• Restorative Dentistry and Endodontics
• /
• 제28권2호
• /
• pp.134-145
• /
• 2003

Mechanical properties and microleakage of two composites [conventional hybrid type DenFil (VERICOM Co., Anyang, Korea) / micro matrix hybrid type Esthet X (Dentsply Caulk, Milford, DE, U.S.A.)] were evaluated to assess whether variable light intensity curing is better than conventional curing technique. Curing was done for 40 seconds in two ways of 2 step soft-start technique and 5 step ramping technique. Three kinds of light intensities of 50, 100, $200{\;}mW/\textrm{cm}^2$ were initially used for 10, 20, 30 seconds each and the maximum intensity of $600 {\;}mW/\textrm{cm}^2$ was used for the rest of curing time in a soft-start curing tech nique. In a ramping technique, curing was done with the same initial intensities and the light intensity was increased 5 times with the same rate to the maximum intensity of $600{\;}mW/\textrm{cm}^2$. After determining conditions that showed no different mechanical properties with conventional technique, Esthet X composite was filled in a class V cavity, which dimension was $4{\times}3{\times}1.5{\;}mm$ and cured under those conditions. Microleakage was evaluated in two ways of dye penetration and maximum gap estimation through SEM observation. ANOVA and Spearman's rho test were used to confirm any statistical significance among groups. The results were as follows : 1 Several curing conditions of variable light intensities resulted in the similar mechanical properties with a conventional continuous curing technique, except conditions that start curing with an initial light intensity of $50{\;}mW/\textrm{cm}^2$. 2. Conventional and ramping techniques were better than soft-start technique in mechanical properties of microhardness and compressive strength. 3. Soft-start group that started curing with an initial light intensity of $100{\;}mW/\textrm{cm}^2$ for 10 seconds showed the least dye penetration. Soft-start group that started curing with an initial light intensity of $200{\;}mW/\textrm{cm}^2$ for 10 seconds showed the smallest marginal gap, if there was no difference among groups. 4. Soft-start technique resulted in better dye-proof margin than conventional technique(p=0.014) and ramping technique(p = 0.002). 5. There was a very low relationship(p=0.157) between the methods of dye penetration and marginal gap determination through SEM evaluation. From the results of this study, it was revealed that ramping technique would be better than conventional technique in mechanical properties, however, soft-start technique might be better than conventional one in microleakage. It was concluded that much endeavor should be made to find out the curing conditions, which have advantages of both aspects or to solve these kinds of problems through a novel idea of polymerization.

• 한국전자파학회논문지
• /
• 제27권3호
• /
• pp.330-333
• /
• 2016

본 논문에서는 차량 충돌 방지 장거리 레이더(Long Range Radar: LRR)을 위한 77 GHz 전력증폭기를 65 nm CMOS 공정을 이용하여 설계하였다. 제안한 회로는 3단 차동 전력증폭기로 공통 소스 구조와 트랜스포머를 사용했다. 측정결과로 77 GHz에서 18.7 dB의 전압 이득과 13 GHz의 3 dB 대역폭을 얻었다. 측정된 최대 출력 전력은 10.2 dBm, 입력 $P_{1dB}$는 -12 dBm, 출력 $P_{1dB}$는 5.7 dBm이며, 측정된 최대 전력 효율은 7.2 %이다. 본 전력증폭기는 1.2 V의 공급전원으로부터 140.4 mW의 DC 전력을 소모한다.

• Journal of Plant Biology
• /
• 제33권4호
• /
• pp.253-257
• /
• 1990

Callus-inducing ability of Alnus hirsuta was examined by culturing various tissues (leaf, hypocotyl, cotyledon and seed) on NT (Nagata & Takebe) medium, supplemented with 2.5$\mu$M 2,4-D. Leaf-originated callus was cultured on media varying in auxin (IBA and NAA) and cytokinin (BAP) concentrations to examine the effects of auxin and cytokinin on callus growth. Maximum growth was obtained at 10 $\mu$M IBA+10$\mu$M BAP and 10$\mu$M NAA without cytokinin. Cell suspensions established from cotyledon-originated callus yielded viable protoplasts after incubation for 16-18 hours in an enzyme mixture (1% (w/v) Onozuka R-10 0.5% (w/v) Macerozyme, CPW salts and 13% (w/v) mannitol, pH 5.8). Protoplasts were cultured on NT medium, supplemented with glucose, hormones and coconut milk. After 6 weeks of culture, protoplasts sustained cell divisions to form microcallus, which showed various colors from red to white.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권4호
• /
• pp.662-669
• /
• 2020

