• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.248-248
• /
• 2009

Recently, the control of size, morphology and dimensionality in inorganic materials has been rapidly developed into a promising field in materials chemistry. 3D nanostructured flower-like ZnO architecture with different size and shapes have been simply synthesized via a hydrothermal process, using zinc acetate and ammonium hydroxide as reactants.[1] In this study, the Zno thin-films were deposited by RF magnetron sputtering in other to get high adhesion and uniformity of 3D nanostructured flower-like ZnO architecture on a $SiO_2$ substrate. The XRD patterns identified that the obtained the nanocrystallized ZnO architecture exhibited a wurtzite structure. SEM images illustrated that the flower-like ZnO bundles consisted of flower-like or chestnut bur, which were characterized by polycrystalline and [0001] preferential orientation.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.486-491
• /
• 2002

We have fabricated $Bi_{3.25}La_{0.75}Ti_3O_12$ (BLT) thin films on the Pt/Ti/$SiO_2$/Si substrates using a metalorganic decomposition (MOD) method with annealing temperature from $550^{\circ}C$ to $750^{\circ}C$. The structural properties of BLT films examined by x-ray diffraction (XRD). From XRD analysis. BLT thin films show polycrystalline structure. The layered-perovskite phase was obtained by spin-on films at above $600^{\circ}C$ for 1h. Scanning electron microscopy (SEM) showed uniform surface composed of rodlike grains. The grain size of BLT films increased with increasing annealing temperature. The BLT film annealed at $650^{\circ}C$ was measured to have a dielectric constant of 279, dielectric loss of 1.85(%), remanent polarization of $25.66\mu C/\textrm{cm}^2$, and coercive field of 84.75 kV/cm. The BLT thin films showed little polarization fatigue test up to $3.5{\times}10^9$ bipolar cycling at 5 V and 100 kHz.

• 한국전기전자재료학회논문지
• /
• 제19권7호
• /
• pp.680-686
• /
• 2006

Tin oxide$(SnO_2)$ thin films were prepared on glass substrate by Plasma Enhanced Chemical Vapor Deposition (PECVD) method. $SnO_2$ thin films were prepared using gas mixture of dibutyltin diacetate as a precursor and oxygen as an oxidant at 275, 325, 375, $425^{\circ}C$, respectively as a function of deposition temperature. The XRD peaks corresponded to those of polycrystalline $SnO_2$, which is in the tetragonal system with a rutil-type structure. As the deposition temperature increased, the texture plane of $SnO_2$ changed from (200) plane to denser (211) and (110) planes. Lower deposition temperature and shorter deposition time led to decreasing surface roughness and electrical resistivity of the formed thin films at $325\sim425^{\circ}C$. The properties of $SnO_2$ films were critically affected by deposition temperature and time.

• 한국세라믹학회지
• /
• 제41권9호
• /
• pp.637-641
• /
• 2004

We investigated the effects of SiH$_4$ gas on the surface of Hf-silicate films during the deposition of polycrystalline (poly) Si films and the thermal stability of sputtered Hf-silicate films in poly Si/Hf-silicate structure by using High Resolution Transmission Electron Microscopy (HR-TEM) and X-ray Photoelectron Spectroscopy (XPS). Hf-silicate films were deposited by using DC-mag-netron sputtering with Hf target and Si target and poly Si films were deposited at 600$^{\circ}C$ by using Low Pressure Chemical Vapor Deposition (LPCVD) with SiH$_4$ gas. After poly Si film deposition at 600$^{\circ}C$, Hf silicide layer was observed between poly Si and Hf-silicate films due to the reaction between active SiH$_4$ gas and Hf-silicate films. After annealing at 900$^{\circ}C$, Hf silicide, formed during the deposition of poly Si, changed to Hf-silicate and the phase separation of the silicate was not observed. In addition, the Hf-silicate films remain amorphous phase.

• 센서학회지
• /
• 제26권2호
• /
• pp.122-127
• /
• 2017

Graphene grown on copper-foil substrates by chemical vapor deposition (CVD) has been attracting interest for sensor applications due to an extraordinary high surface-to-volume ratio and capability of large-scale device fabrication. However, CVD graphene has a polycrystalline structure and a high density of grain boundaries degrading its electrical properties. Recently, processes such as electropolishing for flattening copper substrate has been applied before growth in order to increase the grain size of graphene. In this study, we systemically analyzed the effects of the process condition of electropolishing copper foil on the quality of CVD graphene. We observed that electropolishing process can reduce surface roughness of copper foil, increase the grain size of CVD graphene, and minimize the density of double-layered graphene regions. However, excessive process time can rather increase the copper foil surface roughness and degrade the quality of CVD graphene layers. This work shows that an optimized electropolishing process on copper substrates is critical to obtain high-quality and uniformity CVD graphene which is essential for practical sensor applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1416-1417
• /
• 2011

