Browse > Article
http://dx.doi.org/10.4334/JKCI.2014.26.3.247

Evaluation on Strain Properties of 60 MPa Class High Strength Concrete according to the Coarse Aggregate Type and Elevated Temperature Condition  

Yoon, Min-Ho (Dept. of Architectural Engineering, Chungnam National University)
Choe, Gyeong-Cheol (Dept. of Architectural Engineering, Chungnam National University)
Lee, Tae-Gyu (DSME Construction)
Kim, Gyu-Yong (Dept. of Architectural Engineering, Chungnam National University)
Publication Information
Journal of the Korea Concrete Institute / v.26, no.3, 2014 , pp. 247-254 More about this Journal
Abstract
Strain properties of concrete member which acts as an important factor in the stability of the concrete structure in the event of fire, significantly affected the characteristics of the coarse aggregate, which accounts for most of the volume. For this reason, there are many studies on concrete using artificial lightweight aggregate which has smaller thermal expansion deformation than granite coarse aggregate. But the research is mostly limited on concrete using clay-based lightweight aggregate. Therefore, in this study, the high temperature compressive strength and elastic modulus, thermal strain and total strain, high temperature creep strain of concrete was evaluated. As a result, remaining rate of high-temperature strength of concrete using lightweight aggregate is higher than concrete with general aggregate and it is determined to be advantageous in terms of structural safety and ensuring high-temperature strength from the result of the total strain by loading and strain of thermal expansion. In addition, in the case of high-temperature creep, concrete shrinkage is increased by rising loading and temperature regardless of the type of aggregate, and concrete using lightweight aggregate shows bigger shrinkage than concrete with a granite-based aggregate. From this result, it is determined to require additional consideration on a high temperature creep strain in case of maintaining high temperature like as duration of a fire although concrete using light weight aggregate is an advantage in reducing the thermal expansion strain of the fire.
Keywords
artificial lightweight aggregate; aggregate density; ISO-834 standard fire curve; thermal strain; steady state creep;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Abeles, P. W. and Bardhan-Roy, B. K., Prestressed Concrete Designer's Handbook, In: Cement and Concrete Association, Wexham Springs, A Viewpoint Publication, 1981, pp. 20-41.
2 Kim, G. Y., Kim, Y. S., Choe, G. C., Park, H. G., and Lee, T. G., "Evaluation on Mechanical Properties of High Strength Light-Weight Concrete with Elevated Temperature and loading," Journal of the Korea Concrete Institute, Vol. 23, No. 6, 2011, pp. 723-730.   과학기술학회마을   DOI   ScienceOn
3 Neville, A. M., Properties of Concrete, 4th ed. Longman, 1995, pp. 108-475.
4 Kong, F. K., Evans, R. H., Cohen, E., and Roll, F., Handbook of Structural Concrete, Pitman Books Limited, 1983, pp. 215-578.
5 Culver, C. G. and Crist, R. A., "Fire Performance of Military Record Center," ACI Journal, 1975.
6 Oh, C. H., "A Study on Damage and Repair of Concrete Buildings after a Fire," Doctoral Dissertation of Tokyo Institute of Technology, 1985, pp. 3-22.
7 Turker, P., Erdogdu, K., and Erdogan, B., "Investigation of the Various Type of Aggregate Mortar Exposed to Fire," Journal of Cement Concrete World, 2001, Vol. 6, Issue 31, pp. 52-69.
8 Lim, J. H., "The Experimental Study of High-Strength Lightweight Concrete for the Enhancement of its Compressive Strength," Master's Thesis of Kyonggi University, 2010, pp. 4-13.
9 Wu, B., Lam, S. S., Liu, Q., Chung, Y. M., and Ho, L. F. Y., "Creep Behavior of High-Strength Concrete with Polypropylene Fibers at Elevated Temperatures," ACI Materials Journal, Vol. 107, No. 2, 2010, pp. 176-184.
10 RILEM TC 129-MHT, "Test Methods for Mechanical Properties of Concrete at High Temperatures: Part 8 Steady-State Creep and Creep Recovery for Service and Accident Conditions," Materials and Structures, Vol. 33, 2000, pp. 6-13.   DOI
11 Harada, T., Takeda, J., Yamane, S., and Furumura, F., Strength, Elasticity and Thermal Properties of Concrete Subjected to Elevated Temperatures, ACI American Concrete Institute, Special Publication, 1972, SP-34, pp. 377-406.
12 Hammer, T. A., "High-Strength Concrete Phase 3, Compressive Strength and E-Modulus at Elevated Temperatures, Fire Resistance," Report 6.1, SINTEF Structures and Concrete, STF 70 A95023, 1995, pp. 18-57.
13 Andic-Cakir, O. and Hizal, S., "Influence of Elevated Temperatures on the Mechanical Properties and Microstructure of Self Consolidating Lightweight Aggregate Concrete," Construction and Building Materials, Vol. 34, 2012, pp. 575-583.   DOI   ScienceOn
14 Yeo, I. W. and John, Y. W., "A Study on the Behaviors of Granites Subjected to Thermal Stress," Journal of the Korean Institute of Mineral and Energy Resources Engineers, Vol. 29, No. 5, 1992, pp. 263-275.   과학기술학회마을
15 Sullivan, P. J. E., et. al., "Performance of Concrete at Elevated Temperatures (as Measured by the Reduction in Compressive Strength)," Fire Technology, Vol. 28, No. 3, 1992, pp. 351-359.
16 Hertz, K. D., "Concrete Strength for Fire Safety Design," Magazine of Concrete Research, Vol. 57, No. 8, 2005, pp. 445-453.   DOI   ScienceOn