• 제목/요약/키워드: Over_charge

검색결과 680건 처리시간 0.024초

Charge Pump Circuits with Low Area and High Power Efficiency for Memory Applications

  • Kang, Kyeong-Pil;Min, Kyeong-Sik
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제6권4호
    • /
    • pp.257-263
    • /
    • 2006
  • New charge pump circuits with low area and high power efficiency are proposed and verified in this paper. These pump circuits do not suffer the voltage stress higher than $V_{DD}$ across their pumping capacitors. Thus they can use the thin-oxide MOSFETs as the pumping capacitors. Using the thin-oxide capacitors can reduce the area of charge pumps greatly while keeping their driving capability. Comparing the new pump (NCP-2) with the conventional pump circuit using the thick-oxide capacitors shows that the power efficiency of NCP-2 is the same with the conventional one but the area efficiency of NCP-2 is improved as much as 71.8% over the conventional one, when the $V_{PP}/V_{DD}$ ratio is 3.5 and $V_{DD}$=1.8V.

위성 배터리 충전을 위한 전력제어유닛의 알고리즘 설계 (Design on Algorithm of Power Control Unit for Charging Satellite Battery)

  • 박정언;이병희
    • 한국위성정보통신학회논문지
    • /
    • 제12권4호
    • /
    • pp.95-99
    • /
    • 2017
  • 식 구간에서 인공위성이 필요로 하는 모든 전력을 공급하는 배터리의 수명은 인공위성의 수명과 직결된다. 배터리의 수명은 배터리 충전 방식에 의해 영향을 받으므로, 배터리 충전을 제어하는 전력제어유닛은 배터리 수명을 고려하여 설계되어야 한다. 배터리 충전은 낮 구간에서 태양전지로부터 생성된 전력을 전력제어유닛의 충전 전류 제어를 통해 이루어진다. 계절마다 다른 식 구간의 빈도를 고려하고 배터리 과충전 방지를 위하여 배터리 충전관련 변수들은 계절에 따라 각각 다르게 설계되어야 한다. 또한 충전 시 과전류 충전과 과전압 충전을 방지하기 위해 배터리 충/방전 상태, 충전전류 양, 배터리 전압, 배터리 용량, 배터리 온도, 배터리 셀 전압 등을 모니터링 하여 충전 전류를 제어한다. 인공위성에서는 각 조건을 반영하여 충전 전류를 제어하는 tapering 방식을 사용한다. 본 논문에서는 tapering 충전 방식을 적용한 인공위성 전력제어유닛의 배터리 충전 알고리즘을 설계한다. 설계된 알고리즘을 위성에 업로드 할 수 있는 코드로 변환하고 구축된 위성환경에서의 시험을 통해 동작을 검증한다.

상보형 전하이동 경로를 갖는 표준 CMOS 로직 공정용 고효율 전하펌프 회로 (Complementary Dual-Path Charge Pump with High Pumping Efficiency in Standard CMOS Logic Technology)

  • 이정찬;정연배
    • 대한전자공학회논문지SD
    • /
    • 제46권12호
    • /
    • pp.80-86
    • /
    • 2009
  • 전하펌프의 성능은 공급전압에 의해 크게 영향을 받는다. 본 논문에서는 표준 twin-well CMOS 로직 공정으로 제작 가능하며, 낮은 공급전압에서도 높은 효율을 갖는 새로운 전하펌프 회로를 제안하고 검증하였다. 제안한 전하펌프는 이중의 전하 전달 경로와 간단한 2-phase 클락을 사용한다. 한 주기의 펌핑 사이클 동안 각 펌핑 단에서 입력전압을 2배로 승압하며, 상보적으로 연결된 PMOS 트랜지스터를 전달 스위치로 사용하여 트랜지스터의 문턱전압에 의한 전압강하 없이 승압된 전압을 다음 승압 단으로 전달한다. 시뮬레이션과 측정을 통해 제안한 전하펌프를 검증하였으며, 동일한 공정조건에서 제작 가능한 기존 전하펌프들 보다 높은 출력전압과 큰 전류 구동능력 그리고 더 높은 전력효율을 가진다는 것을 확인하였다.

