• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.168-176
• /
• 2006

Nowadays, Three dimensional printing (3DP) technique that is one of solid freeform fabrication (SFF) technology has been notable issue, and has been applied by various fields. The SFF system can fabricate three dimensional objects of solid freeform with high speed and low cost using ink jet printing technology. In this research, a SFF system to analyze 3DP process technology is developed. We applied sliding mode control with sliding perturbation observer (SMCSPO) algorithm and minimized position error to the developed SFF system. We analyzed and optimized process variables such as jetted volume, layer thickness, powder bed and so on experimentally. Also. the dimensional error of a developed SFF system is evaluated. Finally, the feasibility of application to bio manufacturing is presented through successful fabrication of teeth and cranium model.

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.245-249
• /
• 2011

Carbon nanotubes (CNTs) have been significantly used for the field emitters for display applications. However, the lifetime of CNT emitters which are formed by screen printing technique is not guaranteed yet, because the constituents in CNT paste affect the lifetime of CNTs. The CNT pastes for screen printing are normally composed of organic vehicles (nitro cellulose, ethyl cellulose, etc) and additives (glass frits, indium tin oxide (ITO), etc) with CNTs. In this study, the effects of constituents in CNT pastes on the lifetime and emission characteristics of CNTs were investigated by thermal and electrical analysis. Use of glass frits worsened the lifetime and electron emission of CNTs. However, an addition of ITO to CNT paste rather improved the lifetime of CNTs. Degradation of CNTs was small when nitro cellulose was used in CNT paste as an organic vehicle.

• 한국결정성장학회지
• /
• 제27권5호
• /
• pp.256-262
• /
• 2017

$1000^{\circ}C$ 이상의 고온에서도 안정적인 발색 특성을 보이는 세라믹 잉크를 활용한 디지털 프린팅 기술은 우수한 내구성을 가지는 제품을 다양한 디자인을 적용하여 생산할 수 있는 친환경 공정이라는 장점으로 인해 최근 관심이 높아지고 있다. 특히 건축용 세라믹 타일 산업에서 잉크젯 프린팅 기술 도입을 통한 디지털 공정으로의 전환은 점점 가속화되고 있으며, 이와 관련된 프린팅 시스템 및 고온발색 세라믹 잉크에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 세라믹 타일의 표면 유약층에서 고온발색 세라믹 잉크의 인쇄적성을 분석하였다. 디지털 4원색인 Cyan, Magenta, Yellow, Black 색상의 고온발색 세라믹 잉크가 프린팅된 세라믹 타일의 표면 및 단면의 미세구조를 분석함으로써 세라믹 잉크의 종류에 따른 인쇄특성에 대해 비교하였다. 또한 고온 열처리 공정이 필수적으로 요구되는 세라믹 소재의 특성상 잉크젯 프린팅 후 세라믹 잉크 패턴의 열처리 공정에 따른 거동변화에 관하여 고찰하였으며, 세라믹 타일 유약층에서 세라믹 잉크의 인쇄적성은 미세구조 및 고온 소성 과정에 큰 영향을 받고 있음을 확인하였다.

• 한국정보통신학회논문지
• /
• 제22권7호
• /
• pp.1001-1008
• /
• 2018

본 논문은 인명구조, 사고방지, 시설관리 등 수상환경에서 위치정보가 필요한 상황에서 무선 신호를 활용한 효율적인 위치 추적 기술을 제안한다. 제안하는 기법은 유저의 배터리 파워 소모량을 고려하여 제한된 전력 내에서 위험도를 최소화한다. 수상의 일정 반경 내에서 유저의 송수신 신호 세기를 이용하여 유저의 위치를 알 수 있는데, 이 때 유저가 일정 반경을 벗어나는 것을 사전에 방지할 필요가 있다. 이 논문에서는 먼저 유저가 일정 반경을 벗어나는 것을 방지하기 위해 위험도 함수를 정의한다. 위험도 함수는 위치정확도, 수심, 유속 등 수상 환경 위험에 관련된 다양한 요인들을 고려한다. 본 논문은 finger printing 기법을 이용한 효율적인 무선 측위 기술을 활용하여 일정 지역 내에 위치한 유저의 평균 위험도를 최소화하는 것을 목표로 하고 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권1호
• /
• pp.64-72
• /
• 2007

