• Journal of the Korean Wood Science and Technology
• /
• 제47권6호
• /
• pp.667-673
• /
• 2019

The performance of a wooden deck made of refractory materials that have difficulties in achieving target penetrations as stipulated in the specification and quality standards for treated wood in Korea, was assessed via a case study in this research. A wooden deck built in Jinju in 2009 was selected for this study because of its fabrication method using pressure and treated refractory materials. The penetration and retention analysis did not satisfy the domestic standard for treated wood. Inspection of the deck in 2019 revealed that the deck had been attacked by decay fungi. Cap rails showed much deeper and wider checking on their surface compared with the top and base rails, resulting in a severe fungal attack. The decking boards exhibited severe fungal decay primarily in the end parts. However, the rails and balusters without checks and posts were virtually free of fungal attack irrespective of the preservative penetration measures. Copper content in the soil 5 cm away from the deck was less than 150 mg/kg, implying that copper movement in the soil was very limited. These results suggest that the inhibition of surface propagation and the protection of end surfaces are essential factors in increasing the longevity of treated wooden decks; further, the results also showed that the deck was within an acceptable range from the point of copper contamination.

• Korean Journal of Acupuncture
• /
• 제35권4호
• /
• pp.226-233
• /
• 2018

Objectives : The purpose of this study was to establish an accurate and effective method of locating acupoints of the forearm by studying bone proportional measurement. Methods : A total of 60 volunteers, 30 men and 30 women, participated in this study. 7 parts of the body were measured by a soft ruler or digital vernier calipers. The cun of the upper limb was calculated and analyzed. And the results were compared with the standard cun. Results : The bone proportional cun of the forearm based on height and femur was close to 11. It was different from the standard 12.5, 12 or 10. The cun of the forearm by thumb or finger width measurement was different from the standard too. Conclusions : We suggest that locating acupoints of the forearm needs to be done based on 11 cun. The confusion on locating acupoints of the forearm will be reduced by reflecting the result of the actual measurement.

• The Journal of Advanced Prosthodontics
• /
• 제14권3호
• /
• pp.182-202
• /
• 2022

PURPOSE. The aim of this study is to summarize various biomechanical aspects in evaluating the long-term stability of dental implants based on finite element method (FEM). MATERIALS AND METHODS. A comprehensive search was performed among published studies over the last 20 years in three databases; PubMed, Scopus, and Google Scholar. The studies are arranged in a comparative table based on their publication date. Also, the variety of modeling is shown in the form of graphs and tables. Various aspects of the studies conducted were discussed here. RESULTS. By reviewing the titles and abstracts, 9 main categories were extracted and discussed as follows: implant materials, the focus of the study on bone or implant as well as the interface area, type of loading, element shape, parts of the model, boundary conditions, failure criteria, statistical analysis, and experimental tests performed to validate the results. It was found that most of the studied articles contain a model of the jaw bone (cortical and cancellous bone). The material properties were generally derived from the literature. Approximately 43% of the studies attempted to examine the implant and surrounding bone simultaneously. Almost 42% of the studies performed experimental tests to validate the modeling. CONCLUSION. Based on the results of the studies reviewed, there is no "optimal" design guideline, but more reliable design of implant is possible. This review study can be a starting point for more detailed investigations of dental implant longevity.

• 동의생리병리학회지
• /
• 제35권5호
• /
• pp.151-161
• /
• 2021

Traditional Korean medicine (TKM) takes a holistic view that emphasizes the balance between the elements constituting the human body or between the human body and the external environment. To investigate the holistic properties of TKM, here we propose to apply the methodology of complexity science to the TKM research. Complexity science is a discipline for studying complex systems with interactions between components that raise the behaviour as a whole which can be more than the sum of their parts. We first provide an introduction to the complexity science and its research methods, particularly focusing on network science and data science approaches. Next, we briefly present the current status of TKM research employing these methods. Finally, we provide suggestions for future research elucidating the underlying mechanism of TKM, both in terms of biomedicine and humanities.

