• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.58-63
• /
• 2008

A fast maximum efficiency control scheme of a stator flux-oriented control of an induction motor is proposed. Three inputs of given three magnetic fluxes are calculated. Then magnetic flux for minimum input is calculated by quadratic interpolation method and maximum efficiency control is fulfilled with the calculated magnetic flux for minimum input. Simulation results verify the effectiveness of the scheme.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.525-533
• /
• 2008

This study presents a pansharpening method, so called FitPAN, to synthesize multispectral images at a higher resolution by exploiting a high-resolution image acquired in panchromatic modality. FitPAN is a modified version of the quadratic programming approach proposed in (Lee, 2008), which is designed to generate synthesized multispectral images similar to the multispectral images that would have been observed by the corresponding sensor at the same high resolution. The proposed scheme aims at reconstructing the multispectral images at the higher resolution with as less spectral distortion as possible. This study also proposes a sharpening process to eliminate some distortions appeared in the fused image of the higher resolution. It employs the Point-Jacobian MAP iteration utilizing the contextual information of the original panchromatic image. In this study, the new method was applied to the IKONOS 1m panchromatic and 4m multispectral data, and the results were compared with them of several current approaches. Experimental results demonstrate that the proposed scheme can achieve significant improvement in both spectral and block distortion.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.3166-3187
• /
• 2017

For "generic" multivariate public key cryptography (MPKC) systems, experts believe that the Unbalanced Oil-Vinegar (UOV) scheme is a feasible signature scheme with good efficiency and acceptable security. In this paper, we address two problems that are to find inversion solution of quadratic multivariate equations and find another structure with some random Oil-Oil terms for UOV, then propose a novel signature scheme based on hyper-sphere (HS-Sign for short) which directly answers these two problems. HS-Sign is characterized by its adding Oil-Oil terms and more advantages compared to UOV. On the one side, HS-Sign is based on a new inversion algorithm from hyper-sphere over finite field, and is shown to be a more secure UOV-like scheme. More precisely, according to the security analysis, HS-Sign achieves higher security level, so that it has larger security parameters choice ranges. On the other side, HS-Sign is beneficial from both the key side and computing complexity under the same security level compared to many baseline schemes. To further support our view, we have implemented 5 different attack experiments for the security analysis and we make comparison of our new scheme and the baseline schemes with simulation programs so as to show the efficiencies. The results show that HS-Sign has exponential attack complexity and HS-Sign is competitive with other signature schemes in terms of the length of the message, length of the signature, size of the public key, size of the secret key, signing time and verification time.

• Journal of the Korean School Mathematics Society
• /
• v.11 no.3
• /
• pp.439-466
• /
• 2008

In this paper, we aim to draw up an alternative instruction scheme by designing a web based instruction model on mathematics. Some learning materials are developed according to the scheme, and its educational effects are examined when it is committed to through regular curriculum. The study is composed of three major parts; setting of the theoretical foundation on cultivating Web based educational materials, design and composition of Web based teaching-learning model, and its experiments in the regular class. First of all, we are concerned with the core principles on WBI including the learning theories, developing learner oriented instruction model, design as well as build-up process for education materials, and strategy in instruction. Next, we propose an alternative instruction model for mathematics, in which programs to embody mathematics education and instruction on the Web are constructed, on the while, the study is proceeded through the Web Site. Finally, we design and produce a WBI instruction model on the subject of the plane quadratic curves. This model is examined in the regular class to estimate its educational effects compared with traditional teaching standpoints. Concomitantly, we explore essential elements and the direction of future growth associated with the Web oriented education.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.4
• /
• pp.697-708
• /
• 2019

In this paper, we propose and implement a method to optimize Rainbow for 8 bit MCU(Microcontroller Unit). As quantum computers have been developed, the security of existing cryptography, especially the signature algorithms, has been threatened, so it is necessary to apply a signature scheme with a quantum-resistance to IoT devices. Currently, the proposed PQC(Post Quantum Cryptography) are lattice-based, hash-based, code-based, and MQ(Multivariate Quadratic)-based cryptographic algorithms and signature schemes. In particular, MQ-based signature schemes are faster than conventional signature schemes and are suitable for IoT devices Do. However, it is difficult to apply 8-bit MCU, which has a large key length and large number of computations, to the memory and performance of IoT devices. In this paper, we propose a method of storing Rainbow, which is a MQ-based signing scheme, in 8-bit MCU by dividing the key and optimizing the computation method. By reducing the memory consumption and improving the algorithm speedily, Compare performance.

