• 한국정보통신학회논문지
• /
• 제5권2호
• /
• pp.289-296
• /
• 2001

본 논문에서는 뒤틀린 니매틱 액정디스플레이를 가변적인 위상마스크로 사용하여 기존의 2진 데이터 영상에 위상변조를 추가하는 방법을 제안한다 이를 위해 액정디스플레이의 위상변조특성을 이론 및 실험적으로 조사하였고, 입사빔 세기가 매우 커지면 위상변조 특성이 변하는 현상이 존재함을 실험적으로 보였다. 위상변조가 가미된 2진 데이터 영상의 저장특성을 실험적으로 조사하기 위해 여덟 장의 홀로그램을 각다중 을 사용해서 Dupont 사의 광폴리머의 한 지점에 기록하였다. 위상변조를 사용하여 Fourier 면 홀로그램을 기록할 경우, 기존의 진폭변조방식만 사용하는 경우에 비해 빔세기 균일도를 높일 수 있어서, 같은 조건에서 더 많은 홀로그램을 기록할 수 있음을 보였다.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.43-55
• /
• 2013

본 논문에서는 원통형태의 배열구조에서 수평면(H-plane), 수직면(E-Plane) 빔조향 특성을 갖는 원통형 능동위상배열 안테나를 제안하였다. 상호결합특성이 우수한 접힌 다이폴 안테나를 원통의 배열구조에 적합하도록 설계하고, 수직과 수평으로 $8{\times}8$ 원통 배열구조를 갖는 지향성 배열안테나와 전력 분배를 위한 결합분배기를 설계 및 제작하였다. 원통배열 안테나의 복사소자 배열 간격은 반전력 빔폭과 빔 조향 시 그레이팅로브가 발생하지 않도록 결정하였다. 안테나의 빔 조향은 송수신장치 내부의 6비트 위상변위기를 이용하여 구현하였으며, 안테나 빔조향 시 수평면으로 -24도 ~ 24도, 수직면 기준으로 0도 ~ 36도의 빔조향 특성을 갖도록 고안되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.848-851
• /
• 2002

In this paper, an experimental method using a reference accelerometer has been developed to measure the in-plane vibration intensity of a beam. It has the advantages of reducing accelerometer phase error comparing with the cross spectral intensity measurement technique using an accelerometer array. It needs no measurement of the input force required in the frequency response method using the only one accelerometer This method has been used to measure the in-plane vibration intensity over the beam. The result has been compared with an input power and the vibration intensity obtained with other methods. It showed that the present experimental method can be effectively used to measure the structural in-plane vibration intensity.

• Structural Engineering and Mechanics
• /
• 제52권4호
• /
• pp.739-753
• /
• 2014

There have been many packages that can be employed to analyze plane frames. However, because most structural analysis packages suffer from closeness of system, it is very difficult to integrate it with an optimization package. To overcome the difficulty, we proposed a possible alternative, DAMDO, which integrate Design, Analysis, Modeling, Definition, and Optimization phases into an integrative environment. The DAMDO methodology employs neural networks to integrate structural analysis package and optimization package so as not to need directly to integrate these two packages. The key problem of the DAMDO approach is how to generate a set of reasonable random designs in the first phase. According to the characteristics of optimized plane frames, we proposed the ratio variable approach to generate them. The empirical results show that the ratio variable approach can greatly improve the accuracy of the neural networks, and the plane frame optimization problems can be solved by the DAMDO methodology.

• 비파괴검사학회지
• /
• 제32권2호
• /
• pp.177-184
• /
• 2012

ESPI는 비접촉 비파괴 방식으로 측정 대상체의 진동이나 변형에 따른 3차원 형상 정보의 취득에 효과적으로 사용되어 왔다. 측정 대상체와 계측 환경에 따라 면내, 면외, 전단간섭 등으로 구분할 수 있으며, 간섭계를 구성하는 광소자의 형태에 따라 벌크형과 광섬유형으로 나뉜다. 광섬유형 시스템은 크기가 작고 휴대하기 편하여 시스템 구성 및 정렬이 매우 용이하다. 본 논문에서는 광섬유 면외 ESPI를 이용한 광학계를 구성하였고, PZT를 이용하여 위상 변조를 ${\pi}/2$만큼 주기적으로 가하여 CCD 카메라에서 이미지를 획득하였다. 획득한 스페클 패턴 이미지는 후처리 과정을 통해 측정 대상체의 3차원 위상 정보를 얻게 된다. 내부 결함이 존재하는 압력용기에 질소 가스를 주입하여 변화되는 phase map을 관찰하였고, 또한 phase map의 후처리를 통하여 압력에 따른 대상체의 변화를 3차원으로 확인하였다.

