• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.259-260
• /
• 2019

Through Korean Smart-Navigation Project we are tasking with a VDES test network construction and service solution development. In this task, we design a structure that interoperates the VDES network with the service host/client simulator which is communication framework for efficient and reliable and seamless service. The proposed structure includes interface design between VDES test equipments which is VDES shore station, mobile station, gate way, service host and client. And detailed design includes message definition, interface design, operation scenario, equipment design and implementation for VDES test network. After implementing these test equipments with proposed design, we will firstly proceed the test equipment integration and interface test indoors for VDES test network. After fully verifing the VDES test network through indoor tests, we will construct the VDES shore station and mobile station and conduct the sea area tests by 2020.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.87-93
• /
• 2002

A complex network and a parallel computer are made up of interconnected switching units. The role of a switching unit is to set up a connection between an input port and an output port, according to the routing information. We proposed our switching network with a remodeled architecture is a newly modified Banyan network with eight input and output ports. We have analysed the maximum throughput of the revised switch. Our analyses have shown that under the uniform random traffic load, the FIFO discipline is limited to 70%, The switching system consists of an input control unit, a switch unit and an output control unit. Therefore the result of the analyses shows that the results of the networking simulation with the new switch are feasible and if we adopt the new architecture of the revised model of the Banyan switch, the hardware complexity can be reduced. The FIFO discipline has increased by about 11% when we compare the switching system with the input buffer system. We have designed and verified the switching system in VHDL using Max＋plusII. We also designed our test environment including micro computers, the base station, and the proposed architecture. We proposed a new architecture of the Banyan switch for BISDN networks and parallel computers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2209-2216
• /
• 2011

In this paper, we design a 32-bit eFuse OTP memory for PMICs using MagnaChip's $0.18{\mu}m$ process. We solve a problem of an electrical shortage between an eFuse link and the VSS of a p-substrate in programming by placing an n-well under the eFuse link. Also, we propose a WL driver circuit which activates the RWL (read word-line) or WWL (write word-line) of a dual-port eFuse OTP memory cell selectively when a decoded WERP (WL enable for read or program) signal is inputted to the eFuse OTP memory directly. Furthermore, we reduce the layout area of the control circuit by removing a delay chain in the BL precharging circuit. We'can obtain an yield of 100% at a program voltage of 5.5V on 94 manufactured sample dies when measured with memory tester equipment.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2344-2346
• /
• 2002

A vacuum control system has been developed for using Ethernet Multi Serial Device Severs (EMSDS) for the Pohang Accelerator Laboratory (PAL) storage ring. There are 124 vacuum ion pumps at the storage ring. It was a very important problem to solve the problem how to control such a big number of vacuum pumps distributed around the ring. After discussions, we decided to develop a serial to ethernet interrace device sever that will be mounted in the control system rack. It has a 32-bits microprocessor embedded Linux, 12 ports RS485 (or RS232) slave interface. one channel 10/100BaseTx ethernet host port, one channel UART host port, and 16 Mbytes large memory buffer. These vacuum pumps are connected to Ion-Pump serial controllers, which chop the AC current so as to control the current in the pumps. The EMSDS connect either 100BaseTx or 10BaseT ethernet networks to asynchronous serial ports for communication with serial device. It can simultaneously control up to 12 ion-pump serial controllers. 12 EMSDS are connected to a personal computer (PC) through the network. The PC can automatically control the EMSDS by sending a set of commands through the TCP/IP network. Upon receiving a command from a PC running under Windows2000 through the network, the EMSDS communicate through the stave serial interrace ports to ion-pump controller. We added some software components on the top of EPICS (Experimental Physics and Industrial Control System) toolkit.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.241-246
• /
• 2006

The paper presents the preparations work and experiences gained from realtime GPS car monitoring during the European Rally Championships organized on 10-12 June 2005 in Poland. The developed system is based on GPS and GSM/GPRS technology. Distribution and teletransmission of data are possible using different GSM operators in Poland, which makes the system fully independent. The system's server collects data from rally cars, processing and send data through VPN connections to the SQL server located in main control room. Data can be collected in real time via Internet or GPRS. Some information on GSM/GPRS range during rally championships are also presented in the paper. The study covered many trials and tests of different software and various configurations of the GPRS modems before finally the system started to work. Information coming from 10 Rally Cars were collected to the SQL Server continuously in one second interval. In real time mode these all data were displayed simultaneously in the rally main control room and in the rally press conference room. Paper describes also adopted emergency procedures and remote reconfiguration of GPS/GPRS boxes inside rally cars made during championships. Some problems and method of practical solutions are presented to avoid active jamming dangerous for a driver and his pilot, having system of communication intercoms jammed by teletransmission of GPRS 900/1800 MHz. In cooperation with rally teams special GPS/GPRS safety boxes were designed and made. Monitoring of all 7 rally stages with GPS receivers and method of calibrations of the maps were presented. GSM signal coverage was also checked in all stages. All data transmitted from rally cars were recorded in the computer. Some of our GPS cars had accidents and dispite them information were continuously sent to server. There is possibility to show in post mission mode the position of chosen cars in our rally application. Some information of best rally cars are presented also in the paper.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.383-386
• /
• 2006

