• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.168-176
• /
• 2006

Nowadays, Three dimensional printing (3DP) technique that is one of solid freeform fabrication (SFF) technology has been notable issue, and has been applied by various fields. The SFF system can fabricate three dimensional objects of solid freeform with high speed and low cost using ink jet printing technology. In this research, a SFF system to analyze 3DP process technology is developed. We applied sliding mode control with sliding perturbation observer (SMCSPO) algorithm and minimized position error to the developed SFF system. We analyzed and optimized process variables such as jetted volume, layer thickness, powder bed and so on experimentally. Also. the dimensional error of a developed SFF system is evaluated. Finally, the feasibility of application to bio manufacturing is presented through successful fabrication of teeth and cranium model.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.245-249
• /
• 2011

Carbon nanotubes (CNTs) have been significantly used for the field emitters for display applications. However, the lifetime of CNT emitters which are formed by screen printing technique is not guaranteed yet, because the constituents in CNT paste affect the lifetime of CNTs. The CNT pastes for screen printing are normally composed of organic vehicles (nitro cellulose, ethyl cellulose, etc) and additives (glass frits, indium tin oxide (ITO), etc) with CNTs. In this study, the effects of constituents in CNT pastes on the lifetime and emission characteristics of CNTs were investigated by thermal and electrical analysis. Use of glass frits worsened the lifetime and electron emission of CNTs. However, an addition of ITO to CNT paste rather improved the lifetime of CNTs. Degradation of CNTs was small when nitro cellulose was used in CNT paste as an organic vehicle.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.5
• /
• pp.256-262
• /
• 2017

Digital ink-jet printing technology using ceramic ink, which is thermally stable at high temperature above $1000^{\circ}C$, has an advantage of eco-friendly process applicable to manufacturing products with an excellent durability and various designs. Recently, replacement from conventional manufacturing process to digital process using ink-jet printing technique has been significantly accelerated in ceramic tile industry. In this study, we investigated ink-jet printability of ceramic ink on ceramic tile. Cyan, magenta, yellow, black ceramic inks, which are digital primary color of ink-jet printing, were printed on glazed surface of ceramic tiles, and their printabilities were comparatively analyzed. High temperature sintering process is generally required for manufacturing ceramic products, thus effect of sintering process on printed pattern of ceramic ink was also investigated by analyzing ink penetration depth and ink dot area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.7
• /
• pp.1001-1008
• /
• 2018

In this paper, we propose an efficient location tracking scheme using wireless signals for various situations in marine environment that requires location information for many reasons such as lifesaving, accident prevention, and facility management. Our proposed location tracking scheme not only monitors user's location, but also minimizes the risk under the user's limited battery power budget. The position of a user can be obtained at base stations from the strengths of the received signals from the user. In this case, it may require to prevent the user from getting out of the predetermined safe area. For each location in the safe area, we define a risk function, which is influenced by many factors such as location accuracy, depth, flow rate, and geometry. Our proposed scheme is based on finger printing technique and aims at minimizing the average risk of each user in the safe area.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.64-72
• /
• 2007

The biodeterioration behaviors of square post to support the wooden printing blocks Shelves in the Janggeongpanjeon were investigated according to the positions and parts of square post, and environmental conditions. It was found that a high differences of deterioration in the progressing levels of wood decay, according to the positions and parts of square post, and environmental conditions. The decay levels were very high and still progressing in the contacted areas with stone foundation which are about up to 50 cm above it. In the decay type, white rot fungi was mainly affected in the inside of building which mainly made of softwood. The decay in the square posts to support the wooden printing block shelves inside of building was worse in the rear side, compared to front side. The insects was not found in most of square posts excluding the post which was neighboring at the infected round column by insect.

• Korean Journal of Materials Research
• /
• v.29 no.1
• /
• pp.23-29
• /
• 2019

Three-dimensional(3D) printing is a process for producing complex-shaped 3D objects by repeatedly stacking thin layers according to digital information designed in 3D structures. 3D printing can be classified based on the method and material of additive manufacturing process. Among the various 3D printing methods, digital light processing is an additive manufacturing technique which can fabricate complex 3D structures with high accuracy. Recently, there have been many efforts to use ceramic material for an additive manufacturing process. Generally, ceramic material shows low processability due to its high hardness and strength. The introduction of additive manufacturing techniques into the fabrication of ceramics will improve the low processability and enable the fabrication of complex shapes and parts. In this study, we synthesize silica composite material that can be applied to digital light processing. The rheological and photopolymeric properties of the synthesized silica composite are investigated in detail. 3D objects are also successfully produced using the silica composite and digital light processing.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1549-1559
• /
• 2022

