• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.833-840
• /
• 1987

A new Block Truncation Coding(BTC) technique reducing the bit-plane and using differential pulse code modulation (DPCM) is proposed and compared with the conventional BTC methods. A new technique decides whether the subblock can be approximated to be uniform or not. If the subblock can be approximated to be uniform(merge mode), we transmit only the gray-level informantion. It not (split mode), we transmity both the bit-plane and the gray-level information. DPCM method is proposed to the encoding of gray-level information when the subblock can be approximated to be uniform. Also modified quantization method is presented to the encoding of gray-level information when the subblock is not uniform. This technique shows the results of coding 256 level images at the average data rate of about 0.75 bits/pel.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.91-92
• /
• 2007

LR-UWB utilizes BPSK and PPM for the transmission, which embeds the information in the transmitted pulse position. Meanwhile, by using coherent method, there is approximately 3dB enhancement on the BER performance over that using non-coherent method. However, due to the variable channel conditions, conventional system which uses fixed modulation is not efficient. To maximize the efficient and performance, in this paper, we propose an adaptive method including 4PPM+BPSK mode and 2PPM mode, in which the modulation method is dynamically changed depending on the channel condition which is determined according to the preamble correlation output.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.364-368
• /
• 2012

We generate 10 GHz short pulses from a continuous wave laser at 1.5 um by cascaded intensity and phase modulation, followed by chirp compensation using a single mode fiber. The measured spectral and pulse widths are 0.64 nm and 5.7 ps respectively, resulting in the time-bandwidth product of 0.46.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.825-832
• /
• 2000

광섬유 통신 시스템이 고속화되고 장거리를 전송하게 될 수록 편광모드 분산의 중요성은 더욱 부각되어 있다. 따라서 본 논문에서는 복굴절 광섬유에서 비선형 광펄스의 전파특성을 편광 모드 분산의 영향을 고려하여 시뮬레이션하였으며 이러한 현상이 발생되는 것을 알 수 있었다. 그리고 광섬유 비션형성에 의해서 GVD(Group Velocity Dispersion)와 마찬가기로 PMD(Polarization Mode Dispersion)에서도 부분적인 보상 현상이 나타남을 수치 결과를 통해 알 수 있었다. 이러한 광 전송 시뮬레이션을 구현하기 위해서 기존의 단계분할 푸리에 방식 (SS-FM, Split-Step Fourier Method)보다 장거리 전송시 오차의 발생이 적은 단계 분할 유한 요소법)SS-FEM, Split-Step Finite Element Method)을 적용하였으며, 또한 그 단점인 수행 속도를 개선한 희귀 행렬 근사 단계 분할 유한 요소법을 제안하였다. 그 결과 제안된 방법이 기존의 푸리에 연산법이나 일반적인 유한 요소법과 비교하여 더 빠른 수행 속도를 나타내는 것을 알 수 있었다.

• 전기의세계
• /
• v.28 no.1
• /
• pp.43-52
• /
• 1979

Recently, interest in multivalued(MV) logic system has been increased, despites the apparent difficulties for practical application. This is because of the many advantages of the MV compared with the 2-valued logic systems, such as; (a) higher speed of arithmetical operation on account of the smaller number of digits required for a given data, (b) better utilization of data transmission channels on account of the higher information contents per line, (c) potentially higher density of information storage. This paper describes a MV switching theory and experimental MV logic elements based on current-mode logic technique. These elements tried were a 3-stable pulse generator, a ternary AND, a ternary OR, a MT circuit and a ternary inverter. Tristable flops which are indispensable for constituting a ternary shift register are synthesized using these gates. A BCD to TCD decoder, and vice versa, are proposed by using a ternary inverter and some binary gates. Thus, the feasibility of a large scale MV digital system has been demonstrate.

