• Applied Science and Convergence Technology
• /
• v.25 no.4
• /
• pp.73-76
• /
• 2016

Multi-layer films of $SiN_x/SiO_x$/InSnO with anti-reflective effect were grown by new-concept plasma enhanced chemical vapor deposition system (PECVD) with hybrid plasma source (HPS). Anti-reflective effect of $SiN_x/SiO_x$/InSnO was investigated as a function of ratio of $SiN_x$ and $SiO_x$ thickness. Multi-layers deposited by PECVD with HPS represents the enhancement of anti-reflective effect with high transmittance, comparing to the layers by conventional radio frequency (RF) sputtering system. This change is strongly related to the optical and physical properties of each layer, such as refractive index, composition, film density, and surface roughness depending on the deposition system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.7
• /
• pp.680-686
• /
• 2006

Tin oxide$(SnO_2)$ thin films were prepared on glass substrate by Plasma Enhanced Chemical Vapor Deposition (PECVD) method. $SnO_2$ thin films were prepared using gas mixture of dibutyltin diacetate as a precursor and oxygen as an oxidant at 275, 325, 375, $425^{\circ}C$, respectively as a function of deposition temperature. The XRD peaks corresponded to those of polycrystalline $SnO_2$, which is in the tetragonal system with a rutil-type structure. As the deposition temperature increased, the texture plane of $SnO_2$ changed from (200) plane to denser (211) and (110) planes. Lower deposition temperature and shorter deposition time led to decreasing surface roughness and electrical resistivity of the formed thin films at $325\sim425^{\circ}C$. The properties of $SnO_2$ films were critically affected by deposition temperature and time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.995-998
• /
• 2003

This paper presents the deposition of poly-Si thin-film and fabrication of a solar cell by VHF-PECVD method. The poly-Si thin films. and pin-type solar cells are fabricated using multi-chamber cluster tool system. A 7.4% conversion efficiency was achieved from poly-Si thin film solar cells with total thickness less than $5{\mu}m$. The physical characteristic was measured by Raman spectroscopy, solar cell characteristic was measured under AM1.5 illumination.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.195-200
• /
• 1998

Since the neural network was introduced, significant progress has been made on data handling and learning algorithms. Currently, the most popular learning algorithm in neural network training is feed forward error back-propagation (FFEBP) algorithm. Aside from the success of the FFEBP algorithm, polynomial neural networks (PNN) learning has been proposed as a new learning method. The PNN learning is a self-organizing process designed to determine an appropriate set of Ivakhnenko polynomials that allow the activation of many neurons to achieve a desired state of activation that mimics a given set of sampled patterns. These neurons are interconnected in such a way that the knowledge is stored in Ivakhnenko coefficients. In this paper, the PNN model has been developed using the plasma enhanced chemical vapor deposition (PECVD) experimental data. To characterize the PECVD process using PNN, SiO$_2$films deposited under varying conditions were analyzed using fractional factorial experimental design with three center points. Parameters varied in these experiments included substrate temperature, pressure, RF power, silane flow rate and nitrous oxide flow rate. Approximately five microns of SiO$_2$were deposited on (100) silicon wafers in a Plasma-Therm 700 series PECVD system at 13.56 MHz.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.223.2-223.2
• /
• 2013

비정질 실리콘은 태양전지, 트랜지스터, 이미지 센서 등 다양한 분야에서 응용되고 있으며 새로운 박막 소자 개발을 위한 소재로서 많은 연구가 진행되고 있다. 하지만 소자개발에 있어 공정상에서 발생하는 비정질 실리콘 박막의 높은 응력(stress)은 소자의 특성을 떨어뜨리는 문제점을 갖는다. 따라서 우수한 특성의 소자 개발을 위해서는 보다 낮은 응력을 갖는 비정질 실리콘 박막 증착 및 공정 조건에 따른 응력 조절이 필요하다. 저응력의 비정질 실리콘 박막 증착은 보다 낮은 반응온도에서 증착속도를 최소로 하여 성장되어야 하는데 이는 플라즈마기상증착(Plasma enhanced chemical vapor deposition, PECVD) 시스템에 의해 가능하다. 따라서 본 연구에서는 PECVD 시스템을 사용하여 비정질 실리콘 박막을 증착하였고 그 특성을 분석하였다. 이 때 증착 온도, rf 파워, 공정 압력은 실험결과로부터 얻어진 낮은 박막 증착속도 하에서 안정적으로 증착이 가능한 조건으로 일정하게 유지하여 실험하였다. 공정 가스는 SiH4/He/N2의 혼합가스를 사용하였고 응력 조절을 위해 SiH4/He 가스비를 일정한 비율로 변화하여 비정질 실리콘 박막을 증착하였다. 증착된 박막의 두께 및 표면 특성은 field emission scanning electron microscopy 및 atomic force microscopy를 이용하여 분석하였고, energy dispersive X-ray 분석을 통하여 정량 및 정성적 분석을 수행하였다. 그리고 stress measurement system을 이용하여 박막의 응력을 측정하였고 X-ray diffraction 측정 및 ellipsometry 측정으로부터 증착된 박막의 결정성, 굴절률 및 oiptical bandgap을 분석하였다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.226-229
• /
• 2001

