• Clean Technology
• /
• v.27 no.3
• /
• pp.269-274
• /
• 2021

Bioenergy is generally considered to be one of the options for pursuing carbon neutrality. However, for a period of time, combustion of harvested plant biomass inevitably causes more carbon dioxide in the atmosphere than combustion of fossil fuels. This paper proposes a method that predicts and minimizes the total amount and payback period of this carbon debt. As a case study, a carbon cycle impact assessment was performed for immediate switching of the currently used fossil fuels to biomass. This work points out a fundamental vulnerability in the concept of carbon neutrality. As an action plan for the sustainability of bioenergy, formulas for afforestation proportional to the decrease in the forest area and surplus harvest proportional to the increase in the forest mass are proposed. The results of optimization indicate that the carbon debt payback period is about 70 years, and the carbon dioxide in the atmosphere increases by more than 50% at a maximum and 3% at a steady state. These are theoretically predicted best results, which are expected to be worse in reality. Therefore, biomass is not truly carbon neutral, and it is inappropriate as an energy source alternative to fossil fuels. The method proposed in this work is expected to be able to contribute to the approach to carbon neutrality by minimizing present and future carbon debt of the bioenergy that is already in use.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.311-321
• /
• 2019

Greenhouse farmers often use thermal screens to reduce greenhouse heating expenses during the winter, and for shade during hot, sunny days in the summer, as it is an inexpensive solution to temperature control relative to other available options. However, accurate measurements of their emitted and absorbed radiations are important for the selection of suitable screens that offer maximum performance. Material's ability to save energy is highly dependent on these properties. Limited studies have investigated the measurement of these properties under natural conditions, but they are only applicable to materials having partial porosities. In this work, we describe a new radiation balance method for determining emissive power and absorptive capacity, as well as reflectivity, transmissivity and emissivity of materials having complete and partial transparency by using pyrgeometer and net radiometer. In this study, four materials with zero porosity, were tested. The emissivity value of PE, LD-13, LD-15 and PH-20 was $0.439{\pm}0.020$, $0.460{\pm}0.010$, $0.454{\pm}0.004$, and $0.499{\pm}0.006$, respectively. All tested samples showed high emitted radiation as compared to absorbed radiation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.413-419
• /
• 2021

The purpose of this study was to investigate the ability to treat and prevent infection by multiple Gram-negative bacterial pathogens as a last choice option in the treatment of serious infections in clinical settings. The global spread of extended-spectrum 𝛽-lactamases (ESBLs) and/or carbapenemases in microorganisms are of enormous concern to health services because they are often associated with multi-drug resistance which significantly restricts the antibiotic treatment options. In this study, the antimicrobial resistance profiles of bacteria isolated from South Korean market-derived meat samples were determined by the disc diffusion method. PCR was used to detect the presence of antibiotic resistance genes and ESBL producing genes. In total, we tested 181 isolated colonies from 36 market-derived meat samples. Single PCR and DNA sequencing results revealed that genes blaVIM, blaBIC, blaKPC, and blaSIM were present in the bacteria isolated from retail meat. The bacteria in the meat were separately sequenced and based on alignment, four different bacteria were identified. These findings suggest that bacteria found in retail meats are a reservoir for the spreading of ESBL blaVIM, blaBIC, blaKPC, and blaSIM resistance genes and bacteria strains.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.7
• /
• pp.23-29
• /
• 2011

The oxidation slag has been widely used in civil engineering project, whereas the reduced slag from electric furnace has yet to be applied. Consequently in order to find out the recycling method in civil engineering field, the mineral compositions of the reduced slag were analyzed and some tests on water quality were performed to estimate the potential release of toxic compounds. Slag-soil mixtures of 0, 10, 20 and 30%(dry weight) soil were prepared in lysimeter columns and the effluents were collected with the period of one, two and four week options in closed system, respectively. The result from qualitative and quantitative analysis using X-ray Diffraction(XRD) and X-ray Fluorescence(XRF) indicates that the main mineral of the reduced slag is $Ca_2(SiO_4)$, a kind of calcium silicate. Also, the leaching medium analyzed by Inductively Coupled Plasma Optical Emission Spectroscopy(ICP-OES) showed that main heavy metals such as Al, Fe and Mn are included in the reduced slag due to the effect of steel production process. It can be seen that the leachate does not violate the regulation guide line of waste material of heavy metal. Also the pH levels were increased from pH 6.9 for 0% soil to pH 10 for 30% soil. However the influence on leachate circulation period of one through four weeks was negligible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.529-538
• /
• 2021

This research provides suggestions for development in colleges of applied music by studying their current curriculum management status and by analyzing the curricula. To that end, this research focuses on comparing cases from four-year universities and vocational colleges. Analysis of the curricula of three departments based in Busan reveal that the curricula of applied music departments bear some resemblance to those of fine music departments, but they also have significant differences. In Busan, applied music departments have curricula influenced by fine art, but they seek differentiation in whatever ways they can. Educational institutes for applied music should expand their curricula to be more on-point, and should seek interdisciplinary courses that embrace other majors, and that promote the improvement of educational environments. Nowadays, there is a need to break away from previous discourse that happens only within the boundaries of music. For example, applied music departments could join business or media departments in launching interdisciplinary courses on music production or policies. Students would benefit from such courses as they expand the scope of their career options to consider not only being a musician but also being producers or policymakers in the arts. People from various sectors could join public discussions to jointly seek ways to promote such collaboration. Now is the time for fundamental reflection on the development of applied music in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.52-59
• /
• 2020

