Study of the mechanical properties and effects of particles for oxide dispersion strengthened Zircaloy-4 via a 3D representative volume element model |
Kim, Dong-Hyun
(Advanced 3D Printing Technology Development Division, Korea Atomic Energy Research Institute)
Hong, Jong-Dae (Advanced 3D Printing Technology Development Division, Korea Atomic Energy Research Institute) Kim, Hyochan (Advanced 3D Printing Technology Development Division, Korea Atomic Energy Research Institute) Kim, Jaeyong (Advanced 3D Printing Technology Development Division, Korea Atomic Energy Research Institute) Kim, Hak-Sung (Department of Mechanical Engineering, Hanyang University) |
1 | H.-G. Kim, I.-H. Kim, Y.-I. Jung, D.-J. Park, J.-H. Park, J.-H. Yang, Y.-H. Koo, Progress of surface modified Zr cladding development for ATF at KAERI, in: Proceedings of the 2017 Water Reactor Fuel Performance Meeting, Ramada Plaza Jeju, Jeju Island, Korea, 2017, pp. 10-14. |
2 | K.A. Terrani, S.J. Zinkle, L.L. Snead, Advanced oxidation-resistant iron-based alloys for LWR fuel cladding, J. Nucl. Mater. 448 (1-3) (2014) 420-435. DOI |
3 | K. Yueh, K.A. Terrani, Silicon carbide composite for light water reactor fuel assembly applications, J. Nucl. Mater. 448 (1-3) (2014) 380-388. DOI |
4 | H.J. Bohm, A. Rasool, Effects of particle shape on the thermoelastoplastic behavior of particle reinforced composites, Int. J. Solid Struct. 87 (2016) 90-101. DOI |
5 | N. Chawla, R. Sidhu, V. Ganesh, Three-dimensional visualization and microstructure-based modeling of deformation in particle-reinforced composites, Acta Mater. 54 (6) (2006) 1541-1548. DOI |
6 | Y.-I. Jung, H.-G. Kim, I.-H. Kim, S.-H. Kim, J.-H. Park, D.-J. Park, J.-H. Yang, Y.-H. Koo, Strengthening of Zircaloy-4 using Y2O3 particles by a laser-beam-induced surface treatment process, Mater. Des. 116 (2017) 325-330. DOI |
7 | D.M. Perez, R. Williamson, S. Novascone, G. Pastore, J. Hales, B. Spencer, Assessment of BISON: A Nuclear Fuel Performance Analysis Code, Idaho National Laboratory, Idaho Falls, 2013. |
8 | H. Kim, S. Lee, J. Kim, J. Yoon, Development of MERCURY for simulation of multidimensional fuel behavior for LOCA condition, Nucl. Eng. Des. 369 (2020) 110853. DOI |
9 | A.R. Massih, An Evaluation of High-Temperature Creep of Zirconium Alloys: Data versus Models, 2014. |
10 | T. Glantz, T. Taurines, O. De Luze, S. Belon, G. Guillard, F. Jacq, DRACCAR: a multi-physics code for computational analysis of multi-rod ballooning, cool-ability and fuel relocation during LOCA transients Part one: general modeling description, Nucl. Eng. Des. 339 (2018) 269-285. DOI |
11 | C. Curtis, Properties of yttrium oxide ceramics, J. Am. Ceram. Soc. 40 (8) (1957) 274-278. DOI |
12 | N. Chawla, Y.L. Shen, Mechanical behavior of particle reinforced metal matrix composites, Adv. Eng. Mater. 3 (6) (2001) 357-370. DOI |
13 | M. Barmouz, P. Asadi, M.B. Givi, M. Taherishargh, Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: effect of SiC particles' size and volume fraction, Mater. Sci. Eng., A 528 (3) (2011) 1740-1749. DOI |
14 | H. Wang, H. Zhou, R. Peng, L. Mishnaevsky Jr., Nanoreinforced polymer composites: 3D FEM modeling with effective interface concept, Compos. Sci. Technol. 71 (7) (2011) 980-988. DOI |
15 | H.-G. Kim, I.-H. Kim, Y.-I. Jung, D.-J. Park, J.-H. Park, J.-H. Yang, Y.-H. Koo, Microstructure and mechanical characteristics of surface oxide dispersion-strengthened Zircaloy-4 cladding tube, Additive Manufacturing 22 (2018) 75-85. DOI |
16 | K. Geelhood, W. Luscher, C. Beyer, FRAPCON-4.0: Integral Assessment, 2, Pacific Northwest National Laboratory, 2015. |
17 | D. Kaddour, S. Frechinet, A. Gourgues, J.-C. Brachet, L. Portier, A. Pineau, Experimental determination of creep properties of zirconium alloys together with phase transformation, Scripta Mater. 51 (6) (2004) 515-519. DOI |
18 | R.L. Williamson, G. Pastore, S.R. Novascone, B.W. Spencer, J.D. Hales, Modelling of LOCA Tests with the BISON Fuel Performance Code, Idaho National Lab.(INL), Idaho Falls, ID (United States), 2016. |
