• Current Photovoltaic Research
• /
• 제10권3호
• /
• pp.84-89
• /
• 2022

c-Si solar cells currently account for more than 90% of the solar energy market. Research on tandem junction solar cells to overcome efficiency limitations is drawing attention at a time when new technologies are being developed to secure the price competitiveness of silicon solar cells. Among several candidate materials for silicon-based tandem solar cells, perovskite has recently been studied as it is suitable for the ease of process as well as for its properties as a tandem solar cell material. In this study, we want to review the research trends and technology limitations of 2-T Perovskite/SHJ tandem junction solar cells.

• 세라미스트
• /
• 제22권2호
• /
• pp.146-169
• /
• 2019

To overcome the theoretical efficiency of single-junction solar cells (> 30 %), tandem solar cells (or multi-junction solar cells) is considered as a strong nominee because of their excellent light utilization. Organic-inorganic halide perovskite has been regarded as a promising candidate material for next-generation tandem solar cell due to not only their excellent optoelectronic properties but also their bandgap-tune-ability and low-temperature process-possibility. As a result, they have been adopted either as a wide-bandgap top cell combined with narrow-bandgap silicon or CuIn_xGa_(1-x)Se₂ bottom cells or for all-perovskite tandem solar cells using narrow- and wide-bandgap perovskites. To successfully transition perovskite materials from for single junction to tandem, substantial efforts need to focus on fabricating the high quality wide- and narrow-bandgap perovskite materials and semi-transparent electrode/recombination layer. In this paper, we present an overview of the current research and our outlook regarding perovskite-based tandem solar technology. Several key challenges discussed are: 1) a wide-bandgap perovskite for top-cell in multi-junction tandem solar cells; 2) a narrow-bandgap perovskite for bottom-cell in all-perovskite tandem solar cells, and 3) suitable semi-transparent conducting layer for efficient electrode or recombination layer in tandem solar cells.

• Current Photovoltaic Research
• /
• 제3권4호
• /
• pp.107-111
• /
• 2015

Current characteristic curve of an illuminated solar cell was used to determine its reverse saturation current density ($J_0$), ideality factor (n) and resistances, by using numerical diode simulation. High efficiency amorphous silicon, heterojunction crystalline Si (HIT), plastic and organic-inorganic halide perovskite solar cell shows n=3.27 for a-Si and n=2.14 for improved HIT cell as high and low n respectively, while the perovskite and plastic cells show n=2.56 and 2.57 respectively. The $J_0$ of these cells remain within $7.1{\times}10^{-7}$ and $1.79{\times}10^{-8}A/cm^2$ for poorer HIT and improved perovskite solar cell respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.427-427
• /
• 2016

Organic-inorganic hybrid perovskite have attracted significant attention as a new revolutionary light absorber for photovoltaic device due to its remarkable characteristics such as long charge diffusion lengths (100-1000nm), low recombination rate, and high extinction coefficient. Recently, power conversion efficiency of perovskite solar cell is above 20% that is approached to crystalline silicon solar cells. Planar heterojunction perovskite solar cells have simple device structure and can be fabricated low temperature process due to absence of mesoporous scaffold that should be annealed over 500 oC. However, in the planar structure, controlling perovskite film qualities such as crystallinity and coverage is important for high performances. Those controlling methods in one-step deposition have been reported such as adding additive, solvent-engineering, using anti-solvent, for pin-hole free perovskite layer to reduce shunting paths connecting between electron transport layer and hole transport layer. Here, we studied the effect of alkali metal halide to control the fabrication process of perovskite film. During the morphology determination step, alkali metal halides can affect film morphologies by intercalating with PbI2 layer and reducing $CH3NH3PbI3{\cdot}DMF$ intermediate phase resulting in needle shape morphology. As types of alkali metal ions, the diverse grain sizes of film were observed due to different crystallization rate depending on the size of alkali metal ions. The pin-hole free perovskite film was obtained with this method, and the resulting perovskite solar cells showed higher performance as > 10% of power conversion efficiency in large size perovskite solar cell as $5{\times}5cm$. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma optical emission spectrometry (ICP-OES) are analyzed to prove the mechanism of perovskite film formation with alkali metal halides.

• 한국세라믹학회지
• /
• 제55권4호
• /
• pp.325-336
• /
• 2018

Perovskite solar cells (PSCs) are a new class of photovoltaic devices, which have attracted significant attention due to their remarkable optoelectrical properties, including high absorption coefficients, high carrier mobilities, long carrier diffusion lengths, tunable bandgaps, low cost, and facile fabrication. PSCs have reached efficiencies of 22.70% and 18.36% on rigid fluorine-doped tin oxide and poly(ethylene terephthalate) substrates, respectively; these are comparable to those of single-crystal silicon and copper-indium-gallium-selenium solar cells. Over the past eight years, the photo conversion efficiency of PSCs has been significantly improved by device-architecture adjustments, and absorber and electron/hole transport layer optimization. Each layer is important for the performance of PSCs; hence, we discuss achievements in flexible perovskite solar cells (FPSCs), covering electron/hole-transport materials, electrode materials. We give a comprehensive overview of FPSCs and put forward suggestions for their further development.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.776-791
• /
• 2014

A marvellous solar cell technology system based on organometal halide perovskites has recently shown an unprecedented progress in power conversion efficiency (PCE); the certified one of 17.9% and unconfirmed of 19.3%, as well as the estimated electricity with a generating cost lower than the half of conventional methods based on fossil fuels. In this report the present status of stability with regards to moisture, ambient temperature, ultraviolet and lead toxicity as well as the key technological developments for the early commercialization are covered. Comprehensive understanding of material science for perovskites is required, together with complete encapsulation technologies beyond those for OLEDs, in order to ensure a 20-year-longer-than lifetime of PSCs (perovskite solar cells) and the stability according to the IEC 61646 damp heat test standard, which will result in the replacement of silicon solar cells with PSCs.