Currently, the domestic electricity rates for houses are charged by applying a progressive level according to monthly electricity usage. Electricity rates rise sharply wWhen the amount of electricity used is large, electricity rates rise sharply. The standardized electricity rate progressive system has limitations in that it lacks consideration of the consumers' power usage patterns and limits consumers' their options. Accordingly, the Ministry of Trade, Industry and Energy and the Korea Electric Power Corporation have been demonstrating the basis of a rate system for housing, which is a method of charging electricity according to the amount of electricity used by season and time. In this paper, 10 electricity usage patterns were derived through from AMI data analysis for 5 five years of 362 apartment complexes located in metropolitan cities. The patterns were, and then applied to the existing domestic electricity rate and time-by-time rates applied to demonstrations, and by time-by-time rates in the US and Australia. The effect of the optional rate by pattern was compared and analyzed. As a result, it was confirmed that benefits occurred in five5 patterns compared to existing rate plans, and the electricity rates increased in 5 five patterns, and t. This phenomenon shows the same phenomenon withis the same as the overseas rates, including domestic rates being demonstrated.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.68-81
• /
• 2021

The agricultural ecosystem is one of the major sources of greenhouse gas (GHG) emissions. In order to search for climate change adaptation options which mitigate GHG emissions while maintaining crop yield, it is advantageous to integrate multiple models at a high spatial resolution. The objective of this study was to develop a tool to support integrated assessment of climate change impact b y coupling the DSSAT model and the DNDC model. DNDC Regional Input File Tool(DRIFT) was developed to prepare input data for the regional mode of DNDC model using input data and output data of the DSSAT model. In a case study, GHG emissions under the climate change conditions were simulated using the input data prepared b y the DRIFT. The time to prepare the input data was increased b y increasing the number of grid points. Most of the process took a relatively short time, while it took most of the time to convert the daily flood depth data of the DSSAT model to the flood period of the DNDC model. Still, processing a large amount of data would require a long time, which could be reduced by parallelizing some calculation processes. Expanding the DRIFT to other models would help reduce the time required to prepare input data for the models.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.1
• /
• pp.105-121
• /
• 2021

To investigate and accommodate opinions on the revision of the official occupational title of the medical technologist, the Korean Association of Medical Technologists (KAMT) requested 22,638 people registered as its regular members to participate in an online survey and select their two preferred options from the alternative job titles presented. Survey responses were collected from 3,999 people (17.66%). To examine job title preferences among the KAMT members, each respondent was asked to choose two terms from the choice set. As a result, 6,958 responses were obtained, and out of the total responses, 5,555 (79.83%) indicated a choice for a job title that included the word 'analyst' as the preferred alternative. The survey results showed that "Diagnostic Laboratory Analyst" was the most preferred alternative selected by the largest proportion of respondents (2,417 responses, 34.73%), followed by "Clinical Laboratory Analyst" (1,710 responses, 24.57%), "Biomedical Pathology Technologist" (758 responses, 10.89%), "Biomedical Analyst" (730 responses, 10.49%), "Biomedical Laboratory Analyst" (730 responses, 10.03%), and "Clinical Laboratory Scientist" (646 responses, 9.26%). Therefore, based on the responses of the surveyed members, results of consultation and literature review, the Standard Classification of Occupations (SCO), and the current status of the job titles used in major countries, it is suggested that the occupational title of medical technologists should be changed by adopting "Diagnostic Laboratory Analyst", "Biomedical Laboratory Analyst", or "Biomedical Analyst" as their new official job title.

• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.23-30
• /
• 2021

Various customizing services are also being introduced in the fashion industry in line with the diversification of consumer tastes and the demand for small production of multiple varieties. However, barriers to entry are high for consumers who are not customized, and various functions are rather complicated. This study selected the three platforms that provide the most similar services to Marple, the No. 1 fashion platform sales, as comparative models and used them as a basic study for web-based fashion customization platform design through case analysis. As a research method, theoretical examinations were conducted through literature surveys, followed by web analysis based on layout, menu, color, icon, and interaction. The study found that the placement of options, the composition of menu windows, the number of point colors, and the use of icons without functions of metaphores hindered the use of customizing platforms. This work proposes a solution, and aims to contribute to increasing the usability of future customizing web by comprehensively analyzing the visual shaping elements of web platform design.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.160-167
• /
• 2022

One of the treatment options for edentulous state patients with residual ridge resorption is implant overdenture using milled bar and attachment. It not only provides improved retention and stability but can also reduce the coverage of palatal surface. In addition, when a small number of implants are used, milled bar has the effect of being splinted between implant fixtures, which makes it mechanically advantageous under functions such as mastication. The patient in this case was a maxillary edentulous state patient with a considerable amount of residual alveolar bone resorption after removing the existing failed implants. Three implants were planted on both sides and an implant overdenture was fabricated using milled bar and ADD-TOC attachment.