• Physical Therapy Rehabilitation Science
• /
• v.7 no.3
• /
• pp.95-101
• /
• 2018

Objective: To determine if the provision of visual biofeedback using real-time rehabilitative ultrasound imaging (RUSI) enhances the acquisition and retention of diaphragm muscle recruitment during exercise. Design: Two group pretest posttest design. Methods: Thirty healthy subjects were randomly assigned to the verbal feedback group (VG, n=15) or the visual and verbal feedback group (VVG, n=15). The VG performed breathing exercises 10 times with verbal feedback, and the VVG also performed breathing exercises 10 times with verbal feedback and visual feedback with the use of RUSI to measure changes in diaphragm thickness (DT). For DT, the mid-axillary lines between ribs 8 and 9 on both sides were measured in standing, and then the chest wall was perpendicularly illuminated using a linear transducer with the patients in supine to observe the region between rib 8 and 9 and to obtain 2-dimensional images. DT was measured as the distance between the two parallel lines that appeared bright in the middle of the pleura and the peritoneum. After one week, three repetitions (follow-up session) were performed to confirm retention effects. Intra- and between- group percent changes in diaphragm muscle thickness were assessed. Results: In the VVG, the intervention value had a medium effect size compared to the baseline value, but the follow-up value decreased to a small effect size. In the between-group comparisons, during the intervention session, the VVG showed no significant effect on percent change of DT but had a medium effect size compared to the VG (p=0.050, Cohen's d=0.764). During the follow-up session, retention effect did not persist (p=0.311, Cohen's d=0.381). Conclusions: RUSI can be used to provide visual biofeedback and improve performance and retention in the ability to activate the diaphragm muscle in healthy subjects. Future research needs to establish a protocol for respiratory intervention to maintain the effect of diaphragmatic breathing training using RUSI with visual feedback.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.9
• /
• pp.107-112
• /
• 2016

In this paper, we propose the effects of military cardiopulmonary resuscitation(CPR) on the quality of debriefing and feedback device training. The key idea of combination debriefing and feedback device training is to maximize effects of CPR. The participants of the research were non-medic soldiers in ROK army, and had not undergone any professional CPR training before. Each group of soldier was randomized to perform of military CPR by using training method in each group. After 5 minutes of performing CPR, each D, F, DF group showed significant improvement in CPR performance. When comparing each group, the rate of success in CPR performance in DF group was significantly higher than that of F group with the average difference of 11.160(p<.01) points. In summation, the training programs that DF received seemed to be more efficient and effective than that of D and F. The fatigue level was evaluated by comparing the lactate concentration in blood after performing CPR. Through this experiment, we show that the training programs that DF received is more efficient and effective than that of D and F.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.141-144
• /
• 2000

PRML (partial response maximum-likelihood) 과 FDTS/DF (fixed-delay tree search with decision feedback)는 기록 저장 시스템에서 준최적의 성능을 보임이 잘 알려져 있다. 그러나, 위와 같은 정보열 검출 기법은 피할 수 없는 복잡도 문제를 가지고 있다. 본 논문은 최소 run 길이 제한조건 d=2를 가진 광기록 채널을 위한 다양한 저복잡도 검출 기법을 다룬다. 우선, 결정 궤환 기법을 이용한 이산 정합 여파기 (discrete matched filter with decision feedback：DMF/DF)가 기존의 PRML로부터 유도된다. 유도된 시스템은 PRML보다 결정 궤환에 의한 성능 이득을 갖는다. 또한, 메트릭 계산을 사용하지 않는 저복잡도 FDTS/DF가 유도된다. 모의실험 결과에 의하면, 유도된 저복잡도 검출 기법들은 기록 밀도 S>=5.5에서 P(D)=1+D+D/sup 2/+D/sup 3/의 target을 갖는 PRML보다 우수한 성능을 보인다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.190-195
• /
• 2000

This paper presents the fabrication of the LNA which is operating at 2.13∼2.16 GHz for IMT-2000 lot-end receiver using series feedback and resistive decoupling circuit. Series feedback added to the source lead of a transistor keep the low noise characteristics and drop the input reflection coefficient of amplifier simultaneously. Also, it increases the stability of the LNA. Resistive decoupling circuit is suitable for input stage matching because a signal at low frequency is dissipated by a resistor in the matching network The amplifier consist of GaAs FET ATF-10136 for low noise stage and VNA-25 which is internally matched MMIC for high gain stage. The amplifier is fabricated with both the RF circuits and self bias circuit on the Teflon substrate with 3.5 permittivity. The measured results of the LNA which is fabricated using above design technique are presented more than 30 dB in gain P$\_$ldB/ 17 dB and less than 0.7 dB in noise figure, 1.5 in input$.$output SWR(Standing Wave Ratio).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.510-518
• /
• 2010