• 한국광학회지
• /
• 제12권4호
• /
• pp.339-344
• /
• 2001

특히 디스크형 기록 매질에 홀로그래픽 데이터를 저장함에 있어서 뒤틀린 니매틱 액정디스플레이를 사용하여 세기와 위상을 동시에 변조하는 이진 데이터 표현 방법을 제안한다. 세기 변조만을 생각하면 제안한 방법을 이진 비트 값 0과 1이 액정디스플레이 픽셀의 어둡고(off) 밝은(on) 상태로 (또는 그 반대로) 각각 표현되기 때문에 기존의 방법과는 다르지 않다. 그러나 제안한 방법에서는 on 픽셀을 통과하는 빔들이 두 가지의 서로 다른 위상 지연을 가지도록 제어된다. 만약 이 두 종류의 빔들 간의 위상지연 차이가 180도에 가까우면 Fourier 면 홀로그램 기록 시 기록 면에서 데이터 영상의 dc 성분을 감소시킬 수 있으며 따라서 빔 세기분포를 향상 시킬 수 있다. 그리고 제안한 방법의 유용성을 실험적으로도 입증하였다.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.88-96
• /
• 1997

This paper suggests a new non-linear friction compensation for digital control systems. This control adopts a hysteresis nonlinear element which can introduce the phase lead of the control system to compensate the phase delay comes from the inherent time delay of a digital control. A proper Lyapunov function is selected and the Lyapunov direct method is used to prove the asymptotic stability of the suggested control.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.987-993
• /
• 1996

This report suggests a new non-linear friction compensation for digital control systems. This control adopts a hysteric nonlinear clement which can introduce the phase lead of the control system to compensate the phase delay comes from the inherent time delay of a digital control. The Lyapunov direct method is used to prove the asymtotic stability of the suggested control, and the stability and the effectiveness are verified analytically and experimentally on a single axis servo driving system.

• The Journal of Korean Physical Therapy
• /
• 제17권4호
• /
• pp.633-650
• /
• 2005

The aim of this study was to investigate the kinematics of young adults during ascent ramp climbing at different inclinations. Twenty-three subjects ascended a four step at four different inclinations(level, $8^{\circ},\;16^{\circ},\;24^{\circ}$). The 3-D kinematics was analysed by a camera-based falcon system. Groups difference was tested with one -way ANOVA and SNK test. The different kinematic patterns of ramp ascent were analysed and compared to level walking patterns. The kinematics of ramp walking could be clearly distinguished from the kinematics of level walking. In sagittal plane, Ankle joint was more dorsiflexed at initial contact and Max. dorsiflex. during stance phase with $16^{\circ},\;24^{\circ}$ inclination and more plantarflexed at toe off and Max. plantarflex. during swing phase with $24^{\circ}$(p<.001). Knee joint was more flexed at initial contact with $16^{\circ},\;24^{\circ}$ inclination(p<.001). Hip joint was more flexed at initial contact and Max. flex. during swing phase with $16^{\circ},\;24^{\circ}$ inclination and at toe off with $24^{\circ}$(p<.001) and was more extended at Max. ext. during stance phase with $24^{\circ}$(p<.05). In frontal plane, ankle joint was more everted at Max. eversion. during stance phase with $16^{\circ},\;24^{\circ}$ inclination(p<.001). Knee joint was more increased at Max. varus. during stance phase with $16^{\circ},\;24^{\circ}$ inclination(p<.001). Hip joint was not differentiated with different inclinations. In horizontal plane, all joints were not differentiated with different inclinations. Conclusionally, In ascent ramp walking, the different gait pattern generally occurred at over $16^{\circ}$ on the ascending ramp in sagittal and frontal plane. These results suggest that there is a certain inclination angle or angular range where subjects do switch between a level walking and a ascent ramp walking gait pattern. This shows their motor control strategy between level and ascent ramp walking. Further studies are necessary to confirm and detect the ascent ramp gait patterns.

• Journal of Animal Science and Technology
• /
• 제61권1호
• /
• pp.1-9
• /
• 2019

Little is known about the effects of the plane of nutrition on growth performance and meat quality of grow-finish pigs under commercial production conditions. The present study was thus addressed to this virtually unanswered question. One hundred and two barrows and 102 gilts weighing approximately 24 kg were fed phase I and II grower diets with a high, medium, or low plane of nutrition (HP, MP, or LP) to approximately 43 and 70 kg, respectively, in 6 replicates (pens). Subsequently, the HP and MP groups were fed the HP and MP1 finisher diets, respectively, the LP group being fed a second MP (MP2) finisher diet (LP1 group). Moreover, 68 LP-grower-fed barrows and gilts were added to the feeding trial and fed the MP1 and LP finisher diets to approximately 95 kg and thereafter, respectively (LP2 group). All MP diets had the lysine:calorie ratios comparable to the RNC recommendations, with < 18% differences between those of the HP and LP diets. The finisher pigs were reared in 16 pens and slaughtered at approximately 115 kg. The gain:feed ratio, but not average daily gain (ADG), was greater for the HP group than for the MP and LP during the grower phase I whereas during the grower phase II, ADG was greater (p < 0.05) for the HP and LP groups vs. MP. During the finisher phase I, ADG was less for the LP (LP1 + LP2) group vs. HP and MP, with no difference between the HP and MP groups; the gain:feed ratio was less for the LP vs. MP group. Backfat thickness was greater for the LP vs. HP group. The water holding capacity of fresh longissimus dorsi muscle (LM) and the sensory juiciness score for cooked LM were greatest for the LP group, the sensory flavor and tenderness scores being greater for the LP group vs. MP. In conclusion, results suggest that compensatory growth occurred for the LP and MP groups during the grower phase II and finisher phase I, respectively, with fat deposition increased for the LP group and that meat quality could be improved by the use of LP.