• Journal of Korea Water Resources Association
• /
• v.41 no.1
• /
• pp.49-63
• /
• 2008

The Bayesian MCMC(Bayesian Markov Chain Monte Carlo) and the MLE(Maximum Likelihood Estimation) methods using a quadratic approximation are applied to perform the at-site low flow frequency analysis at the 4 stage stations (Nakdong, Waegwan, Goryeonggyo, and Jindong). Using the results of two types of the estimation method, the frequency curves including uncertainty are plotted. Eight case studies using the synthetic flow data with a sample size of 100, generated from 2-parmeter Weibull distribution are performed to compare with the results of analysis using the MLE and the Bayesian MCMC. The Bayesian MCMC and the MLE are applied to 36 years of gauged data to validate the efficiency of the developed scheme. These examples illustrate the advantages of the Bayesian MCMC and the limitations of the MLE based on a quadratic approximation. From the point of view of uncertainty analysis, the Bayesian MCMC is more effective than the MLE using a quadratic approximation when the sample size is small. In particular, the Bayesian MCMC is a more attractive method than MLE based on a quadratic approximation because the sample size of low flow at the site of interest is mostly not enough to perform the low flow frequency analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.520-523
• /
• 2004

A phase-locked loop control system designed by using the linear quadratic regulator approach is presented in this paper. The system thus designed is optimal system when system is in locked state and the parameter value of loop filter which is an active PI filter can be obtained easily. By considering the structure of loop filter of phase-locked loop is included in the process to be controlled, a type 1 servo system can be constructed when voltage control oscillator is considered as an integrator. The integral gain of the proposed system obtained by linear quadratic regulator approach can be used as an optimal value to design the parameter of loop filter. The implemented result in controlling the second-order lag pressure process by using the proposed scheme show that the system response is fast with no overshoot and no steady-state error. Furthermore, the experimental results are also shown in term of output disturbance effect rejection, tracking and process parameter changed.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1872-1882
• /
• 2017

Medium voltage drive systems driven by high-power multi-level inverters operating at low switching frequency can reduce the switching losses of the power device and increase the output power. Employing subsection synchronous current harmonic minimum pulse width modulation (CHMPWM) technique can maintain the total harmonic distortion of current at a very low level. It can also reduce the losses of the system, improve the system control performance and increase the efficiency of DC-link voltage accordingly. This paper proposes a subsection synchronous CHMPWM approach of active neutral point clamped five-level (ANPC-5L) inverter under low switching frequency operation. The subsection synchronous scheme is obtained by theoretical calculation based on the allowed maximum switching frequency. The genetic algorithm (GA) is adopted to get the high-precision initial values. So the expected switching angles can be achieved with the help of sequential quadratic programming (SQP) algorithm. The selection principle of multiple sets of the switching angles is also presented. Finally, the validity of the theoretical analysis and the superiority of the CHMPWM are verified through both the simulation results and experimental results.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.1
• /
• pp.43-56
• /
• 2011

An integrated system composed of guidance, navigation and control (GNC) system for autonomous proximity operations and the docking of two spacecraft was developed. The position maneuvers were determined through the integration of the state-dependent Riccati equation formulated from nonlinear relative motion dynamics and relative navigation using rendezvous laser vision (Lidar) and a vision sensor system. In the vision sensor system, a switch between sensors was made along the approach phase in order to provide continuously effective navigation. As an extension of the rendezvous laser vision system, an automated terminal guidance scheme based on the Clohessy-Wiltshire state transition matrix was used to formulate a "V-bar hopping approach" reference trajectory. A proximity operations strategy was then adapted from the approach strategy used with the automated transfer vehicle. The attitude maneuvers, determined from a linear quadratic Gaussian-type control including quaternion based attitude estimation using star trackers or a vision sensor system, provided precise attitude control and robustness under uncertainties in the moments of inertia and external disturbances. These functions were then integrated into an autonomous GNC system that can perform proximity operations and meet all conditions for successful docking. A six-degree of freedom simulation was used to demonstrate the effectiveness of the integrated system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1085-1091
• /
• 2014

This paper presents the guidance and control design for automatic carrier landing of a UAV (Unmanned Aerial Vehicle). Differently from automatic landing on a runway on the ground, the motion of a carrier deck is not fixed and affected by external factors such as ship movement and sea state. For this reason, robust guidance/control law is required for safe shipboard landing by taking the relative geometry between the UAV and the carrier deck into account. In this work, linear quadratic optimal controller and longitudinal/lateral trajectory tracking guidance algorithm are developed based on a linear UAV model. The feasibility of the proposed control scheme and guidance law for the carrier landing are verified via numerical simulations using X-Plane and Matlab/simulink.