• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.58-65
• /
• 2009

The paper identifies noise characteristics of a nonliner image sensor model which reflects a saturation effect of each detector pixel and extends the result to estimate an image SNR (Signla-to-Noise Ratio) distribution over all the pixels in a detector. In particular, nonlinearity of a pixel is studied from two perspectives of including asymmetry of a noise PDF (Probability Distribution Function) and enhancing a pixel SNR value, in comparison to a linear model. It is noted that the proposed image SNR distribution function is useful to effectively select new optimal operation parameter values: an integration time and an pixel-summing number, even after a launch campaign, assuming sensor gain degradation in orbit or inevitable modification of some operation parameter values due to space contingency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.226-227
• /
• 2008

Pentacene based TFT showed a degraded mobility and saturation current (Ion) after exposure to the high energy ultraviolet (UV). In this article, we optimize the thickness of UV resisted layer on OTFT to restrain the degradation from protect layer deposition and study the UV aging effect of pentacene based TFT. The OTFT deivce with UV resisted layer could keep over 50% mobility after suffered UV $10^3J$.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.1
• /
• pp.63-71
• /
• 2003

This paper describes a color image segmentation algorithm based on region merging using hue difference as a restrictive condition. The proposed algorithm using mathematical morphology and a modified watershed algorithm does over-segmentation in the RGB space to preserve contour information of regions. Then, the segmentation result of color image is acquired by repeated region merging using hue differences as a restrictive condition. This stems from human visual system based on hue, saturation, and intensity. Hue difference between two regions is used as a restrictive condition for region merging because it becomes more important factor than color difference if intensity is not low. Simulation results show that the proposed color image segmentation algorithm provides efficient segmentation results with the predefined number of regions for various color images.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.8 s.239
• /
• pp.927-933
• /
• 2005

Boiling heat transfer characteristics of liquid nitrogen in a stainless steel plain tube and wire coil inserted tubes were investigated. The test tubes, which had an inner diameter of 10.6 m and a length of 1.65 m, were horizontally located. Five wire coils having different pitch and thickness were inserted into the plain tube. The pitches of the wire coils were 18.4, 27.6, and 36.8 m, and the thickness was 1.5, 2.0, and 2.5 mm respectively. Tests were conducted at a saturation temperature of $-191^{\circ}$, mass fluxes from 58 to 105 kg/$m^2s$, and heat fluxes from 22.5 to 32.7 kw/$m^2$. A direct heating method was used to apply heat to the test section. The boiling heat transfer coefficients of liquid nitrogen were represented as a function of vapor quality, which showed significant drop at the dryout vapor quality. The maximum heat transfer enhancement using the wire coil inserted tubes over the plain tube was $174\%$ for 'Wire 3' having a thickness of 2.5 mm and a pitch of 18.4 mm.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1141-1146
• /
• 2009

Experimental investigation on two-phase flow boiling heat transfer of R-410A and R-134a in horizontal small tubes is reported. The pressure drop and local heat transfer coefficients were obtained over heat flux range of 5 to $40\;kW/m^2$, mass flux range of 70 to $600\;kg/m^2s$, saturation temperature range of 2 to $12^{\circ}C$, and quality up to 1.0 in test section with inner tube diameters of 3.0 and 0.5 mm, and lengths of 2000 and 330 mm, respectively. The section was heated uniformly by applying a direct electric current to the tubes. The effects of mass flux, heat flux, and inner tube diameter, on pressure drop and heat transfer coefficient are presented. The experimental results are compared against several existing correlations. A new boiling heat transfer coefficient correlation based on the superposition model for refrigerants in small tubes is developed.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.12-16
• /
• 2003

This paper presents a compensation method for a temperature-dependent gain tilt in L-band erbium-doped fiber amplifier using a voltage-controlled attenuator. The gain tilts in the L-band of 1570-1605 nm due to a temperature change have negative slopes, whereas they have positive slopes for the increasing optical input powers in a saturation region. The proposed method utilizes these opposite gain variations to compensate for the gain tilt over a wide range of temperature. While applying forty channels with a channel spacing of 100 GHz in the L-band and changing the ambient temperature from 0 to $50^{\circ}C$, the compensation method maintained the gain deviation within 1 dB.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.1
• /
• pp.37-41
• /
• 2015

