not significantly decreased. Leaf rolling was observed at high temperature but not severe at 45℃ treatment. After 26 days of treatments, female flowers did not bloom at all at 45℃ treatment, and the number of male flowers was 1.2 among 15 nodes of newly grown shoots. As the result, it indicates that ventilation at the high temperature of 45℃ for about 2 to 3 weeks can be an applicable method to control above mentioned pests and disease, and to recover the vegetative growth of Korean melon by reducing flowering of the plant.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.517-534
• /
• 2021

Hydrogen fuel is emerging as an new energy source to replace fossil fuels in that it can solve environmental pollution problems and reduce energy imbalance and cost. Since hydrogen is eco-friendly but highly explosive, there is a high concern about fire and explosion accidents of hydrogen fueled vehicles. In particular, in semi-enclosed spaces such as tunnels, the risk is predicted to increase. Therefore, this study was conducted on the applicability of the equivalent TNT model and the numerical analysis method to evaluate the hydrogen explosion pressure in the tunnel. In comparison and review of the explosion pressure of 6 equivalent TNT models and Weyandt's experimental results, the Henrych equation was found to be the closest with a deviation of 13.6%. As a result of examining the effect of hydrogen tank capacity (52, 72, 156 L) and tunnel cross-section (40.5, 54, 72, 95 m²) on the explosion pressure using numerical analysis, the explosion pressure wave in the tunnel initially it propagates in a hemispherical shape as in open space. Furthermore, when it passes the certain distance it is transformed a plane wave and propagates at a very gradual decay rate. The Henrych equation agrees well with the numerical analysis results in the section where the explosion pressure is rapidly decreasing, but it is significantly underestimated after the explosion pressure wave is transformed into a plane wave. In case of same hydrogen tank capacity, an explosion pressure decreases as the tunnel cross-sectional area increases, and in case of the same cross-sectional area, the explosion pressure increases by about 2.5 times if the hydrogen tank capacity increases from 52 L to 156 L. As a result of the evaluation of the limiting distance affecting the human body, when a 52 L hydrogen tank explodes, the limiting distance to death was estimated to be about 3 m, and the limiting distance to serious injury was estimated to be 28.5~35.8 m.

• Land and Housing Review
• /
• v.12 no.2
• /
• pp.33-45
• /
• 2021

Due to recent changes in government policy, officetels have received attention as alternative assets, along with the uplift of office and apartment prices in Seoul. However, the current officetel price indexes use small-size samples and, thus, there is a critique on their accuracy. They rely on valuation prices which lag the market trend and do not properly reflect the volatile nature of the property market, resulting in 'smoothing'. Therefore, the purpose of this paper is to create the officetel price index using transaction data. The data, provided by the Ministry of Land, Infrastructure and Transport from 2005 to 2020, includes sales prices and rental prices - Jeonsei and monthly rent (and their combinations). This study employed a repeat sales model for sales, jeonsei, and monthly rent indexes. It also contributes to improving conversion rates (between deposit and monthly rent) as a supplementary indicator. The main findings are as follows. First, the officetel price index and jeonsei index reached 132.5P and 163.9P, respectively, in Q4 2020 (1Q 2011=100.0P). However, the rent index was approximately below 100.0. Sales prices and jeonsei continued to rise due to high demand while monthly rent was largely unchanged due to vacancy risk. Second, the increase in the officetel sales price was lower than other housing types such as apartments and villas. Third, the employed approach has seen a potential to produce more reliable officetel price indexes reflecting high volatility compared to those indexes produced by other institutions, contributing to resolving 'smoothing'. As seen in the application in Seoul, this approach can enhance accuracy and, therefore, better assist market players to understand the market trend, which is much valuable under great uncertainties such as COVID-19 environments.

• Journal of Popular Narrative
• /
• v.26 no.2
• /
• pp.9-37
• /
• 2020

The present study examines the transnational "Hallyu" (the Korean wave) phenomenon after the 1990s in the context of a solidarity movement of East Asian women. It also focuses on the passion for the world stage given the cultural industry was supported by the government as a "chimney-less factory" during the IMF financial crisis. Over the past twenty years and through Hallyu 1.0, Hallyu 2.0, and Hallyu 3.0, "K-entertainment" has been advocated, as a concept that encompasses K-drama, K-pop, etc. in the cultural industry. Furthermore, everything Korean, through K-culture, is being put at the forefront. However, there is insufficient discussion regarding the actions of the women who led the Korean wave. This paper examines the female fans and girl groups who played leading roles in the rise of popular culture and its transnational prominence within the context of the female agency and female labor involved. The lack of acknowledgment of their roles is linked to the current erasure of the discussion on the female youth. Discussion on "woman" is still limited to the domain of reproduction in the generational discussion that has replaced the existing nation-state or class led discussions in the current era of neoliberalism. However, since The reboot or the popularity of feminism in recent years, the interest in the female narrative, in works such as 'Kim Ji-young, Born 1982' has been expanding beyond East Asia to the rest of the world. Just as Hallyu was created by women in the beginning, there is a new trend in which women across national borders are joining in solidarity. As such, the present study attempts to prove that the female fan, girl group, and female youths must be one meta-narrative through a feminist reading, rather than individuals with separate identities.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.4
• /
• pp.295-304
• /
• 2022