V2G 시스템을 위한 보조 LC 회로를 가진 고효율 양방향 공진형 컨버터 (A High Efficiency Bidirectional Resonant Converter With Auxilary LC Circuit for V2G System)

  • 트란덕홍;최우진
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2016년도 전력전자학술대회 논문집
    • /
    • pp.323-324
    • /
    • 2016
  • In this paper a high efficiency bidirectional resonant converterfor Vehicle-to-Grid applications (V2G) is proposed.The proposed converter has adopted an LC auxiliary circuit in the third winding of the transformer. With the proposed method full softswitching can be ensured in all switches over a wide range of loadsand the secondary ringing can be removed with no additional snubber or clamp circuitry.In addition, since the proposed resonant converter is able to operate at an almost constant resonant frequencyregardless of the load, CC/CV charge of the battery can be simply implemented with high efficiency. A 3.3 kW bidirectional converter for On-Board Charger of Electric Vehicle is implemented to verify the validity of the proposed method. The experimental results show the high efficiency characteristics of the proposed converter over the wide range of load in both charge and discharge mode. The maximum efficiency of the proposed system was 98.13 % at 2.3 kW during the constant voltage mode charge operation.

  • PDF

Synthesis and Characterization of a Hydroxylated Dendrimeric Gene Delivery Carrier

  • Kim, Tae-Il;Bai, Cheng-Zhe;Park, Jong-Sang
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권8호
    • /
    • pp.1317-1321
    • /
    • 2007
  • Arginine conjugated PAMAM dendrimer, PAMAM-R was modified with propylene oxide via hydroxylation of primary amines of arginine residues. About 49 amines were detected to be converted to amino alcohols by 1H NMR. The newly synthesized polymer, PAMAM-R-PO was able to completely retard pDNA from a charge ratio of 2. The average diameter of PAMAM-R-PO polyplex was found to be 242 nm at a charge ratio of 30. The Zeta-potential value of PAMAM-R-PO polyplex was able to reach 20-30 mV over a charge ratio of 10. PAMAM-R-PO indicated higher cell viability than unmodified PAMAM-R on HeLa and 293 cells because of its hydroxylated amines. Transfection experiments on 293 cells showed that the transfection efficiency of PAMAM-R-PO was found to be 1.5-1.9 times higher than that of PEI25kDa at a charge ratio of 30. The polymer eventually displayed about 2 times greater transfection efficiency than PAMAM-R at the same charge ratio in the absence of serum. Therefore, we concluded that the modification of primary amines of PAMAMR to amino alcohols gives positive effects such as reduced cytotoxicity and enhanced transfection efficiency on 293 cells for gene delivery potency of PAMAM-R.

Investigation of Endurance Degradation in a CTF NOR Array Using Charge Pumping Methods

  • An, Ho-Myoung;Kim, Byungcheul
    • Transactions on Electrical and Electronic Materials
    • /
    • 제17권1호
    • /
    • pp.25-28
    • /
    • 2016
  • We investigate the effect of interface states on the endurance of a charge trap flash (CTF) NOR array using charge pumping methods. The endurance test was completed from one cell selected randomly from 128 bit cells, where the memory window value after 102 program/erase (P/E) cycles decreased slightly from 2.2 V to 1.7 V. However, the memory window closure abruptly accelerated after 103 P/E cycles or more (i.e. 0.97 V or 0.7 V) due to a degraded programming speed. On the other hand, the interface trap density (Nit) gradually increased from 3.13×1011 cm−2 for the initial state to 4×1012 cm−2 for 102 P/E cycles. Over 103 P/E cycles, the Nit increased dramatically from 5.51×1012 cm−2 for 103 P/E cycles to 5.79×1012 cm−2 for 104 P/E cycles due to tunnel oxide damages. These results show good correlation between the interface traps and endurance degradation of CTF devices in actual flash cell arrays.

Artificial Photosynthesis Using Zeolites

  • Castagnola, Norma B.;Dutta, Prabir K.
    • Journal of Photoscience
    • /
    • 제6권3호
    • /
    • pp.91-96
    • /
    • 1999
  • Zeolites and microporouos materials continue to attract attention as novel hosts for photochemical reactions. Zeolities are attractive because of their ability to selectivity exchange and incorporate species within the void spaces and interconnecting channels, providing a spatial arrangement of molecules. Our research has primarily focused on intrazeolitic electron transfer from excited Ru(bpy)32+ in supercages of zeolite Y to a series of bipyridinium ions. In the Ru(bpy)32+ viologen-zeolite Y samples, the slowing of the back electron transfer from the bipyridinium radical cation to Ru(bpy)32+ allows for charge propagation via self exchange between diquat molecules. This provides an opportunity for permanent charge separation. When the migrating charge on the diquat radical within the zeolite reaches the surface, it can be transferred to a neutral viologen (PVS) in solution, resulting in permanent charge separation. The advantage of long-lived charge separation can be exploited for useful chemistry if suitable catablysts can be assembled on the zeolities. We have studied Ru(bpy)2 as water oxdiation catalysts. We have demonstrated that synthesis of RuO2 fibers on a zeolite via thermal decomposition of Ru3(CO)12 leads to the most active water decomposition catalyst reported to date. Because of the extensive interest of photochemical water reduction to H2, much is known about catalytic systems usin gone electron catalyst, and even more importantly, that no reaction of viologen occurred with H2 over this catalyst. The present challenge is to incorporate all these elements of the system into an architecture and we are examining zeolite membranes for this purpose.

