• 제목/요약/키워드: Power Facility

검색결과 1,280건 처리시간 0.025초

Propagation Characteristics of GIS PD Signals by Dual UHF Band Method (2)

  • 최재구;이상화;김광화
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
    • /
    • pp.136-139
    • /
    • 2004
  • It is widely known that the ultra high frequency (UHF) method that detects the electromagnetic wave of the PD pulses in the gas insulated space is one of the most competitive methods for its high sensitivity. From the above point of view, this paper describes the propagation characteristics of GIS PD signals measured with ultra wide band (UWB) GIS PD detecting system in which PD signals are detected into the dual UHF band. The UWB PD detection system consists of the UWB UHF coupler, the UWB low noise amplifier (LNA) and the oscilloscope. The dual bands for PD signals are 0.5-2GHz(full band) and 1-2GHz(high band). As results, propagation characteristics of GIS PD signals were measured in the mock-up GIS bus and it was found that the propagation characteristics of the high band showed a better result in accordance with the infernal configuration of the GIS bus than those of the full band.

  • PDF

전력설비의 제어 응답특성 개선을 위한 퍼지 추론 기법의 적응조정 (Improvement of Control Response Characteristics for Power Facility using the Adaptive Sizing of Fuzzy Inference Method)

  • 이현재;김동은;손진근
    • 전기학회논문지
    • /
    • 제67권12호
    • /
    • pp.1699-1704
    • /
    • 2018
  • In this paper, proposed a method to improve of control characteristics for power facility using the adaptive sizing of fuzzy inference method. In the use of the controller based the fuzzy logic, a basic mamdani fuzzy controller is applied. However, when the maximum value and the minimum value have to taken, the fuzzy controller can not take a normal value because of formalized grouping form. In this paper, we combine the conventional methods with single valued sets to compensate for the disadvantage caused by the mamdani method control. Simulation results show that the proposed method has better overshoot and steady state arrival time than the conventional control method.

DSP와 라즈베리 파이를 기반으로 한 스마트 그리드 전력설비의 통신제어장치 설계 방법론 (Design Methodology of Communication & Control Device for Smart Grid Power Facility based on DSP and Raspberry Pi)

  • 오세영;이준혁;이세인;박창수;고윤석
    • 한국전자통신학회논문지
    • /
    • 제16권5호
    • /
    • pp.835-844
    • /
    • 2021
  • 본 논문에서는 스마트 그리드 전력설비 간 통신을 통해 고장구간을 자율적으로 판단, 분리하기 위한 기반기술인 통신제어장치를 설계하였다. 통신제어장치에서 제어모듈은 3상 전압, 전류를 계측할 수 있도록 DSP, 통신모듈은 전력설비 간 통신을 통해 고장구간을 판단, 고장구간 분리를 실현할 수 있도록 라즈베리 파이로 설계되었다. DSP와 라즈베리 간 통신은 SPI 통신방식을 기반으로, 반면에 라즈베리 간 통신은 Wi-Fi 기반으로 설계되었다. 끝으로, 3개의 전력설비 통신제어 장치로 구성되는 성능 평가 시스템을 구축하였으며, 선로 상의 다양한 고장 이벤트들에 대한 모의 검증을 실시하였다. 평가 결과, 모든 시험경우들에 대해서 통신제어장치가 요구된 응답을 보임으로서 통신제어장치 설계 방법론의 유효성을 확인할 수 있었다.

고에너지 음향환경시험 튜브 개발 (Development of High Intensity Progressive Wave Tube)

  • 김영기;김홍배;문상무;우성현;임종민
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 춘계학술대회논문집
    • /
    • pp.962-965
    • /
    • 2005
  • A high intensity progressive wave tube is installed at Korea Aerospace Research Institute (KARI) for acoustic environmental tests. The test facility has 700 mm x 800 mm cross-sectional area, and provides acoustic environment of 165 dB over the frequency range of $25Hz{\sim}10,000Hz$. The facility consists of a 6 m long acoustic wave tube, acoustic power generation systems, gases nitrogen supply systems, and acoustic control systems. This paper describes how the basic parameters of the facility and power generation systems are controlled to meet the requirement of the test. The shape and length of the tube has been designed by using the size of test objects and the wave propagation characteristics of the tube. The capacity of acoustic power generation systems is determined by the energy conversion of acoustic wave and the efficiency of acoustic modulators. Moreover, the paper introduces test run results of the tube. Overall of 163dB has been generated by using the test facility.

  • PDF

방사성폐기물 처분시설 주변의 방사선환경조사 (Radiological Environment Investigation of Radioactive Waste Disposal Facility)

  • 백정석;정의영;안상복;김완
    • 방사성폐기물학회지
    • /
    • 제6권4호
    • /
    • pp.387-398
    • /
    • 2008
  • 원자력이용시설 주변의 방사선환경조사는 교육과학기술부 고시 제2008-28호(원자력이용시설 주변의 방사선환경조사 및 방사선환경 영향평가에 관한 고시)에 따라 주변주민들이 받게 되는 방사선량이 연간 선량한도 이내로 충분히 적게 유지되고 있는지를 확인함으로써 주변주민의 건강과 안전을 확보하고 주변 환경의 오염을 사전에 예방하는 데 있다. 그런데 국내 최초의 방사성폐기물처분시설은 시설운영을 시작하기 전 최소 2년 동안의 기초 환경조사 자료를 취득하여 부지주변의 기준 준위를 설정해야 하므로 2007년부터 2009년 상반기 방사성폐기물처분시설의 시범운영 및 2010년 상반기 준공을 목표로 방사선과 방사능에 대한 관한 기초 환경조사 자료를 취득하고 있다. 따라서 방사성폐기물처분시설 주변의 방사선환경조사에 관한 추진내용을 분석하고 최근에 취득한 2008년도 전반기 방사선환경조사결과를 바탕으로 향후 조사계획서 개정방향과 방사성폐기물처분시설 주변의 방사선환경조사를 수행하기 위해 관련 내용을 고찰하였다.

