• 한국수자원학회논문집
• /
• 제47권6호
• /
• pp.513-522
• /
• 2014

최근 도시화 및 기후변화에 의한 홍수피해의 증가로 인하여 이에 대응하는 방안으로 저영향개발(LID) 요소기술에 관하여 다양하게 개발이 되고 있다. 하지만 이러한 요소기술에 대한 효율을 검증할 수 있는 표준화된 검증방법 및 기기는 부재한 실정이다. 본 연구에서는 LID 기법에 대한 물순환의 효율성 검증이 가능한 강우-유출 모의장치를 개발하였다. 소유역 내 강우가 균등하게 분사될 수 있도록 강우공간분포실험 및 유입유량-유효우량 관계 실험을 통하여 강우를 검증하고 유입되는 강우와 이로 인해 발생되는 침투 및 지표유출 관계 실험을 실시하였다. 그 결과 노즐의 종류에 따른 적정유량범위와 RPM의 관계를 정리하였으며 강우-유출 모의장치를 이용한 실험을 통해 투수면과 불투수면에서의 강우 시의 수문학적 물순환(지표유출, 중간유출, 침투량)의 관계를 정량적으로 검증하였다.

• 한국방재학회 논문집
• /
• 제6권4호통권23호
• /
• pp.57-65
• /
• 2006

본 연구에서는 본류와 지류가 만나는 합류구간, 만곡 및 사행구간이 있는 자연하천과 동일한수리모형을 제작하고 합류부를 중심으로 본류와 지류의 유량비 변화에 따라 모형의 합류부 횡단면에서 발생하는 수위차의 변화를 분석하였다. 합류이전의 최하류단면 수위를 기준으로 하는 합류부 각 단면의 최대수위 변화에 미치는 유량비의 영향은 합류부 하류구간보다 상류구간에서 더 크게 나타난다. 횡단면의 최소수위에 대한 최대수위의 변화는 합류부 중심에 가까울수록 증가하며 합류부 중심 직하류에서 최대를 보인다. 또한 합류구간 횡단면의 수면경사는 단면형태에 따라 영향을 받으며 본류에 대한 지류의 유량비가 감소할수록 수면경사도 감소한다. 기존에 제안된 일정한 곡률반경과 정형화된 단면에서 도출된 횡단면 수위차 산정 공식이 평창강과 동일하게 제작된 모형수로에서 실측값과 약 60%의 차이를 보인 반면 본 연구에서는 실측값과 약 10%의 차이를 보이는 수위차 산정 공식을 제안하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.495-502
• /
• 2014

Fast recovery diodes (FRDs) were developed using the $p^{{+}{+}}/n^-/n^{{+}{+}}$ epitaxial layers grown by low temperature epitaxy technology. We investigated the effect of electrostatic discharge (ESD) stresses on their electrical and switching properties using current-voltage (I-V) and reverse recovery time analyses. The FRDs presented a high breakdown voltage, >450 V, and a low reverse leakage current, < $10^{-9}$ A. From the temperature dependence of thermal activation energy, the reverse leakage current was dominated by thermal generation-recombination and diffusion, respectively, at low and high temperature regions. By virtue of the abrupt junction and the Pt drive-in for the controlling of carrier lifetime, the soft reverse recovery behavior could be obtained along with a well-controlled reverse recovery time of 21.12 ns. The FRDs exhibited excellent ESD robustness with negligible degradations in the I-V and the reverse recovery characteristics up to ${\pm}5.5$ kV of HBM and ${\pm}3.5$ kV of IEC61000-4-2 shocks. Likewise, transmission line pulse (TLP) analysis reveals that the FRDs can handle the maximum peak pulse current, $I_{pp,max}$, up to 30 A in the forward mode and down to - 24 A in the reverse mode. The robust ESD property can improve the long term reliability of various power applications such as automobile and switching mode power supply.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.577-587
• /
• 2004