  • PDF

PE/Ionomer블렌드의 열자격 전류 (Thermally Stimulated Currents of PE/Ionomer Blends)

  • 서광석
    • 대한전기학회논문지
    • /
    • 제40권8호
    • /
    • pp.808-815
    • /
    • 1991
  • The behavior of space charge in PE/ionomer blends has been investigated using the thermally stimulated current (TSC) technique. In the blends, at least two TSC peaks over the temperature range from -50 to 100\ulcorner are observed, one at -5 ~ 10\ulcorner (a peak) and the others at above 60\ulcorner (a peak). The a peak is assigned as the orientation of dipoles from the ionomer component. Two a peaks seem to be related to the charge trapping at sites related to the crystalline phases. One a peak is associated with the ionic interfaces and the other with the ethylene chains without the ionic interfaces. The amount of charges stored in PE/Surlyn 1652 blends increases as the poling field increases over the field range of +8 ~ +30 kV/mm, whereas that in PE/Surlyn 1601 blends increases slightly at low poling fields and then decreases at high poling fields above +10 kV/mm. Exact reasons for such a dirrerence are not known at this point.

  • PDF

납 축전지 병렬운전시 발생하는 전류 불평형 현상분석 및 대책 (Unbalance load current of Operating in Parallel of Lead acid batteries connection condition)

  • 반한식;곽철훈;최규하;목형수
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1999년도 전력전자학술대회 논문집
    • /
    • pp.210-213
    • /
    • 1999
  • A battery is the device that transforms the chemical energy into the direct-current electrical energy directly without a mechanical process. Unit cells are connected in series to obtain the necessary voltage, while being connected in parallel to organize capacity for load current and to decrease the internal resistance for corresponding the sudden shift of the load current. The circular-current, however, could be occurred when the system is driven in parallel. As a result, the new batteries are heated by over-change and discharge, and the over charge current makes to increase the rust of the positive grid and consequently the shortened life of the new batteris would be shown. In this paper, the internal resistance of charge and discharge will be balanced, through inserting the resistance into the system by way of calculation of the changed amount of internal resistance.

  • PDF

복합산화물 $(Ba Ca)TiO_3$-ZnO의 구조적 및 유전분극 특성 (The structural and dielectric polarization characteristics of composite oxide material in $(Ba Ca)TiO_3$-Zn)

  • 홍경진;임장섭;정우성;민용기;김용주;김태성
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제10권3호
    • /
    • pp.239-246
    • /
    • 1997
  • The ZnO is stabilize dielectric constant over a broad temperature range because its addition makes the relaxation time short. In this study, the composite oxide material (B $a_{0.85}$ $Ca_{0.15}$)Ti $O_{3}$ was mixed by ZnO additive material and the dielectric polarization characteristics was studied. The relative density was over 90[%] at all specimen in the structural characteristics. Among of the specimen, the relative density of (B $a_{0.85}$ $Ca_{0.15}$)Ti $O_{3}$ with ZnO (0.4mol) has a 95[%]. The grain size of composite oxide material with an increasing ZnO increased and it was 1.0[.mu.m]-1.22[.mu.m]. In the electrical characteristics, the charge and discharge current was increased by ZnO addition. The dielectric relaxation time was increased by space charge polarization at above 110[.deg. C] and the dielectric relaxation time was fixed by space charge polarization of para-dielectric layer at below 110[.deg. C]. The dielectric relaxation time was maximum when the grain size was small. The dielectric relaxation time is decreased with an additive material ZnO and interface polarization, existing void at the grain and grain boundary. The remnant polarization is increased and the coercive electric field is decreased by ZnO.

  • PDF