• International Journal of Railway
• /
• 제1권3호
• /
• pp.89-93
• /
• 2008

Reliability of onboard power supply systems on rolling stock is a very important issue for the railway operator. While a failure of the HVAC supply results in a loss of comfort for the passengers, a failure of the supply for air compressors or for the traction cooling systems results in towing the train. This is, looking at the required availability of a train, not acceptable. An active redundancy concept for the onboard power supply maximizes the availability of the system. This paper describes such a system under the aspect of $\cdot$ Weight reduction $\cdot$ Continuous operation when changing from normal to redundant operation $\cdot$ Flexibility in train design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1222-1223
• /
• 2007

This paper suggests a 6-pulse-shift converter with PWM current-source inverter based on buck-boost configuration to improve the efficiency and to reduce the switching frequency of inverter for photovoltaic generation system, the device can be operated as interface system between solar module system and power system grid without energy storage cell. the circuit has six current-source buck-boost converter which operate chopper part has one full bridge inverter which make a decision the polarity of AC output. Therefore, the proposed PWM power inverter has advantages such as the reduction of witching loss and realization of unity power factor operation. the theoretical backgrounds are discussed and the input-output characteristics for the implemented prototype inverter using TMS320F2812 are verified experimentally in this paper.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.569-572
• /
• 2000

This paper presents the optimized fabrication and thermal characteristics of micro-heaters for thermal MEMS applications using a SDB SOI substrate. The micro-heater is based on a thermal measurement principle and contains for thermal isolation regions a 10$\mu\textrm{m}$ thick silicon membrane with oxide-filled trenches in the SOI membrane rim. The micro-heater was fabricated with Pt-RTD(Resistance Thermometer Device)on the same substrate by using MgO as medium layer. The thermal characteristics of the micro-heater with the SOI membrane is 280$^{\circ}C$ at input Power 0.9 W; for the SOI membrane with 10 trenches, it is 580$^{\circ}C$ due to reduction of the external thermal loss. Therefore, the micro-heater with trenches in SOI membrane rim provides a powerful and versatile alternative technology for improving the performance of micro thermal sensors and actuators.

• International Journal of Advanced Culture Technology
• /
• 제9권3호
• /
• pp.283-290
• /
• 2021

Recently, correlated superposition coding (CSC) has been proposed to implement non-orthogonal multiple access (NOMA) without successive interference cancellation (SIC), without loss of spectral efficiency, in contrast to conventional independent superposition coding (ISC). However, correlation between signals has reduced the average total allocated power, which results in degraded performance. Thus, in order to avoid the reduction of the average total allocated power owing to correlation between signals, this paper proposes a cross-correlated quadrature amplitude modulation (QAM) NOMA scheme under Rayleigh fading channel surroundings. First, we design the cross-correlated QAM NOMA scheme. Then, simulations demonstrate that for the weaker channel gain's user, the symbol error rate (SER) performance of the proposed cross-correlated QAM NOMA improves largely, whereas for the stronger channel gain's user, the SER performance of the proposed cross-correlated QAM CSM NOMA degrades little, compared to that of the conventional QAM NOMA.

• 대한전자공학회논문지SD
• /
• 제45권6호
• /
• pp.43-48
• /
• 2008

일반적으로 자체 테스트 동작은 입력 벡터들 사이에 상호 연관성이 없기 때문에 더 많은 전력을 소비하는 것으로 알려져 있다. 이러한 점은 회로에 손상을 유발할 뿐 아니라 배터리 수명에도 악영향을 미치기 때문에 반드시 해결되어야 할 과제 중 하나이다. 이를 위해 본 논문에서는 새로운 방식의 BIST(Built-In Self Test) 구조를 제안하여 테스트 동작에서의 천이를 감소시키고, 이를 통해 전력소모를 줄이고자 한다. 제안하는 구조에서는 LFSR(Linear Feedback Shift Register)을 통해 생성되는 pseudo-random 테스트 벡터가 스캔 경로로 들어가기 전에 3 bit씩 모아 더 적은 천이를 가지는 4 bit의 패턴으로 변형한다. 이러한 변형과 그에 대한 복원 과정은 기존의 스캔 BIST 구조에서 Bit Generator와 Bit Dropper라는 모듈을 추가하여 간단히 구현하였다. 제안하는 구조를 ISCAS'89 benchmark 회로에 적용한 결과 약 62%의 천이 감소를 확인하였고 이를 통해 제안하는 구조의 효율성을 검증하였다.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1712-1718
• /
• 2013