Objective: This study was conducted to evaluate the effect of red glasswort (RG) (Salicornia herbacea L.) curing on the physicochemical, textural and sensory properties of cooked pork loin ham (M. longissimus thoracis et lumborum). Methods: All treatments were cured with different salt and RG powder levels. RG0 treatment was prepared with only 4% NaCl (w/w) as a control, and RG25, 3% NaCl:1% RG (w/w); RG50, 2% NaCl:2% RG (w/w); RG75, 1% NaCl:3% RG (w/w); RG100, 0% NaCl:4% RG (w/w) treatments were prepared sequentially. All samples were individually vacuum packaged in polyethylene bags and stored for 7 d at 3℃±1℃. Results: The results showed that as the rate of RG substitution increased, pH value, redness, myofibrillar protein solubility, and myofibrillar fragmentation index increased (p<0.05), but salt concentration and shear force decreased (p<0.05). However, there were no significant differences in cooking loss and moisture content. In terms of sensory evaluation, RG100 exhibited higher scores in tenderness and juiciness than RG0 (p<0.05). Conclusion: The partial substitution of NaCl by RG could improve the physicochemical properties, textural and sensory characteristics of cooked pork loin. Therefore, it is suggested that RG as a natural salt replacer could be an effective ingredient for developing low-sodium cured hams.

• Journal of Microbiology and Biotechnology
• /
• 제21권12호
• /
• pp.1312-1321
• /
• 2011

Enzyme extracts of cellulase [filter paper cellulase (FPase) and carboxymethyl cellulase (CMCase)], chitinase, and chitosanase produced by Aspergillus niger NRRL-567 were evaluated. The interactive effects of initial moisture and different inducers for FP cellulase and CMCase production were optimized using response surface methodology. Higher enzyme activities [FPase $79.24{\pm}4.22$ IU/gram fermented substrate (gfs) and CMCase $124.04{\pm}7.78$ IU/gfs] were achieved after 48 h fermentation in solid-state medium containing apple pomace supplemented with rice husk [1% (w/w)] under optimized conditions [pH 4.5, moisture 55% (v/w), and inducers veratryl alcohol (2 mM/kg), copper sulfate (1.5 mM/kg), and lactose 2% (w/w)] (p<0.05). Koji fermentation in trays was carried out and higher enzyme activities (FPase $96.67{\pm}4.18$ IU/gfs and CMCase $146.50{\pm}11.92$ IU/gfs) were achieved. The nonspecific chitinase and chitosanase activities of cellulase enzyme extract were analyzed using chitin and chitosan substrates with different physicochemical characteristics, such as degree of deacetylation, molecular weight, and viscosity. Higher chitinase and chitosanase activities of $70.28{\pm}3.34$ IU/gfs and $60.18{\pm}3.82$ to $64.20{\pm}4.12$ IU/gfs, respectively, were achieved. Moreover, the enzyme was stable and retained 92-94% activity even after one month. Cellulase enzyme extract obtained from A. niger with chitinolytic and chitosanolytic activities could be potentially used for making low-molecular-weight chitin and chitosan oligomers, having promising applications in biomedicine, pharmaceuticals, food, and agricultural industries, and in biocontrol formulations.

• 태양에너지
• /
• 제11권3호
• /
• pp.74-83
• /
• 1991

본 논문은 substrate의 온도를 $200{\pm}1^{\circ}C$ 정도로 유지하며 진공저항 가열 증착법을 이용하여 (p)ZnTe/(n)Si 태양전지와 (n)CdS-(p)ZnTe/(n)Si 복접합 박막을 제작한 후 그 전기적 특성을 조사, 비교하였다. 제작한 (p)ZnTe/(n)Si 태양전지와(n)CdS-(p)ZnTe/(n)Si 복접합 박막에 대하여 $100[mW/cm^2]$의 광조사 하에서 특성을 조사한바 다음과 같은 결과를 얻었다. 단략전류$[mA/cm^2]$ (p)ZnTe/(n)Si:28 (n)CdS-(p)ZnTe/(n)Si:6.5 개방전압[mV] (p)ZnTe/(n)Si:450 (n)CdS-(p)ZnTe/(n)Si:250 충실도, FF (p)ZnTe/(n)Si:0.65 (n)CdS-(p)ZnTe/(n)Si:0.27 변환효율[%] (p)ZnTe/(n)Si:8.19 (n)CdS-(p)ZnTe/(n)Si:2.3 제작된 박막은 열처리에 의해 성능이 향상되지만 (p)ZnTe/(n)Si 태양전지는 약 $470^{\circ}C$ 이상의 온도와 15분 이상의 열처리 시간에서 그리고 (n)CdS-(p)ZnTe/(n)Si 복접합 박막은 약 $580^{\circ}C$ 이상의 온도와 15분 이상의 열처리 시간에서는 박막의 각종 구조결함으로 인한 감소현상을 나타내었다. 열처리 온도의 증가에 따라 박막의 표면저항은 감소하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.606-609
• /
• 2004

