• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.247-254
• /
• 2014

Strain properties of concrete member which acts as an important factor in the stability of the concrete structure in the event of fire, significantly affected the characteristics of the coarse aggregate, which accounts for most of the volume. For this reason, there are many studies on concrete using artificial lightweight aggregate which has smaller thermal expansion deformation than granite coarse aggregate. But the research is mostly limited on concrete using clay-based lightweight aggregate. Therefore, in this study, the high temperature compressive strength and elastic modulus, thermal strain and total strain, high temperature creep strain of concrete was evaluated. As a result, remaining rate of high-temperature strength of concrete using lightweight aggregate is higher than concrete with general aggregate and it is determined to be advantageous in terms of structural safety and ensuring high-temperature strength from the result of the total strain by loading and strain of thermal expansion. In addition, in the case of high-temperature creep, concrete shrinkage is increased by rising loading and temperature regardless of the type of aggregate, and concrete using lightweight aggregate shows bigger shrinkage than concrete with a granite-based aggregate. From this result, it is determined to require additional consideration on a high temperature creep strain in case of maintaining high temperature like as duration of a fire although concrete using light weight aggregate is an advantage in reducing the thermal expansion strain of the fire.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.10
• /
• pp.5-10
• /
• 2020

As the demand for the recycling of industrial by-products increases due to various environmental restrictions including the prohibition of ocean disposal, various studies regarding the recycling of industrial by-products are currently being carried out. One of the industrial by-product, coal ash is produced from thermal power generation; studies on the recycling of fly ash have been actively carried out and it is currently recycled in various fields. In the case of bottom ash, however, only a portion of the total amount generated is primarily processed into a particle size of 2~4mm or less than 2mm to be used for gardening purpose and light weight aggregate and so on. The remaining amount is buried at ash disposal sites. Therefore, various studies are needed to develop measures to use bottom ash. This study aimed at identifying the optimal particle size and mixing ratio of bottom ash to be used as CLSM aggregate. To this end, it evaluated the usability of bottom ash as CLSM aggregate, by investigating the flowability and strength change characteristics of CLSM produced with regard to the mixing ratio of weathered granite soil and bottom ash, particle size of bottom ash to be mixed and soil binder addition rate and conducting a heavy metal leaching test.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.1
• /
• pp.7-14
• /
• 2015

The aim of this research is suggesting dry processed bottom ash as a new and economical source of lightweight aggregate for mortar and concrete. The dry process of bottom ash is an advance method of water-free and no chloride because only cooled down by double dry conveyer belt systems. Furthermore, because of relatively slow cooling down process helps burning up the remaining carbon in bottom ash. Using this dry process bottom ash, to evaluate the feasibility of using as a lightweight aggregate for mortar and concrete, two-phase of experiments were conducted: 1) improving shape of the bottom ash, and 2) controlling grade of the bottom ash. From the first phase of experiment, additional abrasing process was conducted for round shape bottom ash, hence improved workability and compressive strength was achieved while unit weight was increased comparatively. Based on the better shape of bottom ash, from the second phase, various grades were adopted on cement mortar, standard grade showed the most favorable results on fresh and hardened properties. It is considered that the results of this research contribute on widening sustainable method of using bottom ash based on the dry process and increasing value of bottom ash as a lightweight aggregate for concrete.

• Journal of Aquaculture
• /
• v.17 no.2
• /
• pp.151-157
• /
• 2004

Effects of supplementing selected fatty acids on fatty acid incorporation (17 days) , and progeny production (14 days) in Artemia franciscana (Great Salt Lake, USA) were studied. To compare with the control four diets, which differed in fatty acid composition alone contain Dunalieia tertiolecta and an emulsion either rich in OA (oleic acid, 18: 1 n-9), ARA (arachidonic acid, 20:4n-6), EPA (eicosapentaenoic acid,20:5n-3), or DHA (docosahexaenoic acid, 22:6n-3). Each of these emulsions was supplemented at a ratio of 20 % of the daily dose of D. tertiolecta (% algal dry weight). The initial OA and ARA values were 33.5 and 1.7 mg/g DW of freshly-hatched nauplii, respectively. After 11 days of feeding, these values increased to 38.8 and 7.6 mg/g DW in Artemia receiving the fatty acid sup-plement rich in each of the respective fatty acids. After 14 days, the levels were almost doubled, reaching 62.8 and 13.4 mg/g respectively. On EPA supplementation, its level after 11 days of feeding was 14.3 and 17.3 mg/g in male and female, respectively and was 16.0 and 23.1 mg/g in the male and female after 14 days, respectively. The EPA accumulated more in the body (39.1 mg/g) than in ovisac (16.9 mg/g). In the DHA supplementation group also, DHA levels after 11 days of feeding were 3.1 and 5.5 mg/g in male and female, respectively. After 14 days, the DHA level continued to increase in male. but slightly decreased to 4.6 mg/g in female. It was not richer in ovisac (2.6 mg/g) than in the remaining body of female (4.6 mg/g). In conclusion, fatty acids supplied by a lipid emulsion as a supplement to the algal diet are well incorporated in the adult Artemia. Apart from being an extra source of energy, these emulsions may function as source of HUFA which may play an essential role for growth and progeny production (fecundity) of Artemia.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.30-34
• /
• 2020