• Advances in nano research
• /
• 제16권2호
• /
• pp.165-173
• /
• 2024

The production of multipurpose cotton fabrics aimed at elevating the quality of aerobic and dance sportswear is explored in this study. Powder metallurgy, known for its high efficiency in manufacturing technological components with minimal waste, is employed as a method for fabricating brush ferrules for painting. The utilization of iron-copper material, prepared through powder metallurgy, enhances the strength and quality of the brush ferrules. A microscopic analysis reveals a robust interconnection between the particles of each layer achieved through isostatic pressure, resulting in a favorable microstructure. The relative density and strength of parts produced from copper-iron powder exhibit an increase with higher pressure levels. The application of this material in brush ferrules ensures their durability and longevity, thereby supporting the creation of artwork. The evolution of art over time reflects changing ideas and possibilities, and technological advancements have significantly improved artistic tools. The role of tools in artistic expression is paramount, and the integration of powder metallurgy materials in brush ferrules fortifies their artistic importance. In summary, this study underscores the advantages of powder metallurgy in augmenting the quality of art tools and facilitating artistic creation.

• 동의생리병리학회지
• /
• 제23권2호
• /
• pp.433-437
• /
• 2009

The purpose of this study was to measure circumference of four body parts of each Sasang groups with Bioelectrical Impedance Analysis (BIA), and evaluate its usefulness for Sasang type diagnostic test. We obtained the circumference measures of neck (CN), chest (CC), waist (CW), and hip (CH) of 91 college students using BIA and standardized by sex and age. The validity of Sasang group prediction with CC was evaluated. The Tae-Eum group (104.87${\pm}$5.19, 108.47${\pm}$4.96, 116.00${\pm}$9.39, 110.4${\pm}$5.29. neck, chest, waist and hip, respectively) has significantly (p<0.001) bigger circumferences than So-Yang (97.79${\pm}$3.82, 100.02${\pm}$4.21, 101.02${\pm}$7.88, 101.95${\pm}$4.06) and So-Eum (95.63${\pm}$4.67, 96.93${\pm}$4.80, 97.63${\pm}$7.72, 99.86${\pm}$4.40) groups at very four measures. Discriminant functions with CC can be used for Tae-Eum Sasang type diagnostic test with 91.2% of overall Percentage Correctly Predicted (PCP). Tae-Eum type-specific sensitivity was 73.3% and Tae-Eum type-specific specificity was 94.7%. The strength and weakness of measurement and standardization methods for Sasang type diagnostic test, and the methods for the standardization of physical traits with sex and age were discussed. Our study showed distinctive physical features of Tae-Eum type and the usefulness of BIA for the Sasang type diagnosis.

• 해양환경안전학회지
• /
• 제23권4호
• /
• pp.393-399
• /
• 2017

왕복동식 압축기에서 피스톤과 커넥팅로드는 중요한 부분이다. 이러한 주요부에 기계적 부하가 과도하게 가해지면 해당 기부속이 손상될 수 있으며, 교체하기도 쉽지 않고 비용도 많이 든다. 따라서 내구성과 수명에 영향을 미치는 요인을 분석할 필요가 있다. 본 연구의 주요 목적은 피스톤과 커넥팅로드의 최대 응력 집중 위치를 확인하는 것이다. 이를 위해 설계된 공기압축기의 작업 공정의 동적계산을 기반으로 피스톤 및 커넥팅로드의 응력 분석을 수행하였다. 공기압축기의 피스톤과 커넥팅로드의 3 차원 모델을 따로 설계하고, 이러한 부품들의 유한요소 해석은 수치해석적인 근사해법을 사용하였다. 피스톤은 열 경계 조건 없이 크랭크 샤프트의 각도에 따라 압력 부하를 받는다. 시뮬레이션 결과는 피스톤과 커넥팅로드의 응력 집중 위치와 그 값을 예측하고 추정할 수 있다. 그 결과 크랭크 각도 $135^{\circ}$와 $225^{\circ}$에서 피스톤은 190MPa, 커넥팅로드는 123MPa 이상의 최대 등가응력이 나타났으며 이는 인장 항복강도 이하의 값이다. 또한, 커넥팅로드와 피스톤에 계산 된 안전 계수는 1보다 높게 나타났다. 더욱이, 이러한 결과는 왕복동 공기압축기 제작사에 피스톤 및 커넥팅로드를 설계함에 있어서 최적화를 위한 참고 자료로 활용 될 수 있다.