팔만대장경판을 보관하고 있는 장경판전 내부의 판가 기둥에 대하여 생물적 열화 특성을 조사 연구하였다. 장경판전의 법보전과 수다라장의 판가기둥을 대상으로 연구 검토한 결과, 서가의 위치 및 부위 그리고 주변 환경에 따라 다양한 열화 현상이 있음이 밝혀졌다. 부재의 주요 열화는 미생물에 의한 부후현상으로 밝혀졌으나, 부후가 나타난 부분들은 초석에 접촉된 부위였으며 부후 정도가 매우 극심한 상태를 보였다. 법보전 판가기둥 부후가 더 심했다. 부후형은 백색부후형이 많았다. 그리고 일부판가기둥에서는 곰팡이류의 표면오염이 극심한 것으로 나타났다. 특히 동북, 서북, 북향에 위치한 부재에 더 심한 열화가 나타났으며 건물내부의 전면보다는 후면에 위치한 판가 부재의 부후가 심한 것으로 밝혀졌다 해충에 의한 피해는 거의 없었다.

• 한국재료학회지
• /
• 제29권1호
• /
• pp.23-29
• /
• 2019

Three-dimensional(3D) printing is a process for producing complex-shaped 3D objects by repeatedly stacking thin layers according to digital information designed in 3D structures. 3D printing can be classified based on the method and material of additive manufacturing process. Among the various 3D printing methods, digital light processing is an additive manufacturing technique which can fabricate complex 3D structures with high accuracy. Recently, there have been many efforts to use ceramic material for an additive manufacturing process. Generally, ceramic material shows low processability due to its high hardness and strength. The introduction of additive manufacturing techniques into the fabrication of ceramics will improve the low processability and enable the fabrication of complex shapes and parts. In this study, we synthesize silica composite material that can be applied to digital light processing. The rheological and photopolymeric properties of the synthesized silica composite are investigated in detail. 3D objects are also successfully produced using the silica composite and digital light processing.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1549-1559
• /
• 2022

As an accident tolerant fuel (ATF) concept, oxide dispersion strengthened Zircaloy-4 (ODS Zry-4) cladding has been developed to enhance the mechanical properties of cladding using laser processing technology. In this study, a simulation technique was established to investigate the mechanical properties and effects of Y₂O₃ particles for the ODS Zry-4. A 3D representative volume element (RVE) model was developed considering the parameters of the size, shape, distribution and volume fraction (VF) of the Y₂O₃ particles. From the 3D RVE model, the Young's modulus, coefficient of thermal expansion (CTE) and creep strain rate of the ODS Zry-4 were effectively calculated. It was observed that the VF of Y₂O₃ particles had a significant effect on the aforementioned mechanical properties. In addition, the predicted properties of ODS Zry-4 were applied to a simulation model to investigate cladding deformation under a transient condition. The ODS Zry-4 cladding showed better performance, such as a delay in large deformation compared to Zry-4 cladding, which was also found experimentally. Accordingly, it is expected that the simulation approach developed here can be efficiently employed to predict more properties and to provide useful information with which to improve ODS Zry-4.