A coaxial pulsed plasma thruster (PPT) with a Teflon cavity was designed, and its performance characteristics were examined varying stored energy, cavity length and capacitance. The PPT was tested as the entire system including the discharge circuit, and the results were explained with both the transfer efficiency and the acceleration efficiency. The transfer efficiency is defined as the fraction of energy in capacitors supplied into plasma, and the acceleration efficiency as the fraction of energy supplied into plasma converted to thrust energy. To estimate these efficiencies, the equivalent plasma resistance was defined and calculated using energy conservation during discharge. The equivalent plasma resistance proportionally increased with cavity length, and therefore the current peak increased with decreasing cavity length. The energy density calculated by the transfer efficiency was increased with decreasing cavity length. As a result, higher acceleration efficiency and lower transfer efficiency were obtained with shorter cavity length. Accordingly, there was an optimal cavity length for the thrust efficiency. The specific impulse and the impulse bit per unit stored energy ranged from 390 s and 50 $\mu$ Ns/J for a cavity length of 34 mm to 825 s and 11 $\mu$ Ns/J for a cavity length of 4 mm when the stored energy was fixed to 21.4J. Thus, it was showed that the performance of this PPT approached that of electromagnetic-acceleration-type PPT with decreasing cavity length. The PPT achieved thrust efficiencies of 10-12% at 21.4 J and 6-7% at 5.35 J at cavity lengths between 14 mm and 29 mm.

• 지질공학
• /
• 제25권4호
• /
• pp.623-627
• /
• 2015

하천 제방 붕괴로 인한 홍수위험지도를 작성하기 위하여 수치모형을 이용한 잠재적 피해 대상 지역 파악이 선행되어야 한다. 하천제방 붕괴로 인하여 빚어지는 홍수위험지도 작성에서도 흔히 수치모형이 이용되며 붕괴 시 첨두 유량은 결정 인자인 하천의 수량과 제방 붕괴 형성 및 진행에 민감하므로 이런 요소를 포함하는 물리적 모형이 필요하다. 제방 붕괴 메커니즘과 수리학적 현상이 모든 붕괴에 같다고 가정하고 하나의 물리적 제방 붕괴 수치 모형을 구축하였다. 이 연구에서는 하도 추적은 언급하지 않았으며, 단지 제방 붕괴지점에서 수문곡선을 추정하는데 초점을 두어 붕괴 지점의 경계조건을 구축하는데 집중하였다. 여기서 제안된 물리적 모형은 제방 붕괴 형성과정에 필요한 역할과 붕괴를 통한 흐름의 수리학적 설명을 담고 있다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.755-758
• /
• 2008

Currently, the increased run-off and the shortened arrival time are one of the causes of the city environmental disasters in urbanization. Therefore, it is necessary to properly design the hydrologic structures, but it is very difficult to forecast the values necessary to design from the planning stage. Moreover, as the parameter is changed due to the urban development, it is difficult not only to analyze the run-off influences but also to find the related studies and literatures. The purpose of this study is to utilize the results as the important basic data of the hydrologic structures, its proper design and run-off influences through the sensibility analysis of the model parameter variables. In this study, the absolute and relative sensibility analysis method were used to find out the correlation through the sensibility analysis of the topology and hydrology parameters. Especially, in this study, the changes in the run-off amount and volume were calculated according to increase/decrease in CN, the coefficient of discharge, and the empirical formula is prepared and proposed through the regressive analysis among the parameters. In the meantime, the parameter sensibility analysis was performed through the simulation HEC-HMS that is used and available in Korea. From the results of this study, it was found that the run-off amount is increased about by 10% when the CN value is increased by 5% before and after the development through the HEC-HMS simulation and data analysis. As long as there will be additional data collection analysis and result verification, and continuous further studies to find out the parameters proper to the domestic circumstances, it is expected to considerably contribute to the proper design of the hydrologic structures with respect to the ungauged basin.

• 한국표면공학회지
• /
• 제37권6호
• /
• pp.307-312
• /
• 2004

Extensive efforts have been made in an attempt to utilize photocatalytic properties of $TiO_2$ in visible range. $TiO_2$ and TiO-N thin films were made by the DC reactive magnetron sputtering method at $300^{\circ}C$. Various gases (Ar, $O_2$ and $N_2$) were used and Ti target was impressed by 0.6 kW-5.8 kW power range. The hysteresis phenomenon of the $TiO_2$ thin film as a function of the discharge voltage characteristic was observed to be higher as applied power increases. That of TiO-N thin film was occurred at the 5.8 kW power. The cross section and surface roughness of thin films were observed by FE-SEM and AFM. Average surface roughness of TiO-N thin film was observed as $15.9\AA$ and that of $TiO_2$ as $13.2\AA$. The crystal phases of both $TiO_2$ and TiO-N thin films were found to be anatase structure. The atomic $\beta$-N (396 eV peak in N 1s XPS) was shown in the rutile crystal of TiO-N and was considered acting as the origin of wavelength shift to the visible light.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.521-522
• /
• 2006