The purpose of this study is to detect the sorghum panicle using YOLOv5 based on RGB images acquired by a unmanned aerial vehicle (UAV) system. The high-resolution images acquired using the RGB camera mounted in the UAV on September 2, 2022 were split into 512×512 size for YOLOv5 analysis. Sorghum panicles were labeled as bounding boxes in the split image. 2,000images of 512×512 size were divided at a ratio of 6:2:2 and used to train, validate, and test the YOLOv5 model, respectively. When learning with YOLOv5s, which has the fewest parameters among YOLOv5 models, sorghum panicles were detected with mAP@50=0.845. In YOLOv5m with more parameters, sorghum panicles could be detected with mAP@50=0.844. Although the performance of the two models is similar, YOLOv5s ( 4 hours 35 minutes) has a faster training time than YOLOv5m (5 hours 15 minutes). Therefore, in terms of time cost, developing the YOLOv5s model was considered more efficient for detecting sorghum panicles. As an important step in predicting sorghum yield, a technique for detecting sorghum panicles using high-resolution RGB images and the YOLOv5 model was presented.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.673-680
• /
• 2022

In this study, based on PLA, we analyzed the Hounsfield Unit (HU) of materials containing 20% each of aluminum, wood, copper, carbon, and marble, and tried to analyze how they affect the image. A cylindrical phantom of 5×30×30 ㎣ (thickness×diameter×height) was fabricated using a entry-level 3D printer. The kV was changed to 80, 100 and 120, and the mAs was changed to 100 and 200 mAs, and the phantom in the center of the table was cross-scanned under a total of six conditions. A circular ROI was set using image J program and the quantification value of the material part HU and the quantification value of the peripheral part CNR were obtained. The HU average of the material part increased in the order of [PLA - wood 20%], [PLA - marble 20%], [PLA - carbon 20%], [PLA 100%], [PLA - aluminum 20%], [PLA - copper 20%] (p<0.05) a negative correlation was confirmed with the HU by increasing kV. It was confirmed that the CNR value in the peripheral area increased in the order of [PLA - marble 20%], [PLA - copper 20%], [PLA - carbon 20%], [PLA - wood 20%], [PLA - aluminum 20%], and [PLA - 100%] (p<0.05). Human organs with similar HU values for each material are [PLA - copper 20%] compact bone, [PLA - aluminum 20%] cancellous bone, [PLA 100%] coagulated blood, [PLA - carbon 20%] and [PLA - marble 20%] liver, muscle, spleen and [PLA - wood 20%] had similar values to fat. In addition, we confirmed the blur phenomenon that blurs the image around the filament with all materials, and confirmed that [PLA 100%] especially has the most blur around the filament. Therefore, it is considered desirable to reflect the HU value of the target organ and consider cloudiness around the phantom when selecting materials for medical phantom fabrication, and this research can provide basic data.

• Journal of Life Science
• /
• v.32 no.11
• /
• pp.872-881
• /
• 2022

In this study, we optimized the composition of the indole-3-acetic acid (IAA) production medium using response surface methodology on Pantoea agglomerans SRCM 119864 isolated from soil. IAA-producing P. aglomerans SRCM 119864 was identified by 16S rRNA gene sequencing. There are 11 intermediate components known to affect IAA production, hence the effect of each component on IAA production was investigated using a Plackett-Burman design (PBD). Based on the PBD, sucrose, tryptone, and sodium chloride were selected as the main factors that enhanced the IAA production at optimal L-tryptophan concentration. The predicted maximum IAA production (64.34 mg/l) was obtained for a concentration of sucrose of 13.38 g/l, of tryptone of 18.34 g/l, of sodium chloride of 9.71 g/l, and of L-tryptophan of 6.25 g/l using a the hybrid design experimental model. In the experiment, the nutrient broth medium supplemented with 0.1% L-tryptophan as the basal medium produced 45.24 mg/l of IAA, whereas the optimized medium produced 65.40 mg/l of IAA, resulting in a 44.56% increase in efficiency. It was confirmed that the IAA production of the designed optimal composition medium was very similar to the predicted IAA production. The statistical significance and suitability of the experimental model were verified through analysis of variance (ANOVA). Therefore, in this study, we determined the optimal growth medium concentration for the maximum production of IAA, which can contribute to sustainable agriculture and increase crop yield.