현재 초소형 정밀기계(MEMS;Microelectromechanical System) 소자의 가장 큰 문제점으로 대두되고 있는 점착현상을 방지하기 위하여 불화유기박막을 증착하였다. Octafluorocyclobutane(C$_4$F$_{8}$)을 소스가스를 PECVD (Plasma Enhanced CVD)와 ICP (Inductively Coupled Plasma)를 이용하여 증착하였다. 여기에 Ar을 첨가하여 플라즈마의 반응성을 높여주었다. 형성된 불화유기박막의 나노트라이볼러지 특성을 살펴보기 위하여 AFM을 통하여 증착시킨 시편의 topography를 살펴보았다. 그리고 박막의 antiadhesion의 정도를 살펴보기 위하여 cantilever와 박막의 표면 사이에 존재하는 interaction force를 측정 하였고 AFM의 force curve mode를 이용하였다 PECVB를 이용하여 증착된 박막은 ICP를 이용한 박막보다 균일하지 못한 박막을 보였으며 attractive force가 강한 것으로 사료된다.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.223-228
• /
• 1996

$SiO_2$ insulator layers on InSb have been prepared by remote PECVD system a low temperature below $200^{\circ}C$. The effects of deposition pressure, temperature, and gas flow ratio on the physical and electrical characteristics of the $SiO_2$ were studied. The InSb MIS device using $SiO_2$ was fabricated and measured its current-voltage and capacitance-voltage characteritance-voltage charateristics at 77K. The films evaluated Auger electron spectroscopy showed that composition atoms were distributed uniformaly throughout the oxide film and the outdiffusion of substrate atoms into the oxide were few. The leakage current density of the MIS device was about 6.26nA/$\textrm{cm}^2$ at 0.75MV/cm , and the breakdown voltage was about 1MV/cm. The interface-stage density at mid-bandgap extracted from 1MHz C-V measurement was $54\times 10^{11}\textrm{cm}^2-2V^{-1}$.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.8
• /
• pp.34-41
• /
• 1993

Effect of high temperature annealing conditions on Ta$_{2}O_{5}$ thin films was investigated. Ta$_{2}O_{5}$ thin films were deposited on P-type silicon substrates by plasma-enhanced chemical vapor deposition (PECVD) using tantalum ethylate. Ta(C$_{2}H_{5}O)_{5}$, and nitrous oxide. N$_{2}$O. The microstructure changed from amorphous to polycrystalline above 700.deg. C annealing temperature. The refractive index, dielectric onstant and leakage current of the film increased as annealing temperature increased. However, annealing in oxygen ambient reduced leakage currents and dielectric constant due to the formation of interfacial SiO$_{2}$ layer. By optimizing annealing temperature and ambient, leakage current lower than 10$^{-8}$ A/cm$^{2}$ and maximum capacitance of 9 fF/${\mu}m^{2}$ could be obtained.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.234-238
• /
• 1996

In this paper, Plasma-Enhanced Chemical Vapor Deposition (PECVD) modeling using Polynomial Neural Networks (PNN) has been introduced. The deposition of SiO2 was characterized via a 25-1 fractional factorial experiment, was used to train PNNs using predicted squared error (PSE). The optimal neural network structure and learning parameters were determined by means of a second fractional factorial experiment. The optimized networks minimized both learning and prediction error. From these PNN process models, the effect of deposition conditions on film properties has been studied. The deposition experiments were carried out in a Plasma Therm 700 series PECVD system. The models obtained will ultimately be used for several other manufacturing applications, including recipe synthesis and process control.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.144-148
• /
• 2013

In this paper, the ultra water-repellent thin films were prepared by RF PECVD. On the basis of surface morphology, chemical bonding states and plasma diagnostics, a formation model of clusters for the ultra water-repellent films was discussed from considerations of formation process and laser scattering results. Moreover, using laser scattering method, the relative change of quantity of nano-clusters or size of agglomerates could be confirmed. From the results, the films were deposited with nano-clusters and those of agglomerates, which formed in organosilicon plasma, and formation of agglomerates were depended on the deposition time.