• Journal of Power Electronics
• /
• v.12 no.5
• /
• pp.708-714
• /
• 2012

This paper presents a new interleaved pulse-width modulation (PWM) boost-flyback converter to achieve power factor correction (PFC) and regulate DC bus voltage. The adopted boost-flyback converter has a high voltage conversion ratio to overcome the limit of conventional boost or buck-boost converter with narrow turn-off period. The proposed converter has wide turn-off period compared with a conventional boost converter. Thus, the higher output voltage can be achieved in the proposed converter. The interleaved PWM can further reduce the input and output ripple currents such that the sizes of inductor and capacitor are reduced. Since boundary conduction mode (BCM) is adopted to achieve power factor correction, power switches are turned on at zero current switching (ZCS) and switching losses are reduced. The circuit configuration, principle operation, system analysis, and design consideration of the proposed converter are presented in detail. Finally, experiments conducted on a laboratory prototype rated at 500W were presented to verify the effectiveness of the converter.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.796-805
• /
• 2014

A digital controller with a low-power approach for point-of-load synchronous buck converters is discussed and compared with its analog counterpart to confirm its feasibility for system integration. The tri-mode digital controller IC in $0.35{\mu}m$ CMOS process is presented to demonstrate solutions that include a PID, quarter PID, and robust RST compensators. These compensators address the steady-state, stand-by, and transient modes according to the system operating point. An idle-tone free condition for ${\Sigma}-{\Delta}$ DPWM reduces the inherent tone noise under DC-excitation. Compared with that of the traditional approach, this condition generates a quasi-pure modulation signal. Experimental results verify the closed-loop performances and confirm the power-saving mechanism of the proposed controller.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.196-198
• /
• 2007

본 논문에서는 가전 및 사무용 전원장치가 대기모드 상태에 있는 경우의 전력소모를 줄일 수 있는 PWM(Pulse Width Modulation) IC를 설계하였다. 설계된 PWM IC는 전원장치가 정상상태에서 동작하는 경우 전원장치 출력단에서 피드백 받은 신호의 크기에 따라 40 ~ 60kHz의 구동 주파수를 가지는 스위칭 소자 구동 신호를 내보내고, 대기모드 상태에서 동작하는 경우에는 최소 33KHz의 주파수를 가지는 신호를 내보내도록 설계되었다. 각각의 경우에 스위칭 소자 구동 신호의 듀티비는 정상상태인 경우에는 20 ~ 88%, 대기모드 상태인 경우에는 1%이내가 되도록 설계하였다. 시뮬레이션을 통해 검증한 결과 대기모드 상태에서 전원장치의 전력소모량은 0.2W 정도로 작게 나타남을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.9
• /
• pp.762-765
• /
• 1994

Picosecond time-resolved resonance Raman spectroscopy has been used to study the photochemistry of Cr(CO$)_6$ in cyclohexane following photoexcitation at 266 nm. Photodissociative loss of CO is found to occur within our pulse width of ${\leq}$5 ps by probing the 533 c$m^{-1}$ vibrational mode of ground state Cr(CO$)_6$. The subsequent dynamics after photodissociation are interpreted in terms of solvation, vibrational and electronic relaxations. The vibrational relaxation time of 100 ps and 83 ps are observed by monitoring v=O and v=l of the 381 c$m^{-1}$ transient mode, respectively. No evidence was found for solvation and electronic relaxation occurring on a time scale of ${\leq}$5 ps.

• ETRI Journal
• /
• v.41 no.1
• /
• pp.124-132
• /
• 2019

The energy balance (EB) model of a primary side regulation (PSR) fly-back converter in the discontinuous conduction mode (DCM) is discussed in this paper. Based on this EB model, the stability of a PSR fly-back converter in the pulse skipping mode (PSM) is analyzed, and a self-adapting modulation factor control strategy is proposed. Theoretical analysis and simulation results show that by saving an optocoupler and correlative circuits, which are necessary in traditional PSM fly-back converters, the modulation factor tolerance controlled by this method is 1.26% on average, corresponding to the ideal value. Compared with traditional fly-back PSM controllers, the power saved in the sampler/comparator modules is 87% on average for a load range of $1{\Omega}$ to $1k{\Omega}$.