• 한국콘텐츠학회논문지
• /
• 제21권12호
• /
• pp.918-925
• /
• 2021

페로브스카이트 태양전지는 기존의 실리콘 태양전지를 대체하는 차세대 태양전지로서, 페로브스카이트 구조를 가진 유-무기 하이브리드 물질을 광 활성층으로 사용하는 태양전지 소자로 고효율, 저가의 용액 공정 및 저온 공정에 유리한 장점들을 가지고 있으며 지난 10년간 빠른 효율 향상을 보여주었다. 이러한 페로브스카이트 태양전지의 상용화 과정에서 대면적 코팅 방법에 대해서 연구개발이 진행되어야 한다. 대면적 페로브스카이트 태양전지 대면적 코팅 방법 중 하나로 슬롯-다이 코팅방법에 대해서 연구 진행하였다. 메니스커스를 이용하여 기판 위를 지나가며 용액을 코팅하는 방법으로 3D printer에 메니스커스를 장착하여 코팅을 할 수 있도록 하였다. 코팅 시 작용하는 변수로는 bed 온도, coating speed, N₂ blowing간격, N₂ blowing 높이, N₂ blowing세기등이 있으며 이를 조절하여 페로브스카이트 흡수층을 제작 진행하였으며, 대면적 소자 제작을 위한 코팅 조건을 최적화 하였다.

• 공업화학
• /
• 제33권1호
• /
• pp.78-82
• /
• 2022

무-유기 페로브스카이트 태양전지는 2009년 3.8%에서 2020년 25.5%로 급격한 광전변환효율 상승으로 실리콘 태양전지의 효율과 경쟁할 수준이 되었다. 하지만, 페로브스카이트의 구성성분 중 유기양이온인 메틸암모늄의 열화에 대한 취약성으로 인해 태양전지 소자의 안정성은 여전히 부족하여 상업화에 걸림돌이 되고 있다. 본 연구에서는 태양전지 소자의 광전변환효율의 감소를 최소화하면서 수분 안정성 향상을 위해 열화에 취약한 메틸암모늄의 일부를 소수성의 알킬 사슬이 긴 옥틸암모늄으로 소량 부분 도입하였다. 퓨리에 변환 적외선 흡수분광법과 자외선-가시광선 흡수분광법을 이용하여 옥틸암모늄이 페로브스카이트 결정 내에 도입되었을 확인하였다. 또한, 옥틸암모늄이 소량 부분 도입된 페로브스카이트 태양전지의 광전변환효율은 16.6%로 기존 페로브스카이트 태양전지(18.5%)에 비해 소폭 감소하였지만, 수분 안정성을 나타내는 접촉각은 57.0°에서 72.2°로 크게 향상되었음을 확인하였다. 본 연구는 소수성의 알킬사슬이 긴 유기 양이온을 도입하여 페로브스카이트 태양전지의 광전변환효율과 수분 안정성을 동시에 만족시키는 페로브스카이트 조성 기술 전략을 제공하고 있다.

• Current Photovoltaic Research
• /
• 제9권1호
• /
• pp.1-5
• /
• 2021

The properties of the electron transport layer (ETL) have a great effect on perovskite solar cell performance. Depositing conformal SnO2 ETL on bottom textured silicon cells is essential to increase current density in terms of the silicon-perovskite tandem solar cells. In the recent study, the SnO2 electron transport layer deposited by the sputtering method showed an efficiency of 19.8%. Also, an electron transport layer with a sputtered TiO2 electron transport layer in a 4-terminal tandem solar cell has been reported. In this study, we synthesized SnOx ETL with a various sputtering power range of 30-60W by Radio-frequency (RF)-magnetron sputtering. The properties of SnOx thin film were characterized using ellipsometer, UV-vis spectrometer, and IV measurement. With a sputtering power of 50W, the solar cell showed the highest efficiency of 13.3%, because of the highest fill factor by the conductivity of SnOx film.

• Current Photovoltaic Research
• /
• 제6권2호
• /
• pp.31-38
• /
• 2018

Multijunction solar cells present a practical solution towards a better photovoltaic conversion for a wider spectral range. In this review, we compare different types of multi-ijunction solar cell. First, we introduce thin film multijunction solar cell include to the thin film silicon, III-V material and chalcopyrite material. Until now the maximum reported power conversion efficiencies (PCE) of solar cells having different component sub-cells are 14.0% (thin film silicon), 46% (III-V material), 4.4% (chalcopyrite material) respectively. We then discuss the development of multijunction solar cell in which c-Si is used as bottom sub-cell while III-V material, thin film silicon, chalcopyrite material or perovskite material is used as top sub-cells.