• 응용통계연구
• /
• 제24권2호
• /
• pp.347-357
• /
• 2011

본 논문은 M/$E_n$/1 큐에서 overshoot에 대한 근사식을 제안한다. overshoot은 큐의 작업부하량과정이 어떤 한계점을 처음으로 초과한 순간에 그 초과량을 의미하는데, overshoot의 분포 및 1차, 2차 적률은 큐의 최적화문제를 푸는데 중요한 역할을 한다. 본 논문에서는 그동안 이루어진 overshoot의 분포에 대한 이론적인 결과를 바탕으로 하여 overshoot의 분포를 고객의 서비스시간의 분포와 지수분포의 선형결합으로 표현하는 근사식을 제안한다. 그리고 제안된 근사식의 정확성을 확인하기 위하여 시뮬레이션을 통해 구한 overshoot의 분포와 비교한다.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1854-1859
• /
• 2016

Consider a linear fourth-order system with no zero that is represented in terms of four specific parameters: two damping ratios and two natural frequencies. We investigate several interesting questions about the maximum overshoot of the system with respect to the four-tuple parameters. Some remarkable results are presented.

• 대한전자공학회논문지
• /
• 제12권4호
• /
• pp.15-20
• /
• 1975

원자로의 출력을 초기상태에서 요구표적 상태로 증가시켜 주는 과도기간중 출력의 Overshoot가 생기는데 이 Overshoot에 구속조건을 두는 것은 원자로를 제각함에 있어 안전사 매우 중요하다. 따라서 출력이 요구 최대허용 구동영역을 넘지 않도록 반응도를 조절하면서 초기값(no, co)에서 최종같인 요구값(2no,2co) 또는 (1. 5no,1.5co)로 출력을 증가시키는데 최대원리(Maximum principle)를 적용하였다. 그리고 이때의 스위청점, 스위청시간 및 최적제각 반응도를 구하였다. The power overshoot is rises in the output during the transient period when the output of nuclear reactor is increased from the initial state to the desired target state and certain amount of constraint on power level is of primary importance for safety control of nuclear reactor. Therefore, the maximum principle is applied to this process control in transfering its power from the initial state(no, co) to the final target state(2no, 2co or 1.5no, 1.5co), adjusting the reactivity so that its overshoot is limited within the allowable constraint required. In this case, the switching points, switching times, optimal lima and optimal control reactivity are calculated.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.957-966
• /
• 2023

본 논문에서는 새로운 실시간 적응형 PID 온도제어 기법을 제안한다. 제어대상을 표현하는 모델을 도입하여 오버슈트가 발생하지 않도록 하는 기법이다. 오버슈트의 원인이 되는 과도한 적분을 막기 위해 적분 제어량이 실시간으로 모델의 열손실을 추종하도록 적분 이득을 조정한다. 기본적으로 비례 제어는 오버슈트를 유발하지 않는다. PID 제어에서 오버슈트의 발생 원인은 적분에서 기인한다. 기존의 PID 제어는 적분이 비례 제어에 종속되고 개인이 상수로 고정되었다. 그 결과 서로에게 부정합되는 두 이득을 적용하면 과도한 오버슈트가 발생할 수 있었다. 그러나 제안하는 적응형 제어는 적분 제어량이 항상 열손실을 초과하지 않도록 능동적으로 오버슈트를 제거한다. 따라서 제안하는 기법에 따라 튜닝 실험이 필요 없는 적응형 PID 제어를 실현할 수 있다.

• 제어로봇시스템학회논문지
• /
• 제11권10호
• /
• pp.870-879
• /
• 2005

This paper presents that a transient response can be characterized by certain parameters which are correlated to characteristic polynomial coefficients. These are characteristic ratios and characteristic pulsatances by P. Naslin [4]. We have developed an approach to control directly the transient response. Firstly, speed of the response can be controlled by reconstruction form via multipliable characteristic pulsatances. Secondly, overshoot is controlled by reconstruction form via multipliable characteristic ratios. These formulas can be independently characterized by the system overshoot and the response time to a step input.