Maximum power point tracking(MPPT) is usually used for a solar power system. Many maximum power tracking techniques have been considered in the past. The microprocessors with appropriate MPPT algorithms are favored because of their flexibility and compatibility with different solar arrays. In this paper, four MPPT algorithms are analyzed and studied. Perturbation and Observation(P&O), Incremental Conductance(IncCond), which are used from the past. Improved P&O and Two-mode , which are developed P&O and IncCond algorithms. Also, the author introduces grid-connected fransformerless PV PCS to apply MPPT control. MPPT efficiency is measured by changing irradiance from $0.1kW/m^2\;to\;1kW/m^2$ and simulation was performed for each MPPT algorithm.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.626-629
• /
• 2000

The Pseudomonas aeruginosa BYK-2(KCTC 18012p) produced three kinds of glycolipids on olive oil as a substrate and purified two types of major glycolipids(Rf=0.48, BS-1; Rf=0.65, BS-2) using silica gel chromatography, TLC, HPLC, etc. From the analysis of the chemical structure, the glycolipid of BS-1 was estimated as rhamnolipid($2-O-{\alpha}-L-rhamnopyranosyl- {\alpha}-L-rhamnopyranosyl-{\beta}-hydroxyldecanoyl-{\beta}-hydroxydecanoic$ acid; M.W. 650) and BS-2 was detected as rhamnolipid methyl ester($2-O-{\alpha}-L-rhamnopyranosyl-{\alpha}-L-rhamnopyranosyl-{\beta}-hydroxyldecanoyl-{\beta}-hydroxydecanoic$ acid methyl ester; M.W. 664) by FT-IR, FAB Mass spectrometry, $^1H-NMR$, $^{13}C$ FT-NMR, DEPT, 2D-NMR (TOCSY, RELAY, NOESY, HSQC, HMBC). In particular, It was found that a marine bacterium Pseudomonas aeruginosa BYK-2(KCTC 18012P) remarkably produced rhamnolipid and rhamnolipid methyl ester simultaneously.

• 한국산업융합학회 논문집
• /
• 제22권4호
• /
• pp.395-403
• /
• 2019

The excessive need of power is creating an unbalance situation in power sector, where solar energy is one of the best solutions among other energy sources to mitigate this demand. It is globally accepted because of its flexibility and long life compared to others. A lot research is going on to enhance the energy efficiency by introducing photovoltaic (PV) power generation technology, but still irradiation of PV power is the major problem. In this manuscript, we have designed PV module using single diode methodology and also the solar conversion efficiency was boosted with maximum power point tracking (MPPT) by using perturb and observe (P&O) algorithm. The simulation was done for $1000W/m^2$ and $800W/m^2$ at solar irradiance in cell temperature of 25C and 40C degree levels in PSIM tool.

• 대한전자공학회논문지SD
• /
• 제44권8호
• /
• pp.22-29
• /
• 2007

[ $0.18{\mu}m$ ] CMOS공정을 이용하여 supply voltage 1.8V에서 2.5Gb/s 이상의 데이터 처리속도를 가지는 2:1 Multiplexer(MUX) 설계를 하였다. High speed 동작을 위한 주파수의 한계를 극복하기 위해서 4.7 nH의 on-chip micro spiral micro inductor $(20\times20{\mu}m2)$가 설계 되었고, 10개 이상의 inductor를 사용하고도 칩 면적 증가가 거의 없으면서 inductive peaking 효과를 극대화할 수 있었다. 칩 측정은 on-wafer로 진행되었고, micro spiral inductor가 있는 2:1 MUX와 그것이 없는 2:1 MUX 각각 측정하여 그 결과를 비교하였다. 측정결과 micro spiral inductor를 가진 2:1MUX가 rise time과 fall time이 1.25Gb/s에서는 rise time이 23%, fall time은 3%의 peaking 개선 효과가 있는 것을 확인하였다. 2.5Gb/s에서는 fall time이 약 5.3%, rise time 3.5%의 개선 효과를 보았다. 전체 소비전력은 61.2mW, 2.5Gb/s에서 voltage output swing은 $180mV_{p-p}$로 측정되었다.