• Journal of Food Hygiene and Safety
• /
• v.37 no.3
• /
• pp.189-197
• /
• 2022

Asthma is a chronic inflammatory disease characterized by recurring symptoms, airflow obstruction, and bronchial hyper-responsiveness. The onset of asthma for most patients begins early in life, and current asthma treatment with anti-inflammatory agents can have adverse effects, eventually leading to impaired quality of life. In the pathogenesis of asthma, macrophages and basophils play a vital role during progression. Macrophages not only induce inflammation by secreting inflammatory cytokines but also promote DNA damage and mucus production through nitric oxide (NO) production. Basophils enhance eosinophil recruitment and aggravate asthma through the FcεRIα receptor with high affinity for histamine and IgE. Therefore, in this study, we investigated whether the activation of macrophages and basophils is suppressed by the individual extracts of 28 natural products. RAW 264.7 cells (mouse macrophages) were treated with the natural products in LPS, and 4 natural product extracts resulted in decreased NO production. In β-hexosaminidase assay using RBL-2H3 cells (rat basophils), 19 natural product extracts decreased β-hexosaminidase production. In NO production and β-hexosaminidase assay using macrophages and basophils, 3 natural product extracts (Plantago asiatica, Centella asiatica, and Perilla frutescens var. japonica) significantly inhibited NO production and β-hexosaminidase release. Overall, we examined the inhibitory effects of 28 natural product extracts on macrophage and basophil activity, and the findings demonstrated the potential of natural product extracts for treating asthma and macrophage- and basophil-related diseases.

• Journal of Naturopathy
• /
• v.9 no.1
• /
• pp.22-26
• /
• 2020

Purposes: The purposes of this study were to investigate the relationship between the standing position of the subject and the normal standing position(NSP) and the straight standing position(SSP) and to investigate the possibility of different body shape test results depending on the status of the image inspection apparatus. Methods: The images of the NSP and SSP were compared with each other by body line BLS system. Results: At the time of examination, the position of the camera was captured at a position 2.3 m vertically from the posterior position 45 cm behind the subject. This is a privacy protection method for covering the breast of the subject. Results: The physiological characteristics of the anatomical position of the body align image test are the living body. NSP and SSP tests showed different shapes of the pelvis AS(antero-supero) and pelvis rotation in the transverse plane. Shoulder and arm displacement was observed in the trunk extension image capture. Conclusions: In the body alignment test, the pelvis position test images of NSP and SSP are evaluated differently for pelvis rotation, AS, and PS. At the extension position of the trunk, a test of the maximal extension range showed that the left and right shortening of the shoulder anterior muscles could be observed. Inducing and testing the trunk extension is also useful.

• Journal of Internet Computing and Services
• /
• v.22 no.6
• /
• pp.25-32
• /
• 2021

In line with future changes in the marine environment, Aids to Navigation has been used in various fields and their use is increasing. The term "Aids to Navigation" means an aid to navigation prescribed by Ordinance of the Ministry of Oceans and Fisheries which shows navigating ships the position and direction of the ships, position of obstacles, etc. through lights, shapes, colors, sound, radio waves, etc. Also now the use of Aids to Navigation is transforming into a means of identifying and recording the marine weather environment by mounting various sensors and cameras. However, Aids to Navigation are mainly lost due to collisions with ships, and in particular, safety accidents occur because of poor observation visibility due to sea fog. The inflow of sea fog poses risks to ports and sea transportation, and it is not easy to predict sea fog because of the large difference in the possibility of occurrence depending on time and region. In addition, it is difficult to manage individually due to the features of Aids to Navigation distributed throughout the sea. To solve this problem, this paper aims to identify the marine weather environment by estimating sea fog level approximately with images taken by cameras mounted on Aids to Navigation and to resolve safety accidents caused by weather. Instead of optical and temperature sensors that are difficult to install and expensive to measure sea fog level, sea fog level is measured through the use of general images of cameras mounted on Aids to Navigation. Furthermore, as a prior study for real-time sea fog level estimation in various seas, the sea fog level criteria are presented using the Haze Model and Dark Channel Prior. A specific threshold value is set in the image through Dark Channel Prior(DCP), and based on this, the number of pixels without sea fog is found in the entire image to estimate the sea fog level. Experimental results demonstrate the possibility of estimating the sea fog level using synthetic haze image dataset and real haze image dataset.