  • PDF

지능형 전원제어장치를 이용한 자동화 유지보수 무인감시시스템 (Automated Maintenance Unmanned Monitoring System Using Intelligent Power Control System)

  • 채민욱;이충호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2021년도 춘계학술대회
    • /
    • pp.237-239
    • /
    • 2021
  • 무인 감시설비의 고장과 오작동으로 인해 담당자가 무인 감시시설에 도착할 때까지 생기는 시간 지연과 침입자의 침입으로 인한 시설물 절도, 파손 그리고 정보유출 피해가 발생할 수 있다. 또한, 장비 고장과 오작동으로 인해 관리자의 상시점검으로 인한 추가비용이 발생한다. 본 논문에서는 무인 감시설비 오작동을 보완하기 위해 실시간으로 감시설비를 진단하여 문제 발생에 관한 내용을 표시하고 자동으로 설비 전원을 복구하며 담당자에게 문자메시지로 상황을 알리는 시스템을 제안한다. 제안한 시스템은 영상장치(CCTV), 음향장비, 투광등 장치 등의 무인 감시설비 주요 시설물로 이루어진 감시설비, 이 감시설비 정보를 판단할 수 있는 통합형 네트워크 비디오 레코더 장치(NVR), 전원을 제어하는 장치, 그리고 실시간으로 문자메시지를 보낼 수 있는 SMS 서버로 구성되어있다. 실험을 통하여 제안된 시스템의 유효성을 검증하였다.

  • PDF

도시철도 변전소의 네트워크 기반 실시간 데이터 취득 시스템 구현 (Implementation of a Real-Time Data Acquisition System Based on Wireless Communication for Urban Rail Transit Substation)

  • 정호성;박영;김형철
    • 전기학회논문지P
    • /
    • 제59권1호
    • /
    • pp.71-76
    • /
    • 2010
  • This paper is focused on implementing a real-time data acquisition system that checks power facility status by applying network based technology to Urban Transit substation power facilities and the results of its on-field tests. This system is composed of a sensor part, a measurement part, a transceiver part, a host computer, and a power source part. The system is designed to collect, save, analyze, and display the online state power facility AI (Analog Input). This system measures voltage and current from positive feeders and negative feeders where it is possible to check abnormalities of the substation‘s main power facilities. By monitoring abnormal data of the Urban Transit power facilities real-time and analyzing stored data, establishing procedures of optimized maintenance is possible.

Neutronic and thermohydraulic blanket analysis for hybrid fusion-fission reactor during operation

  • Sergey V. Bedenko ;Igor O. Lutsik;Vadim V. Prikhodko ;Anton A. Matyushin ;Sergey D. Polozkov ;Vladimir M. Shmakov ;Dmitry G. Modestov ;Hector Rene Vega-Carrillo
    • Nuclear Engineering and Technology
    • /
    • 제55권7호
    • /
    • pp.2678-2686
    • /
    • 2023
  • This work demonstrates the results of full-scale numerical experiments of a hybrid thorium-containing fuel plant operating in a state close to critical due to a controlled source of D-T neutrons. The proposed facility represented a level of generated power (~10-100 MWt) in a small pilot. In this work, the simulation of the D-T neutron plasma source operation in conjunction with the facility blanket was performed. The fission of fuel nuclei and the formation of spatial-energy release were studied in this simulation, in pulsed and stationary modes of the facility operation. The optimization results of neutronic and fluid dynamics studies to level the emerging offsets of the radial energy formed in the volume of the facility multiplying part due to the pulsed operation of the D-T neutron plasma source were presented. The results will be useful in improving the power control-based subcriticality monitoring method in coupled systems of the "pulsed neutron source-subcritical fuel assembly" type.

IEC 61850 기반 디지털변전소 현장정보처리장치 시험 방법에 관한 연구 (A Study on the Test Method of Local Information Processing Device in Digital Substation Based on IEC 61850)

  • 김남대;김우중;이남호;김석곤;장병태
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제6권3호
    • /
    • pp.253-257
    • /
    • 2020
  • 현장정보처리장치는 아날로그형 전력설비의 전압, 전류, 디지털 전기신호를 IEC 61850 기반 데이터로 변환하여 정보를 처리하는 장치이다. 이는 아날로그형 전력설비의 운전 정보를 취득 및 처리하고, 전력설비의 제어를 수행하며, 내부 로직을 이용하여 인터록 기능 등을 수행한다. 특히, 다수의 보호계전기 입출력 신호를 하나의 장치에서 처리하기 때문에 장치의 입출력 정보를 처리하는 데이터 변환시간이 중요하다. 본 논문에서는 현장정보처리장치의 IEC 61850 통신 기능 및 입출력 데이터 변환시간을 측정할 수 있는 시험 방법과 사례를 소개하고자 한다.