19 | D. Campello, N. Tardif, M. Moula, M.-C. Baietto, M. Coret, J. Desquines, Identification of the steady-state creep behavior of Zircaloy-4 claddings under simulated Loss-Of-Coolant Accident conditions based on a coupled experimental/numerical approach, Int. J. Solid Struct. 115 (2017) 190-199. DOI |
20 | D.-H. Kim, J.-D. Hong, H. Kim, J. Kim, H.-S. Kim, H. Guim, Measurement and investigation of mechanical properties of a partial oxide dispersion strengthened Zircaloy-4 tube via an instrumented indentation test, Materials Today Communications 27 (2021) 102210. DOI |
21 | R.G. Munro, Elastic Moduli Data for Polycrystalline Oxide Ceramics, 2002. |
22 | Y.-I. Jung, D.-J. Park, J.-H. Park, H.-G. Kim, J.-H. Yang, Y.-H. Koo, Effect of a surface oxide-dispersion-strengthened layer on mechanical strength of zircaloy-4 tubes, Nucl. Eng.Technol. 50 (2) (2018) 218-222. DOI |
23 | H.-G. Kim, I.-H. Kim, Y.-I. Jung, D.-J. Park, J.-Y. Park, Y.-H. Koo, Microstructure and mechanical strength of surface ODS treated Zircaloy-4 sheet using laser beam scanning, Nucl. Eng.Technol. 46 (4) (2014) 521-528. DOI |
24 | Z. Wang, M. Song, C. Sun, D. Xiao, Y. He, Effect of extrusion and particle volume fraction on the mechanical properties of SiC reinforced Al-Cu alloy composites, Mater. Sci. Eng., A 527 (24-25) (2010) 6537-6542. DOI |
25 | D. Barbera, H. Chen, Y. Liu, Creep-fatigue behaviour of aluminum alloy-based metal matrix composite, Int. J. Pres. Ves. Pip. 139 (2016) 159-172. DOI |
26 | G. Abaqus, Abaqus 6.11, Dassault Systemes Simulia Corporation, Providence, RI, USA, 2011. |
27 | J. Kim, J.W. Yoon, H. Kim, S.-U. Lee, Prediction of Ballooning and Burst for Nuclear Fuel Cladding with Anisotropic Creep Modeling during Loss of Coolant Accident (LOCA), Nuclear Engineering and Technology, 2021. |
28 | A.P. Mouritz, Introduction to Aerospace Materials, Elsevier2012. |
29 | J. Halpin, S. Tsai, Environmental Factors in Composite Materials Design, US Air Force Technical Report AFML TR, 1967, p. 67423. |
30 | R. Gaboriaud, High-temperature creep of yttrium sesquioxide: Y2O3, philosophical magazine. A, physics of condensed matter, Defects and Mechanical Properties 44 (3) (1981) 561-587. |
31 | D.L. Hagrman, G.A. Reymann, MATPRO-Version 11: A Handbook of Materials Properties for Use in the Analysis of Light Water Reactor Fuel Rod Behavior, Idaho National Engineering Lab., Idaho Falls (USA), 1979. |
32 | Z. Xia, Y. Zhang, F. Ellyin, A unified periodical boundary conditions for representative volume elements of composites and applications, Int. J. Solid Struct. 40 (8) (2003) 1907-1921. DOI |
33 | S. Ma, X. Zhuang, X. Wang, 3D micromechanical simulation of the mechanical behavior of an in-situ Al3Ti/A356 composite, Compos. B Eng. 176 (2019) 107115. DOI |
34 | A. Gallardo-Lopez, A. Dominguez-Rodriguez, C. Estournes, R. Marder, R. Chaim, Plastic deformation of dense nanocrystalline yttrium oxide at elevated temperatures, J. Eur. Ceram. Soc. 32 (12) (2012) 3115-3121. DOI |
35 | R. Lefever, J. Matsko, Transparent yttrium oxide ceramics, Mater. Res. Bull. 2 (9) (1967) 865-869. DOI |
36 | Y. Nigara, Measurement of the optical constants of yttrium oxide, Jpn. J. Appl. Phys. 7 (4) (1968) 404. DOI |
37 | P.S. Turner, The Problem of Thermal-Expansion Stresses in Reinforced Plastics, 1942. |
38 | D.-H. Kim, G.-H. Choi, H. Kim, C. Lee, S.-U. Lee, J.-D. Hong, H.-S. Kim, Measurement of Zircaloy-4 cladding tube deformation using a three-dimensional digital image correlation system with internal transient heating and pressurization, Nucl. Eng. Des. 363 (2020) 110662. DOI |
39 | Y. Lee, J.I. Lee, H.C. No, Mechanical analysis of surface-coated zircaloy cladding, Nucl. Eng.Technol. 49 (5) (2017) 1031-1043. DOI |
40 | B. Cheng, Y.-J. Kim, P. Chou, Improving accident tolerance of nuclear fuel with coated Mo-alloy cladding, Nucl. Eng.Technol. 48 (1) (2016) 16-25. DOI |
![]() |