This paper proposes a compact dual-band 3-way power divider that helps lowering the weight of a transceiver for the L-band or multi-purpose satellite communication. Instead of the multi stages or tapering which ends up with loss accumulation and size-growth, the non-linear dispersive phases from the metamaterial CRLH(composite right and left-handed) properties are obtained by the accurate formulation and implemented by the short transmission line segments. Firstly, the CRLH dual-band two-way unequal power divider and equal power divider are separately designed. And then, the input of the two-way equal power divider is plugged in the output port of the unequal one, and the entire geometry is slightly adjusted for the desirable performance. The circuit analysis and full-wave simulation are used to predict the frequency responses and validated by the measurement of the prototype. Besides, the size-reduction effect is addressed.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.465-471
• /
• 2014

This paper proposes a new switching algorithm for an active clamp snubber to improve the efficiency of a module integrated converter system. This system uses an active clamp method for the snubber circuit for the efficiency and reliability of the system. However, the active clamp snubber circuit has the disadvantage that system efficiency is decreased by switch operating time because of heat loss in resonance between the snubber capacitor and leakage inductance. To address this, this paper proposes a new switching algorithm. The proposed algorithm is a technique to reduce power consumption by reducing the resonance of the snubber switch operation time. Also, the snubber switch is operated at zero voltage switching by turning on the snubber switch before main switch turn-off. Simulation and experimental results are presented to show the validity of the proposed new active clamp control algorithm.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.38-43
• /
• 2011

Industrial reducer is in general use to Deck Crane. High-precision and high-efficient reducer is minimized the power-loss and energy-loss of a machine. So it contribute the price reduction and life extension. Reducer is usually using the Planetary gear reducer. Planetary gear reducer is composed the sun gear, planet gear, internal gear and casing. Industrial reducer's wear and breakage have a short-life. To solve this problem, it is using the profile-shifted-gear or tooth modification. This study was carried out the effect of addendum modification coefficient on tooth fillet bending strength to planetary reducer. Tooth fillet bending stress is calculate. And all parameter were expressed the function of addendum modification coefficient. And then stress concentration factor of tooth fillet curve was express the function of addendum modification coefficient using comparison between theory and finite element analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.142-146
• /
• 2000

This paper Presents a heuristic algorithm based on branch exchange method to solve ORP (Optimal Routing Problem) for distribution system planning. The ORP is a complex task which is generally formulated as a combinatorial optimization problem with various constraints. The cost function of ORP is consisted of the investment cost and the system operation cost that is generally expressed with system power loss. This paper also adopt an specialy designed selection method of maximum loss reduction loop and branch to reduce optimization time. The effectiveness of the proposed algorithm was shown with 32, 69 bus example system.

• 한국소음진동공학회논문집
• /
• 제14권2호
• /
• pp.87-94
• /
• 2004

In this paper, the experimental design of an intake system was studied using the two microphones method and the taguchi method. The transmission loss was utilized to represent the performance of noise reduction for the intake system which was estimated by measuring sound power at inlet and outlet with two microphones, respectively. Two microphones method used in this paper was followed by wave decomposition theory. The robust designing parameters of an intake system were extracted by adapting a cost function with the taguchi method, which optimized the process. Finally the effectiveness of the propose method was validated with the experimental data.