The most common structure of the current transformer (CT) consists of a length of wire wrapped many times around a silicon steel ring passed over the circuit being measured. Therefore, the primary circuit of CT consists of a single turn of the conductor, with a secondary circuit of many tens or hundreds of turns. The primary winding may be a permanent part of the current transformer, with a heavy copper bar to carry the current through the magnetic core. However, when the large current flows into a wire, it is difficult to measure its magnitude of current because the core is saturated and the core shows magnetic nonlinear characteristics. Therefore, we proposed a newly designed CT which has an air gap in the core to decrease the generated magnetic flux. Adding the air gap in the magnetic path increases the total magnetic reluctance against the same magnetic motive force (MMF). Using a ferrite core instead of steel also causes the generation of low magnetic flux. These features can protect the magnetic saturation of the CT core compared with the steel core. This technique can help the design of the CT to obtain a special shape and size.

• Journal of Aquaculture
• /
• v.7 no.1
• /
• pp.1-7
• /
• 1994

The effects of temperature and light intensity on the photosynthesis were investigated in fronds and cultivated filaments of Porphyra pseudolinearis Ueda. The optimum temperatures for total photosynthesis of fronds and filaments were $25\~30^{\circ}C\;and\;20^{\circ}C$, respectively. The photosynthetic rates of fronds and filaments based on light intensity were shown in a typical light saturation curve where the rates were constant over the light intensity of approximately 10,000 lux. The compensation points were 2,100 lux in fronds and 900 lux in filaments. The photosynthetic rate of filaments was 5 to 10 times greater than that of fronds. This would be very advantageous for filaments to conduct photosynthesis in the condition of dim light.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.E1
• /
• pp.10-15
• /
• 2007

The gas hydrates are probably most sensitive to climate change since they are stable only under specific conditions of high pressure and low temperature. One of the main factors responsible for formation of gas hydrates is the saturation of the gases with water vapor. Quantitative phase equilibrium data and understanding of the roles of water component in the phase behavior of the heterogeneous water-hydrocarbon-hydrate mixture are of importance and of engineering value. In this study, the water content of ethylene gas in equilibrium with hydrate and water phases were analyzed by theoretical and experimental methods at temperatures between 274.15 up to 291.75 K and pressures between 593.99 to 8,443.18 kPa. The experimental and theoretical enhancement factors (EF) for the water content of ethylene gas and the fugacity coefficients of water and ethylene in gas phase were determined and compared with each other over the entire range of pressure carried out in this experiment. In order to get the theoretical enhancement factors, the modified Redlich-Kwong equation of state was used. The Peng-Robinson equations and modified Redlich-Kwong equations of state were used to get the fugacity coefficients for ethylene and water in the gas phase. The results predicted by both equations agree very well with the experimental values for the fugacity coefficients of the compressed ethylene gas containing small amount of water, whereas, those of water vapor do not in the ethylene rich gas at high temperature for hydrate formation locus.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.425-435
• /
• 2016

This paper presents a comprehensive theoretical analysis and an accurate calculation method of the dead-time required to achieve zero-voltage-switching (ZVS) in a battery charger with the phase-shifted full-bridge (PSFB) topology. Compared to previous studies, this is the first time that the effects of nonlinear output filter inductance, varied Miller Plateau length, and blocking capacitors have been considered. It has been found that the output filter inductance and the Miller Plateau have a significant influence on the dead-time for ZVS when the load current varies a lot in battery charger applications. In addition, the blocking capacitor, which is widely used to prevent saturation, reduces the circulating current and consequently affects the setting of the dead-time. In consideration of these effects, accurate analytical equations of the dead-time range for ZVS are deduced. Experimental results from a 1.5kW PSFB battery charger prototype shows that, with the proposed analysis, an optimal dead-time can be selected to meet the specific requirements of a system while achieving ZVS over wide load range.