Browse > Article
http://dx.doi.org/10.6113/JPE.2012.12.5.708

Interleaved Boost-Flyback Converter with Boundary Conduction Mode for Power Factor Correction  

Lin, Bor-Ren (Dept. of Electrical Eng., National Yunlin University of Science and Technology)
Chien, Chih-Cheng (Dept. of Electrical Eng., National Yunlin University of Science and Technology)
Publication Information
Journal of Power Electronics / v.12, no.5, 2012 , pp. 708-714 More about this Journal
Abstract
This paper presents a new interleaved pulse-width modulation (PWM) boost-flyback converter to achieve power factor correction (PFC) and regulate DC bus voltage. The adopted boost-flyback converter has a high voltage conversion ratio to overcome the limit of conventional boost or buck-boost converter with narrow turn-off period. The proposed converter has wide turn-off period compared with a conventional boost converter. Thus, the higher output voltage can be achieved in the proposed converter. The interleaved PWM can further reduce the input and output ripple currents such that the sizes of inductor and capacitor are reduced. Since boundary conduction mode (BCM) is adopted to achieve power factor correction, power switches are turned on at zero current switching (ZCS) and switching losses are reduced. The circuit configuration, principle operation, system analysis, and design consideration of the proposed converter are presented in detail. Finally, experiments conducted on a laboratory prototype rated at 500W were presented to verify the effectiveness of the converter.
Keywords
Interleaved PWM; PFC; ZCS;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 M. Jabbari and H. Farzanehfard, "A new soft switching step-down/up converter with inherent PFC performance," Journal of Power Electronics, Vol. 9, No. 6, pp. 835-844, Nov. 2009.
2 Y.-C. Kim, L. Jin, J.-M. Lee, and J. Choi, "Direct digital control of single-phase AC/DC PWM converter system," Journal of Power Electronics, Vol. 10, No. 5, pp. 518-527, Sep. 2010.   과학기술학회마을   DOI   ScienceOn
3 J. J. Lee, J. M. Kwon, E. H. Kim, W. Y. Choi and B. H. Kwon, "Single-stage single-switch PFC flyback converter using a synchronous rectifier," IEEE Trans. Ind. Electron., Vol. 55, No. 3, pp. 1352-1365, Mar. 2008.   DOI   ScienceOn
4 Y. M. Liu and L. K. Chang, "Single-stage soft-switching AC-DC converter with input-current shaping for universal line applications," IEEE Trans. Ind. Electron., Vol. 56, No. 2, pp. 467-478, Feb. 2000.
5 O. Carcia, J. A. Cobos, R. Prieto, P. Alou, and J. Uceda, "Single phase power factor correction: A survey," IEEE Trans. Power Electron., Vol. 18, No. 3, pp. 749-755, May 2003.   DOI   ScienceOn
6 C. M. Wildrick, F. C. Lee, B. H. Cho, and B. Choi, "A method of defining the load impedance specification for a stable distributed power system," IEEE Trans. Power Electron., Vol. 10, No. 3, pp. 280-285, May 1995.   DOI   ScienceOn
7 X. G. Feng, J. J. Liu, and F. C. Lee, "Impedance specifications for stable dc distributed power systems," IEEE Trans. Power Electron., Vol. 17, No. 2, pp. 157-162, Mar. 2002.   DOI   ScienceOn
8 R. J. Wai and R. Y. Duan, "High-efficiency DC/DC converter with high voltage gain," IEE Proc. - Electric Power Applications, Vol. 152, No. 4, pp. 793-802, 2005.   DOI   ScienceOn
9 L. Huber and M. M. Jovanovic, "A design approach for serere power supplies for networking," in Proc. of IEEE APEC Conf., pp. 1163-1169, 2000.
10 Q. Hu and Z. Lu, "A novel step-up VRM two-phase interleaved coupled-boost converter," in Proc. of IEEE PESC Conf., pp. 1-5, 2006.
11 S. Senini and P. J. Wolfs, "The coupled inductor filter: analysis and design for AC systems," IEEE Trans. Ind. Electron., Vol. 45, No. 4, pp. 574-578, Aug. 1998.   DOI   ScienceOn
12 M. Xu, J. Zhou, K. Yao, and F. C. Lee, "Small signal modeling of a high bandwidth voltage regulator using coupled inductors," IEEE Trans. Power Electron., Vol. 22, No. 2, pp. 399-406, Mar. 2007.   DOI   ScienceOn
13 W. Li and X. He, "ZVT interleaved boost converters for high-efficiency, high step-up DC-DC conversion," IET Proc. - Electric Power Applications, Vol. 1, No. 2, pp. 284-290, 2007.   DOI   ScienceOn
14 X.-S. Pu, T.-H. Nguyen, D.-C. Lee, and S.-G. Lee, "Identification of DC-link capacitance for single-phase AC/DC PWM converters," Journal of Power Electronics, Vol. 10, No.3, pp.270-276, May 2010.   DOI   ScienceOn
15 K.-T. Kim, W.-Y. Choi, J.-M. Kwon, and B.-H. Kwon, "A single-stage AC/DC converter with low voltage stresses and reduced switching losses," Journal of Power Electronics, Vol. 9, No. 6, pp.823-834, Nov. 2009.   과학기술학회마을
16 Q. Zhao, F. Tao, and F. C. Lee, "A front-end dc/dc converter for network server applications," in Proc. of IEEE PESC Conference, pp. 1535-1539, 2001.
17 R. L. Steigerwald, "A comparison of half-bridge resonant converters topologies," IEEE Trans. Power Electron., Vol. 3, No. 2, pp. 174-182, Apr. 1988.   DOI
18 J. L. Duarte, M. Hendrix and M. G. Simoes, "Three-port bidirectional converter for hybrid fuel cell systems," IEEE Trans. Power Electron., Vol. 22, No. 2, pp. 480-487, Mar. 2007.   DOI   ScienceOn
19 F. Z. Peng, H. Li, G. J. Su and J. S. Lawler, "A new ZVS bidirectional DC-DC converter for fuel cell and battery application," IEEE Trans. Power Electron., Vol. 19, No. 1, pp. 54-65, Jan. 2004.   DOI   ScienceOn
20 I. Baibi and R. Gules, "Isolated dc-dc converters with high-output voltage for TWTA telecommunication satellite applications," IEEE Trans. Power Electron., Vol. 18, No. 3, pp. 975-984, Jul. 2003.   DOI   ScienceOn
21 F. L. Luo, "Re-lift circuits: a new dc-dc step-up boost converter," IEE Proceedings - Electronics Letters, Vol. 33, No. 1, pp. 5-7, 1997.   DOI   ScienceOn
22 Q. Zhao, F. Tao, Y. Hu, and F. C. Lee, "Active-clamp dc/dc converters using magnetic switches," in Proc. of IEEE APEC Conf., pp. 946-952, 2001.
23 A. Reatti, "Low-cost high power-density electronic ballast for automotive HID lamp," IEEE Trans. Power Electron., Vol. 15, No. 2, pp. 361-368, Mar. 2000.   DOI   ScienceOn