As an accident tolerant fuel (ATF) concept, oxide dispersion strengthened Zircaloy-4 (ODS Zry-4) cladding has been developed to enhance the mechanical properties of cladding using laser processing technology. In this study, a simulation technique was established to investigate the mechanical properties and effects of Y₂O₃ particles for the ODS Zry-4. A 3D representative volume element (RVE) model was developed considering the parameters of the size, shape, distribution and volume fraction (VF) of the Y₂O₃ particles. From the 3D RVE model, the Young's modulus, coefficient of thermal expansion (CTE) and creep strain rate of the ODS Zry-4 were effectively calculated. It was observed that the VF of Y₂O₃ particles had a significant effect on the aforementioned mechanical properties. In addition, the predicted properties of ODS Zry-4 were applied to a simulation model to investigate cladding deformation under a transient condition. The ODS Zry-4 cladding showed better performance, such as a delay in large deformation compared to Zry-4 cladding, which was also found experimentally. Accordingly, it is expected that the simulation approach developed here can be efficiently employed to predict more properties and to provide useful information with which to improve ODS Zry-4.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.2
• /
• pp.221-236
• /
• 2016

The purpose of this study is to make a contribution to the development of creative fashion culture through the expansion of creative fields in the fashion design area and also the combination of fashion and art techniques, by classifying the cases of Trompe $L{\oe}il$ expressed in modern fashion, and also analyzing its aesthetic characteristics. Conducting the qualitative research through the literature study and the analysis of design cases, it targeted the women's wear collections of Paris, Milan, London, and New York, limiting its range from S/S 2010 to F/W 2015. The results are as follows: First, based on the preceding research, the types of Trompe $L{\oe}il$ expressed in modern fashion were shown as realistic expression of clothing, movement of daily objects, double images, and application of human body. Second, the aesthetic characteristics of Trompe $L{\oe}il$ based on its expression types were deconstruction, avant-garde, and amusements. The deconstruction was expressed in the expression type of Trompe $L{\oe}il$ such as freedom of materials using digital printing technique, change in the position of clothes, and movement of daily items using collage technique by collecting objets like daily items or waste. The avant-garde was expressed by switching/overlapping in and out of clothes, intentionally exposing some body parts like breast or torso, displacing body parts, and moving daily items. The amusements was shown by realistically expressing accessories or details of clothes using digital printing technique, or moving daily items such as book and fork.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1252-1261
• /
• 2007

The purpose of this study was to grasp the utilization of traditional Korean Patterns used for fashion cultural products. To achieve this purpose, this study examined the range of fashion cultural products through literature review, previous researches, and market surveys and analyzed the situation of fashion cultural products and the kinds, expression methods, expression techniques, and repeat styles of utilized patterns. The analysis results are as follows. First, in the use of traditional pattern, the most frequently-used fashion cultural products were small and inexpensive accessories, followed by fashion apparel, miscellaneous goods, and living cultural goods. Second, the most frequently-used traditional patterns were plant patterns, especially flower patterns. The next frequently-used ones were mixed patterns, especially in the mixture of flower and letter patterns, and $cloisonn\'{e}$ and flower patterns. The next frequently-used traditional patterns were animal patterns(especially butterfly patterns), followed by geometric patterns, lucky omen patterns, and letter patterns. In the expression methods of used patterns, most products except handicrafts preferred simplified patterns to real patterns. Finally, in the expression techniques of traditional patterns, the most frequently used technique was traditional embroidery, followed by the use of weaving fabrics such as fine gauze and brocade which are used for Hanbok. Also, transfer dyeing which is one of printing techniques, DTP(digital textiles printing), a mixed technique which adds embroidery to weaving fabrics, hand-painting, and a gilt technique were used. The results of this study suggest that most fashion cultural products except few designers' works attached weight to some specified patterns and expression techniques regardless of the characteristics of products since there is little understanding of a variety of patterns and are few researches and development on expression techniques.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.288-295
• /
• 2019

Passive fit of prosthesis is an essential property of implant supported prosthesis for long term success and minimization of complications. And the property is determined mostly by fabrication procedure. There were limitations of extensive implant prosthesis because conventional casting method generate contraction error of long span prosthesis. However, Computer-aided design/Computer-aided manufacturing (CAD/CAM) technology of 3D printing and milling metal framework can overcome those limitations. This case is a full mouth rehabilitation using extensive implant fixed prosthesis. Removable interim prosthesis was made for esthetic, functional evaluation and a guide for implant insertion. After the insertion, implant fixed interim prosthesis was delivered. After additional evaluation and adjustment, final prosthesis was designed with CAD, the fabricated with CAM. Milling technique was used for anterior screw type implant superstructure and 3D printing technique was used for the anterior and posterior implant copings. Fit of the final restoration was favorable. The practitioner and patient were both esthetically and functionally satisfied with the final result.