• 한국의상디자인학회지
• /
• 제18권2호
• /
• pp.221-236
• /
• 2016

The purpose of this study is to make a contribution to the development of creative fashion culture through the expansion of creative fields in the fashion design area and also the combination of fashion and art techniques, by classifying the cases of Trompe $L{\oe}il$ expressed in modern fashion, and also analyzing its aesthetic characteristics. Conducting the qualitative research through the literature study and the analysis of design cases, it targeted the women's wear collections of Paris, Milan, London, and New York, limiting its range from S/S 2010 to F/W 2015. The results are as follows: First, based on the preceding research, the types of Trompe $L{\oe}il$ expressed in modern fashion were shown as realistic expression of clothing, movement of daily objects, double images, and application of human body. Second, the aesthetic characteristics of Trompe $L{\oe}il$ based on its expression types were deconstruction, avant-garde, and amusements. The deconstruction was expressed in the expression type of Trompe $L{\oe}il$ such as freedom of materials using digital printing technique, change in the position of clothes, and movement of daily items using collage technique by collecting objets like daily items or waste. The avant-garde was expressed by switching/overlapping in and out of clothes, intentionally exposing some body parts like breast or torso, displacing body parts, and moving daily items. The amusements was shown by realistically expressing accessories or details of clothes using digital printing technique, or moving daily items such as book and fork.

• 한국의류학회지
• /
• 제31권8호
• /
• pp.1252-1261
• /
• 2007

The purpose of this study was to grasp the utilization of traditional Korean Patterns used for fashion cultural products. To achieve this purpose, this study examined the range of fashion cultural products through literature review, previous researches, and market surveys and analyzed the situation of fashion cultural products and the kinds, expression methods, expression techniques, and repeat styles of utilized patterns. The analysis results are as follows. First, in the use of traditional pattern, the most frequently-used fashion cultural products were small and inexpensive accessories, followed by fashion apparel, miscellaneous goods, and living cultural goods. Second, the most frequently-used traditional patterns were plant patterns, especially flower patterns. The next frequently-used ones were mixed patterns, especially in the mixture of flower and letter patterns, and $cloisonn\'{e}$ and flower patterns. The next frequently-used traditional patterns were animal patterns(especially butterfly patterns), followed by geometric patterns, lucky omen patterns, and letter patterns. In the expression methods of used patterns, most products except handicrafts preferred simplified patterns to real patterns. Finally, in the expression techniques of traditional patterns, the most frequently used technique was traditional embroidery, followed by the use of weaving fabrics such as fine gauze and brocade which are used for Hanbok. Also, transfer dyeing which is one of printing techniques, DTP(digital textiles printing), a mixed technique which adds embroidery to weaving fabrics, hand-painting, and a gilt technique were used. The results of this study suggest that most fashion cultural products except few designers' works attached weight to some specified patterns and expression techniques regardless of the characteristics of products since there is little understanding of a variety of patterns and are few researches and development on expression techniques.

• 대한치과보철학회지
• /
• 제57권3호
• /
• pp.288-295
• /
• 2019

임플란트 지지 보철물의 'passive fit'은 보철물의 장기적인 성공과 합병증의 최소화에 핵심적인 요소이다. 그리고 이 요소는 보철물의 제작과정에 의해 대부분 결정된다. 전통적인 주조 방식은 금속의 수축 변형이 발생하여 광범위한 임플란트 보철물에 적용하는데 제한이 있었다. 그러나 Computer-aided design/Computer-aided manufacture (CAD/CAM) 밀링 방식과 3D 프린팅 방식을 사용하면 이러한 한계점을 극복할 수 있다. 본 증례는 광범위한 임플란트 보철물을 사용한 완전 구강 회복 증례이다. 가철성 임시 보철물을 제작하여 심미와 기증을 평가하고 임플란트 식립을 위한 가이드로 사용하였다. 임플란트 식립 후, 임플란트 고정성 임시 보철물이 장착되었다. 추가적인 평가와 조정 후, 최종 보철물이 CAD를 사용하여 설계되었고, CAM을 사용하여 제작되었다. 전치부 임플란트의 나사 유지형 상부구조물은 밀링되어 제작되었고, 전치부 및 구치부 금속도재관의 금속구조물은 3D 프린팅되어 제작되었다. 보철물은 양호한 적합도를 보였고 술자와 환자 모두 증례의 최종 결과에 심미적, 기능적으로 만족하였다.