In this paper, the designed and implemented results of CFL linearization chip which can be used in mobile radio and TRS terminal of UHF band(380~910 MHz), using $0.6\;{\mu}m$ BiCMOS process based on Si, are shown. As gain control circuits for modifying transmit power are inserted not only in feedback path but also in forward path, the stability of CFL is maintained. And, DC-offset correction function of S/H structure, which is suitable for walkie-talkie PTT operation and is easily implemented, is realized. The performance test results of transmitter show that the regulation of FCC emission mask at PEP 3 W(34.8 dBm) is satisfied when the CQPSK modulated signal is fed and more than 30 dBc improvement of 3rd order IMD is achieved when two-tone signal is inputted.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.9
• /
• pp.650-656
• /
• 2004

This paper presents block and timing diagrams of the DWA(data weighted averaging) to optimize a feedback time delay of the sigma-delta modulator. Through the Matlab modeling, the optimized coefficients of the integrators are obtained to design the modulator. And then the fully differential SC integrators, feedback DAC, 9-level quantizer, and DWA are designed by considering the nonideal characteristics of the modulator. The designed second-order multibit modulator is fabricated in a 0.35$\mu\textrm{m}$ CMOS process. The designed modulator achieves 73dB signal-to-noise ratio and 72dB dynamic range at 1.2Vp-p 585kHz input singal and 52.8MHz sampling frequency.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.378-385
• /
• 2013

An S-band multifunction chip with a simple interface for an active phased array base station antenna for next-generation mobile communications is designed and fabricated using commercial 0.5-${\mu}m$ GaAs pHEMT technology. To reduce the cost of the module assembly and to reduce the number of chip interfaces for a compact transmit/receive module, a digital serial-to-parallel converter and an active bias circuit are integrated into the designed chip. The chip can be controlled and driven using only five interfaces. With 6-bit phase shifting and 6-bit attenuation, it provides a wideband performance employing a shunt-feedback technique for amplifiers. With a compact size of 16 $mm^2$ ($4mm{\times}4mm$), the proposed chip exhibits a gain of 26 dB, a P1dB of 12 dBm, and a noise figure of 3.5 dB over a wide frequency range of 1.8 GHz to 3.2 GHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.107-114
• /
• 2004

This paper presents block and timing diagrams of the DWA(Data Weighted Averaging) to optimize a feedback time delay of the sigma-delta modulator. Through the MATLAB modeling, the optimized coefficients of the integrators are obtained to design the modulator. The fully differential SC integrators, feedback DAC, 9-level quantizer, and DWA are designed by considering the nonideal characteristics of the modulator. The designed third-order multibit modulator is fabricated in a 0.35${\mu}{\textrm}{m}$ CMOS process. The modulator achieves 75dB signal-to-noise ratio and 74dB dynamic range at 1.2Vp-p 825kHz input signal and 52.8MHE sampling frequency.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.44-48
• /
• 1994

A new method of quaternion feedback control for the attitude acquisition of spacecraft is suggested to limit the angular rates of rigid body which are not desirable and make a control algorithm complicate. New attitude acquisition control algorithm is evaluated and compared with the existing quaternion feedback control method for the large slewing maneuvers through simulations. The simulation results reveal that a new method is effective on limiting the angular rates of spacecraft.

• Proceedings of the KSLP Conference
• /
• 1993.12a
• /
• pp.12-12
• /
• 1993

발음검사 결과 /i/에 선행되는 /ㅅ/은 정상발음을 보였으나 그 이외의 모음에 선행되는 /ㅅ/은 모두 측음화 /ㅅ/로 규척적인 오류발음을 하고 있는 증례에 대한 발음교정에서 청각자극에 의한 feedback 및 촉ㆍ시지각을 중심으로하는 전래적 발음지도 방법으로는 개선의 효과를 볼 수 없었으므로 전기적 인공구개(D.P)를 이용한 혀운동의 시각적 feedback을 중심으로한 발음지도를 시도한 즉 측음화 /ㅅ/음의 소실이 인정되고 정상구음 /ㅅ/의 출현을 보였다. (중략)