Maxillectomy is performed to remove the tumor in the palate, maxillary sinus, buccal mucosa or nasal cavity. The resection range depends on the size and the extent of the tumor and it affects speech production or cause nasal regurgitation during feeding. Obturator can occlude an opening such as an oro-nasal fistula and protect the defect area. Successful reconstrucion of the patient's oral cavity who have gone over the maxillectomy is a difficult task. The condition and number of teeth, the remaining support area, and the extent of the defect area have a great influence on manufacturing the obturator. If these factors are disadvantageous, the prognosis of the prosthesis is uncertain. The final obturator must have a sufficient retention in the patient's oral cavity and must not irritate the surrounding tissue and support area where the resection was performed.In this case, a 55 year old female went through the maxillectomy and the only 3 teeth remained. And the retention of the maxillary prosthesis seems to be poor. So that, we fabricated the closed hollow obturator which has reduced weight compared to the conventional obturator. Consequently the closed hollow obturator can give better sealing and the adaptation.

• Toxicological Research
• /
• v.19 no.1
• /
• pp.21-27
• /
• 2003

A teratogenic study of dimethyl dimethoxy biphenylate derivative (DDB-S) was carried out on Sprague-Dawley rats. DDB-S dissolved in saline was administered to male and female rats by intravenously injection at daily doses of 50 mg/kg, 75 mg/kg, and 100 mg/kg. A half of dams were sacrificed at 20th day of gestation to scrutinize the pregnant performances and fetal development. And the remaining dams were allowed to deliver. The growth, reflex, behaviour and reproductive function of F1 offsprings were examined. There was no treatment-related difference in body weight, food consumption and necropsy findings of dams. No gross, skeletal and visceral abnormalities was observed in F1 fetuses from dams treated with DDB-S. F1 offsprings did not show any treatment-related difference in growth, reflex, behaviour and reproductive performance. At caesarean section of F1 dams, no growth retardation and gross abnormality was observed in F2 fetuses. In conclusion, DDB-S did not show any potential teratogenic effect in rats.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.96-96
• /
• 2017

Rice is a staple food for nearly half of the world's population, with more than 10,000 rice varieties providing almost one-quarter of the global per capita dietary energy supply. Grain size, panicle size and branch number, grain number in a panicle are directly associated with rice productivity. Recently several genes which increase grain yield were identified through map-based cloning. Gn1a, Cytokinin oxidase, is a major grain number QTL and regulates grain number per panicle. Dep1 increases panicle branching and reduced rachis length. SCM2 (APO1) was identified by a QTL for culm strength and increased spikelet number. OsSPL16 (GW8) controls grain size and shape and then increases 1000-weight of seed. In here, to identify genotype of genes related to yield in 400 of rice germplasms possessed in National Institute of Crop Science, we had first chosen 4 of well-known genes related to yield; Gn1a, Dep1, SCM2, and OsSPL16. Among these germplasms, 195, 382, 165, and 353 of germplasms harbored the dominant type of Gn1a, Dep1, SCM2, and OsSPL16, respectively. We grouped these germplasms into a total of 10 groups using genotypes of Gn1a, Dep1, SCM2 and OsSPL16. Most rice germplasms belong to group 1, harbored Gn1a, dep1, gw8 and APO1, and group 10, harbored gn1a, Dep1, GW8 and apo1. Hanareum2 is the highest productive cultivar in Korea but do not have dominant type OsSPL16, so belong to group 1. On the other hand, in the case of Unkwang, belongs to group 10, which has dominant type of OsSPL16 but do not have the remaining genes. We can grasp the differences in rice germplasms through the Profiling of genes related to these grain yield, which will be useful for cross-breeding to integrate grain yield genes. We are continuously observing the genotype and phenotype of rice that possesses grain yield genes.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.51-51
• /
• 2010

