• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.570-576
• /
• 2004

In this paper, we design the IFFT/FFT (Inverse fast Fourier Transform/Fast Fourier Transform) modules for IEEE 802.11a-1999, which is a standard of the High-speed Wireless LAN using the OFDM (Orthogonal Frequency Division Multiplexing). The designed IFFT/FFT is the 64-point FFT to be compatible with IEEE 802.11a and the pipelined architecture which needs neither serial-to-parallel nor parallel-to-serial converter. We compare four types of IFFT/FFT modules for the hardware complexity and operation : R22SDF (Radix-2 Single-path Delay feedback), the R2SDF (Radix-2 Single-path Delay feedback), R2SDF (Radix-4 Single-path Delay Feedback), and R4SDC (Radix-4 Single-path Delay Commutator). In order to minimize the error, we design the IFFT/FFT module to operate with additional decimal parts after butterfly operation. In case of the R22SDF, the IFFT/FFT module has 44,747 gate counts excluding RAMs and the minimized error rate as compared with other types. And we know that the R22SDF has a small hardware structure as compared with other types.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.1025-1031
• /
• 2007

This paper proposes an area-efficient pipeline FFT processor for MIMO-OFDM systems with four transmitting and four receiving antennas. Since the MIMO-OFDM system transmits multiple data streams, the complexity for the MIMO-OFDM system with a single-channel FFT processor increases linearly with the increase of the number of transmit channels. The proposed FFT processor is based on multi-channel structure, and therefore it can efficiently support multiple data streams. With the mixed radix algorithm, the number of non-trivial multiplications of the proposed FFT processor is decreased. The proposed FFT processor is synthesized with CMOS $0.18{\mu}m$ process and reduces the logic gates by 25% over a 4-channel Radix-4 multi-path delay commutator (R4MDC) FFT processor. Since the MIMO-OFDM FFT processor is one of the largest modules in the systems, the proposed FFT processor will be a vast contribution improvement to the low complexity design of MIMO-OFDM systems.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.651-652
• /
• 2006

In this paper, 4-way data path 128 point pipelined FFT processor with 4-way structure is proposed. The proposed FFT processor has 4-way structure in order to meet data requirement of MB-OFDM system at 132MHz operating frequency. The FFT processor is based on R4MDC and extended to suit 4-way data path. The FFT processor is designed by Verilog HDL and the gate count is about 88k.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.790-794
• /
• 2007

This paper presents a new index mapping method for DFT (Discrete Fourier Transform) and its application to multidimensional DFT. Unlike conventional index mapping methods such as DIT (Decimation in Time) or DIF (Decimation in Frequency) algorithms, the proposed method is based on two levels of decomposition and it can be very efficiently used for implementing multidimensional DFT as well as 1-dimensional DFT. The proposed pipelined architecture for multidimensional DFT is very flexible so that it can lead to the best tradeoff between performance and hardware requirements. Also, it can be easily extended to higher dimensional DFTs since the number of CEs (Computational Elements) and DCs (Delay Commutators) increase only linearly with the dimension. Various implementation options based on different radices and different pipelining depths will be presented.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.5
• /
• pp.65-73
• /
• 2002

In this paper, we propose and verify an implementation method for a single-chip 2048 complex point FFT/IFFT in terms of sequential data processing. For the sequential processing of 2048 complex data, buffers to store the input data are necessary. Therefore, DRAM-like pipelined commutator architecture is used as a buffer. The proposed structure brings about the 60% chip size reduction compared with conventional approach by using this design method. The 16-point FFT is a basic building block of the entire FFT chip, and the 2048-point FFT consists of the cascaded blocks with five stages of radix-4 and one stage of radix-2. Since each stage requires rounding of the resulting bits while maintaining the proper S/N ratio, the convergent block floating point (CBFP) algorithm is used for the effective internal bit rounding and their method contributed to a single chip design of digital audio broadcasting system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.114-121
• /
• 2005

In this paper, Pipelined A/D converter with multi SHA structure is proposed for high speed operation. The proposed structure incorporates a multi SHA block that consists of multiple SHAs of identical characteristics in parallel to improve the conversion speed. The designed multi SHA is operated by non-overlapping clocks and the sampling speed can be improved by increasing the number of multiplexed SHAs. Pipelined A/D converter, applying the proposed structure, is designed to satisfy requirement of analog front-end of VDSL modem. The measured INL and DNL of designed A/D converter are $0.52LSB{\sim}-0.50LSB\;and\;0.80LSB{\sim}-0.76LSB$, respectively. It satisfies the design specifications for VDSL modems. The simulated SNR is about 66dB which corresponds to a 10.7 bit resolution. The power consumption is 24.32mW.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.55-64
• /
• 2004

In this paper, we propose an efficient FFT algorithm for high speed multimedia communication systems, and present its pipeline implementation results. Since the proposed algorithm is based on the radix-4 butterfly unit, the processing rate can be twice as fast as that based on the radix-2$^3$ algorithm. Also, its implementation is more area-efficient than the implementation from conventional radix-4 algorithm due to reduced number of nontrivial multipliers like using the radix-23 algorithm. In order to compare the proposed algorithm with the conventional radix-4 algorithm, the 64-point MDC pipelined FFT processor based on the proposed algorithm was implemented. After the logic synthesis using 0.6${\mu}{\textrm}{m}$ technology, the logic gate count for the processor with the proposed algorithm is only about 70% of that for the processor with the conventional radix-4 algorithm. Since the proposed algorithm can be achieve higher processing rate and better efficiency than the conventional algorithm, it is very suitable for the high speed multimedia communication systems such as WLAN, DAB, DVB, and ADSL/VDSL systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1709-1716
• /
• 2007

In this paper, ADC with multi SHA structure is proposed for high speed operation. The proposed structure incorporates a multi SHA block that consists of multiple SHAs of identical characteristics in parallel to improve the conversion speed. The designed multi SHA is operated by non-overlapping clocks and the sampling speed can be improved by increasing the number of multiplexed SHAs. Pipelined A/D converter, applying the proposed structure, is designed to satisfy requirement of analog front-end of VDSL modem. The measured INL and DNL of designed A/D converter are $0.52LSB{\sim}-0.50LSB$ and $0.80LSB{\sim}-0.76LSB$, respectively. It satisfies the design specifications for VDSL modems. The simulated SNR is about 66dB which corresponds to a 10.7 bit resolution. The power consumption is 24.32mW.