킹크효과를 억제할 수 있는 새로운 f-모양 트리플게이트 구조를 가지는 다결정실리콘 박막트랜지스터는 추가적인 공정과정 없이 제안 및 제작되었다. 이러한 다결정실리콘 박막트랜지스터의 채널에는 순차적인 횡방향 고체화(Sequential Lateral Solidification, SLS)나 CW 레이져 횡방향 결정화(CW laser Lateral Crystallization, CLC) 등과 같은 방법으로 제작된 횡방향으로 성장시킨 그레인이 있다. 이 소자의 전체적인 전류흐름은 횡방향으로 성장시킨 그레인 경계에 강력하게 영향을 받는다. f-모양 트리플게이트에는 횡방향으로 성장시킨 그레인과 평행한 방향으로 위치한 채널, 그리고 수직인 방향으로 위치한 채널이 있다. 이 소자는 f-모양 게이트 구조에서의 비대칭 이동도를 이용하여 다결정실리콘 박막트랜지스터의 킹크효과를 효과적으로 억제시킬 수 있다는 사실을 실험과 시뮬레이션을 통해 검증되었다. 우리의 실험 결과는 이 논문에서 제안된 f-모양 트리플게이트 박막트랜지스터가 기존의 박막트랜지스터와 비교할 때 더 효과적으로 킹크 효과를 감소시킬 수 있다는 것을 보여주었다. 또한 고온 캐리어 스트레스 조건에서의 신뢰성도 개선할 수 있음이 확인되었다.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.949-955
• /
• 2010

Nd and Ti co-doped bismuth ferrite $(Bi_{1-x}Nd_x)(Fe_{1-y}Ti_y)O_3$ (x, y = 0, 0.05, 0.1, 0.2) ceramics and thin films were synthesized through the conventional mixed-oxide process and pulsed laser deposition (PLD), respectively. Nd and Ti co-doping effect was examined with emphasis on how these impurities affect phase formation behavior as there could be the improvement in leakage current problems often associated with multiferroic $BiFeO_3$ (BFO) thin films. The lattice constants of BFO ceramics decreased with Nd doping concentration up to 10mol%, while they further decreased with Nd and Ti co-doping to about 20%. BFO thin films obtained by the PLD process revealed random polycrystalline structure. Similar to bulk BFO ceramic, Nd and Ti co-doping effectively suppressed the formation of unwanted secondary phase and thus stabilized the perovskite phase in BFO thin films.

• Advances in materials Research
• /
• 제1권3호
• /
• pp.205-219
• /
• 2012

Co-Re alloy development is prompted by the search for new materials for future gas turbines which can be used at temperatures considerably higher than the present day single crystal Ni-based superalloys. The Co-Re based alloys are designed to have very high melting range. Although Co-alloys are used in gas turbine applications today, the Co-Re system was never exploited for structural applications and basic knowledge on the system is lacking. The alloy development strategy therefore is based on studying alloying additions on simple model alloy compositions of ternary and quaternary base. Various strengthening possibilities have been explored and precipitation hardening through fine dispersion of MC type carbides was found to be a promising route. In the early stages of the development we are mainly dealing with polycrystalline alloys and therefore the grain boundary embrittlement needed to be addressed and boron addition was considered for improving the ductility. In this paper recent results on the effect of boron on the strength and ductility and the stability of the fine structure of the strengthening TaC precipitates are presented. In the beginning the alloy development strategy is briefly discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.109-112
• /
• 1995

CuInS$_2$thin film was prepared by heat treatment at vacuum 10$\^$-3/ Torr of S/In/Cu stacked layer which was deposited by sequential. And so, the polycrystalline CuInS$_2$with chalcopyrite structure was well made at heat treatment temperature of 250$^{\circ}C$ and heat treatment time of 60 min. Single phase of CuInS$_2$was formed from Cu/In composition ratio of 0.84 to 1.3. p conduction type of CuInS$_2$thin film was appeared from Cu/In competition ratio of 0.99. The highest resistivity of CuInS$_2$with p type was 1.608${\times}$10$^2$$\Omega$cm at Cu/In composition ratio of 0.99 and The lowest resistivity was 5.587${\times}$10$\^$-2/$\Omega$cm at Cu/In composition ratio of 1.3.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.570-573
• /
• 2002

Pb(Zr0.52Ti0.48)O3 (PZT) thin films were deposited on the Pt/Ti bottom electrode by rf magnetron sputtering method from target containing 5%, 25% and 50% Pb excess for applying ferroelectric random access memory (FRAM). PZT films were deposited at $300^{\circ}C$ and then they were crystallized by rapid thermal annealing (RTA) at $700^{\circ}C$. After RTA treatment, our results showed that all PZT films indicated perovskite polycrystalline structure with preferred orientation (110) and no pyrochlore phase was observed by X-ray diffraction (XRD) and by Scanning electron microscopy (SEM). A well-fabricated PZT film of excess Pb 25% capacitor showed a leakage current density in the order of $2.63{\times}10^{-7}A/cm^2$ at 100kV/cm, a remanent polarization of $3.385{\mu}C/cm^2$ and a coercive field of 41.32 kV/cm. The results showed that Pb excess of target affects to electrical properties of PZT thin film.