In this paper, hybrid air-water discharges were used to develop an optimal condition for providing a high level of water decomposition for hydrogen yield. Electrical and optical phenomena accompanying the discharges were investigated along with feeding gases, flow rates, and point-to-plane electrode gap distance. The primary focus of this experiment was put on the optical emission of the near UV range, with the energy threshold sufficient for water dissociation and excitation. The $OH(A^{2+},'=0\;X^2,"=0$) band's optical emission intensity indicated the presence of plasma chemical reactions involving hydrogen formation. In the gaseous atmosphere saturated with water vapor the OH(A-X) band intensity was relatively high compared to the liquid and transient phases although the optical emission strongly depended on the flow rate and type of feeding gas. In the gaseous phase discharge phenomenon for Ar carrier gas transformed into a gliding arc via the flow rate growth. OH(A-X) band's intensity increased according to the flow rate or residence time of He feeding gas. Reciprocal tendency was acquired for $N_2$ and Ar carrier gases. The peak value of OH(A-X) intensity was observed in the proximity of the water surface, however in the cases of Ar and $N_2$ with 0.5 SLM flow rate peaks shifted to the region below the water surface. Rotational temperature ($T_{rot}$) was estimated to be in the range of 900-3600 K, according to the carrier gas and flow rate, which corresponds to the arc-like-streamer discharge.

• 한국수자원학회논문집
• /
• 제30권5호
• /
• pp.561-570
• /
• 1997

본 연구에서는 (1) 운동과 이론에 기초한 강우, 유출 특성을 파악하고, (2) 강우 및 유수에 의해서 발생하는 침식, 퇴적량을 산정하는 모형을 연구하며, (3) 유사량 산정식, 유역의 불할 수 등이 하상변동 예측에 미치는 영향을 분석하고, (4) 평창강 유역에서 하도자료, 강우, 유츨량, 유사량 등을 실측하여 모형의 적용성을 검증하였다. 운동파 방정식을 평창강 유역에 적용하여 유출해석을 실시한 결과, 첨두 유량의 발생시간은 다소 빠르게 계산되었으나 전체적인 수문곡선의 형태 및 크기에 있어서는 비교적 실측치에 접근하고 있었다. 유사량 곡선은 유출수문곡선에 따라 변화되며, 실측치와 계산치는 비교적 일치하고 있어서 모형의 적용성을 확인할 수 있었다. 유역의 분할 소유역 개수를 증가하여 유출량 및 유사량을 계산하는 것이 실측치에 더욱 접근한 결과를 얻을 수 있었다. 6개의 유사량 산정공식 중 지표면에서는 Yalin 식을, 하도에서는 Acker-White 식을 적용하여 계산한 결과치가 실측치에 가장 가까운 결과를 얻을 수 있었다.

• Neonatal Medicine
• /
• 제25권4호
• /
• pp.153-160
• /
• 2018

Purpose: The aim of this study is to examine the tolerability and effect of early high-dose amino acid administration in extremely low birth weight infants (ELBWIs). Methods: This retrospective cohort study included ELBWI (birth weight <1,000 g, n=142). Biochemical, nutritional, and neurodevelopmental data were compared between infants who received conventional low amino acid (LAA; 1.5 g/kg/day) and those who received high amino acid (HAA; 3 g/kg/day) within the first 48 hours after birth. Neurodevelopmental data included weight, height, and head circumference at discharge, 12 to 14 and 18 to 24 months of corrected age and the Korean Bayley Scale of Infant Development II (K-BSID-II) score at 18 to 24 months of corrected age. Results: The HAA group demonstrated higher peak plasma albumin ($3.0{\pm}0.4$ vs. $3.2{\pm}0.5$, P<0.05) and lower serum creatinine ($1.7{\pm}0.9$ vs. $1.4{\pm}0.8$, P<0.05) during the first 14 days than the LAA group. Full enteral feeding was achieved significantly earlier in infants in the HAA group than in infants in the LAA group ($46.2{\pm}23.0days$ vs. $34.3{\pm}21days$, P<0.01). There was no difference between the two groups in the z score changes in all growth indicators from birth to discharge and at 12 to 14 and 18 to 24 months of corrected age, as well as in the K-BSID-II score at 18 to 24 months of corrected age. Conclusion: Aggressive administration of amino acids during the first 2 days of life in ELBWI was well tolerated and correlated with earlier full enteral feeding, but did not improve growth and neurodevelopment.