Recently just as in the automobile industry, shipbuilders also try to reduce material consumption and weight in order to keep operating costs as low as possible and improve the speed of production. Naturally industry is ever searching for welding techniques offering higher power, higher productivity and a better quality. Therefore it is important to have a details research based on the various welding process applied to steel and other materials, and to have the ability both to counsel interested companies and to evaluate the feasibility of implementation of this process. Submerged-arc welding (SAW) process is usually used about 20% of shipbuilding. Similar to gas metal arc welding(GMAW), SAW involves formation of an arc between a continuously-fed bare wire electrode and the work-piece. The process uses a flux to generate protective gases and slag, and to add alloying elements to the weld pool and a shielding gas is not required. Prior to welding, a thin layer of flux powder is placed on the work-piece surface. The arc moves along the joint line and as it does so, excess flux is recycled via a hopper. Remaining fused slag layers can be easily removed after welding. As the arc is completely covered by the flux layer, heat loss is extremely low. This produces a thermal efficiency as high as 60% (compared with 25% for manual metal arc). SAW process offers many advantages compared to conventional CO2 welding process. The main advantages of SAW are higher welding speed, facility of workers, less deformation and better than bead shape & strength of welded joint because there is no visible arc light, welding is spatter-free, fully-mechanized or automatic process, high travel speed, and depth of penetration and chemical composition of the deposited weld metal. However it is difficult to application of thin plate according to high heat input. So this paper has been focused on application of the field according to SAW process for thin plate in ship-structures. For this purpose, It has been decided to optimized welding condition by experiments, relationship between welding parameters and bead shapes, mechanical test such as tensile and bending. Also finite element(FE) based numerical comparison of thermal history and welding residual stress in A-grade 3.2 thickness steel of SAW been made in this study. From the result of this study, It makes substantial saving of time and manufacturing cost and raises the quality of product.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.2
• /
• pp.167-177
• /
• 2013

The use of mechanical anastomosis coupler instead of sutures has been increasing in microvascular anastomosis surgery. However, non-biodegradable anastomosis coupler has problems such as not only inflammatory reaction but also remaining permanently in operation wound. Therefore, we fabricated biodegradable anastomosis coupler using injection molding process to overcome the limitation of non-biodegradable anastomosis coupler. In various injection molding process conditions, the shrinkage was calculated with different cylinder temperatures and injection molding pressures and anastomotic strength was measured. As a result, changes in shrinkage hole part larger than the pin part. In addition, the shrinkage in the cylinder at higher temperatures increase. However, the higher the injection pressure, shrinkage tends to decrease, respectively. In-vitro degradation behavior of PCL anastomotic coupler evaluated for 12 weeks, water uptake was increased and molecular weight was accompanied by a reduction in mass of the biological degradation and reduction of anastomotic strength was confirmed. However, decreased levels of anastomotic strength enough to exceed the requirements of preclinical surgery, PCL microvascular anastomosis coupler suitable candidate materials that could identify.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.3
• /
• pp.394-402
• /
• 2003

Individual and combined supplementation of phosphorus-adequate, wheat-based broiler diets with exogenous phytase and xylanase was evaluated in three experiments. The effects of the enzyme combination in lysine-eficient diets containing wheat and sorghum were more pronounced than those of the individual feed enzymes. The inclusion of phytase plus xylanase improved (p<0.05) weight gains (7.3%) and feed efficiency (7.0%) of broilers (7-28 days post-hatch) and apparent metabolisable energy (AME) by 0.76 MJ/kg DM. Phytase plus xylanase increased (p<0.05) the overall, apparent ileal digestibility of amino acids by 4.5% (0.781 to 0.816); this was greater than the responses to either phytase (3.6%; 0.781 to 0.809) or xylanase (0.7%; 0.781 to 0.784). Absolute increases in amino acid digestibility with the combination exceeded the sum of the individual increases generated by phytase and xylanase for alanine, aspartic acid, glutamic acid, glycine, histidine, isoleucine, phenylalanine, threonine, tyrosine and valine. These synergistic responses may have resulted from phytase and xylanase having complementary modes of action for enhancing amino acid digestibilities and/or facilitating substrate access. The two remaining experiments were almost identical except wheat used in Experiment 2 had a higher phytate concentration and a lower estimated AME content than wheat used in Experiment 3. Individually, phytase and xylanase were generally more effective in Experiment 2, which probably reflects the higher dietary substrate levels present. Phytase plus xylanase increased (p<0.05) gains (15.4%) and feed efficiency (7.0%) of broiler chicks from 4-24 days post-hatch in Experiment 2; whereas, in Experiment 3, the combination increased (p<0.05) growth to a lesser extent (5.6%) and had no effect on feed efficiency. This difference in performance responses appeared to be 'rotein driven'as the combination increased (p<0.05) nitrogen retention in Experiment 2 but not in Experiment 3; whereas phytase plus xylanase significantly increased AME in both experiments. In Experiments 2 and 3 the combined inclusion levels of phytase and xylanase were lower that the individual additions, which demonstrates the benefits of simultaneously including phytase and xylanase in wheat-based poultry diets.