• 한국식물병리학회지
• /
• 제1권1호
• /
• pp.33-37
• /
• 1985

황록색줄무늬모자익과 줄기 정단부가 구부러지는 증상을 보이는 대두 이병주를 채집하여 지표식물검정, 충매전염, 물리적 성질 조사, 항혈청검정 및 전자현미경검경을 하였다. 지표식물검정결과 T. expansa와 Scotia에 국부병반반응, 동부, 완두, 명아주 등에 전신감염 증상을 일으켰다. 복숭아혹진딧물에 의한 전염율은 $90\%$였다. 물리적 성질은 내열성이 $60^{\circ}C$, 내희석성이 1,000배였고, 내보존성이 2일이었다. 바이러스를 순화하여 항혈청제조결과 1:1024의 역가를 보였으며 일본 바이러스연구소에서 분양 받고 AMV 항혈청과 양성반응을 보였다. 전자현미경검경 결과 대부분 길이가 60nm인 박테리아 모양의 바이러스 입자가 검경되었다.

• Nutrition Research and Practice
• /
• 제8권5호
• /
• pp.526-532
• /
• 2014

BACKGROUND/OBJECTIVES: Acanthopanax sessiliflorus is a native Korean plant and used as a traditional medicine or an ingredient in many Korean foods. The free radical theory of aging suggests that cellular oxidative stress caused by free radicals is the main cause of aging. Free radicals can be removed by cellular anti-oxidants. MATERIALS/METHODS: Here, we examined the anti-oxidant activity of Acanthopanax sessiliflorus extract both in vitro and in vivo. Survival of nematode C. elegans under stress conditions was also compared between control and Acanthopanax sessiliflorus extract-treated groups. Then, anti-aging effect of Acanthopanax sessiliflorus extract was monitored in C. elegans. RESULTS: Stem extract significantly reduced oxidative DNA damage in lymphocyte, which was not observed by leaves or root extract. Survival of C. elegans under oxidative-stress conditions was significantly enhanced by Acanthopanax sessiliflorus stem extract. In addition, Acanthopanax sessiliflorus stem increased resistance to other environmental stresses, including heat shock and ultraviolet irradiation. Treatment with Acanthopanax sessiliflorus stem extract significantly extended both mean and maximum lifespan in C. elegans. However, fertility was not affected by Acanthopanax sessiliflorus stem. CONCLUSION: Different parts of Acanthopanax sessiliflorus have different bioactivities and stem extract have strong anti-oxidant activity in both rat lymphocytes and C. elegans, and conferred a longevity phenotype without reduced reproduction in C. elegans, which provides conclusive evidence to support the free radical theory of aging.

• 보건행정학회지
• /
• 제20권1호
• /
• pp.37-63
• /
• 2010

Public expenditures on long-term care are a matter of concern for Korea as in many other countries. The expenditure is expected to accelerate and to put pressure on public budgets, adding to that arising from insufficient retirement schemes and other forms of social spending. This study tried to foresee how much health care spending could increase in the future considering demographic and non-demographic factors as the drivers of expenditure. Previous projections of future long-term expenditure were mainly based on a given relation between spending and age structure. However, although demographic factors will surely put upward pressure on long-term care costs, other non-demographic factors, such as labor cost increase and availability of informal care, should be taken into account as well. Also, the possibility of dynamic link between health status and longevity gains needs to be considered. The model in this study is cell-base and consists of three main parts. The first part estimated the numbers of elderly people with different levels of health status by age group, gender, household type. The second part estimated the levels of long-term care services required, by attaching a probability of receiving long-term care services to each cell using from the sample from current year. The third part of the model estimated long-term care expenditure, along the demographic and non-demographic factors' change in various scenarios. Public spending on long-term care could rise from the current level of 0.2~0.3% of GDP to around 0.44~2.30% by 2040.