The safety of the railway system is important because the system is a mass transit system and the results of the accident are inconceivable. The railway system is operated by train operation system such as train control system. So the train control system requires safety critical characteristics. In the European railway, ETCS (European Train Control System) project has been finished to accomplish the interoperability of each national railway signaling system. According to the interoperability degree, ETCS levels are suggested. As the highest level, ETCS level 3 suggests a radio communication. Also recently urban railway system is operated by driverless and automatic train control system. In this circumstance, more safety is required than before in the railway system. In order to accomplish the safety of a system, the requirements considering safety have to be suggested. The requirement is a set of several functions such as general function, environment, safety etc. For the safety critical system, safety function is more important than any other functions. The safety functions are deduced by safety analysis. In order to perform the safety analysis, the system hazards have to be identified and then risk analysis for each hazard should be performed. The risk is related to the frequency and the severity of each hazard. And then countermeasures for each risk have to be prepared. The summary of the countermeasures is about a kind of safety functions in a system. In this paper, the safety functions for a train control system are presented according to the above procedure.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.459-464
• /
• 2006

It has been well proved that shiphandling simulators are efficient and useful facilities for training and education of cadets and seafarers. Most of the maritime universities and many maritime training institutes all over the world have installed shiphandling simulators, which play important roles in maritime education and training. However, most of the Shiphandling simulators are standalone facilities with diversities on system architectures, layouts and functions. STCW78/95 requires simulators used for simulator-based training shall be suitable for the selected objectives and training tasks. To ensure the shiphandling simulator facilities meet the requirements of STCW convention and other expanded applications, collaborated research and coordination are needed in development and application of shiphandling simulators. Performance standard should be established for shiphandling simulator systems considering the advanced research needs as well as the needs in education, training, and assessment of competence. Standardizing and exchanging shiphandling mathematical models will improve critical performance of the system. Cooperated research on model course and training assessment approaches will enhance the training standard. In addition, the rapid spread of the internet technology has shown a promising future of application of shiphandling simulators through internet. Research has been carried out on internet based integration of multiple shiphandling simulators. A multi-agent based system, including necessary hardware, has been developed. Collaborated operation of the system can be of benefit in filling the gaps of the technical and operational level and methodology between maritime universities, enhancing mutual understanding of the navigation customs and culture background among cadets and seafarers from different countries, facilitating communication and maritime English training, and extending the functions of shiphandling simulators.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.59-66
• /
• 2006

This research is based on the information compiled on the occurrence of maritime casualties onboard ships registered under Central American Region (CAR) flag States. Due to nonexistence of writing reports in anyone of the countries that are integrating this Region, the information was compiled by the author through personal communication with the people involved in the casualties. The information was compiled by typing up the text and digitizing on the computer for the respective data base. For each casualty occurred, the following information was compiled, date and type of the casualty, position of the ship at the time of the casualty, dimension of the ship, number of people affected by the casualty, and cause and consequences of the casualty. Based on the number of people affected (death and disappear) by the casualties occurred was calculated the mortality rate by 100,000 persons and then compared with the Japanese mortality rate. Furthermore were analyzed the CAR maritime authorities competences and then were compared to that the Japanese counter part. In addition, the implementation rate of the International Maritime Organization (IMO) and International Labor Organization (ILO) conventions ratified by the CAR countries were analyzed. The objective of this research was to compiled and analyze the occurrences of maritime casualties happened on board the ships registered under the CAR Flag States, in order to determine the causes of these accidents. The results of the analysis enable us to better understand of the maritime safety situation of the ships that are registered under the CAR flag States. In order to reduce the occurrence of maritime casualties are proposed a series of measures based on the differences found then the comparison between CAR and Japan. Based on the results of this research, is possible to conclude that the inaccessibility of atmospheric information and the lack of safety measures onboard has been the main cause of the maritime casualties happened in the Pacific side of the CAR.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.217-222
• /
• 2006

To find a location, GPS has been wildly used. But, it is hard to use in indoor because of very weak signal level. To meet indoor requirements, there have been many studies applying wireless communication networks such as WLAN, UWB and ZigBee. Among these, ZigBee is widely adopted in many WSN applications because it has an advantage of low-power and low-cost. In ZigBee, the RSSI is used as range measurement for ad-hoc network. The RSSI are converted to ranges using the signal attenuation model and these ranges become inputs of positioning methods. The obtained position with RSSI has large error because of its poor accuracy. To overcome this problem, ultrasonic sensors are added in many researches. By measuring the arrival time difference of ZigBee and ultrasound as a range measurement, the precise position can be found. However, there are still many problems: scheduling of beacons to transmit signals in a correct order, addition and synchronization of beacons and low-rate positioning rate. At this paper, an efficient method to solve these problems is proposed. In the proposed method, a node transmits ZigBee and ultrasound signal simultaneously. And beacons find the range with the received signals and send it back to a node with ZigBee. The position is computed in a node with the received ranges. In addition, a new positioning algorithm to solve the risk of the divergence in the linearization method and the singularity problem in the Savarese method is presented. Both static and dynamic experimental results show 0.02m RMS errors with high output rate.

• Journal of Navigation and Port Research
• /
• v.40 no.3
• /
• pp.147-157
• /
• 2016

The trend of globalization and the development of the communication-Information technology have led the organization of a complex supply chains which are more vulnerable to risks. The impact of risk on the supply chain can be adverse so importance of risk management on a supply chain has increased. In order to analyze the risk factors of transport system, this study described about the definition of transport risk and investigated the relationship between likelihood index and effect index of each risk factor. We identified risk factors on transport system and measured likelihood index and effect index of each risk factor. Finally, a numerical risk index, which is a value of total transport system, has been resulted by aggregating all indices. In addition, a case study using the proposed method has done on a heavy vehicle transport context with a transport company.