• 대한조선학회논문집
• /
• 제35권1호
• /
• pp.54-60
• /
• 1998

일반적으로 선박의 보침성능을 평가하기 위해서 spiral test가 이용되고 있다. 그러나 spiral curve를 얻기 위한 spiral시험 및 역spiral시험에 있어서 바람과 파도 등의 영향으로 많은 어려움이 따른다. 따라서 spiral 시험을 하지 않고도, zig-zag test의 overshoot angle을 이용하여 선박의 보침성능을 판정하는 방법이 시도되고 있다. 본 연구에서는 실선의 spiral 시험결과를 대상으로, K-T 조종수학모델을 적용하여 zig-zag 운동을 계산하고, overshoot angle과 보침성능과의 상관관계를 조사하였다.

• 전력전자학회논문지
• /
• 제24권6호
• /
• pp.459-462
• /
• 2019

This work presents methods for reducing overshoot voltages across the drain-source of silicon carbide (SiC) MOSFETs in grid-connected hybrid active neutral-point-clamped (ANPC) inverters. Compared with 3-level NPC-type inverter, the hybrid ANPC inverter can realize the high efficiency. However, SiC MOSFETs conduct its switching operation at high frequencies, which cause high overshoot voltages in such devices. These overshoot voltages should be reduced because they may damage switching devices and result in electromagnetic interference (EMI). Two major strategies are used to reduce the overshoot voltages, namely, adjusting the gate resistor and using a snubber capacitor. In this paper, advantages and disadvantages of these methods will be discussed. The effectiveness of these strategies is verified by experimental results.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.65-69
• /
• 2018

Due to large in-field current carrying capacity and strong mechanical strength, a REBCO wire has been regarded as a viable high temperature superconductor (HTS) option for high field MRI and > 1 GHz (>23.5 T) NMR magnets. However, a REBCO magnet is well known to have an inherent problem of field inhomogeneity, so-called 'Screening Current induced magnetic Field (SCF)'. Recently, 'field shaking' and 'current overshoot operation' techniques have been successfully demonstrated to mitigate the SCF and enhance the field homogeneity by experiments. To investigate the effectiveness of current overshooting operation technique, a numerical simulation is conducted for a test REBCO magnet composed of a stack of double pancake coils using '2D edge-element magnetic field formulation' combined with 'domain homogenization' scheme. The simulation result demonstrates that an appropriate amount of current overshoot can negate the SCF. To verify the simulation results, current overshoot experiments are conducted for the REBCO magnet in liquid nitrogen. Experimental results also demonstrate the possible application of current overshoot technique to mitigate the SCF and enhance the field homogeneity.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권11호
• /
• pp.483-493
• /
• 2002

The damping ratio ${\xi}$ of the unit-step response of a second-order discrete system is a function of only the location of the closed-loop poles and is not directly related to the location of the system zero. However, the peak overshoot of the response is the function of both the damping ratio ${\xi}$ and an angle ${\alpha}$, which is the phasor angle of the damped sinusoidal response and is determined by the relative location of the zero with respect to the closed-loop poles. Therefore, if the zero and the open-loop poles are relatively adjusted, through pole-zero cancellation, to maintain the desired (or designed) closed-loop poles, the damping ratio ${\xi}$ will also be maintained, while the angle ${\alpha}$ changes. Accordingly, when the closed-loop system poles are fixed, the peak overshoot is considered as a function of the angle ${\alpha}$ or the system zero location. In this paper the effects of the relative location of the zero on the system performance of a second-order discrete system is studied, and a design method of digital compensator which achieves a minimum peak overshoot while maintaining the desired system mode and the damping ratio of the unit step response is presented.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.204-209
• /
• 1997

This paper reports on the theoretical study of the vane motions in a positive displacement vane pump. Vane detachment cause the pressure fluctuation, noise, wear in cam ring, and decrease the volumetric efficiency. Dynamic equation of vane motion and flow continuity equation have been modeled and solved simultaneously using 4th order Runge-Kutta method. As results of analysis, vane detachment occurs due to pressure overshoot by excess compression in the pumping chamber. Amount of vane detachment has been reduced by decreasing the pressure overshoot.