• 대한전기학회논문지:전력기술부문A
• /
• 제52권9호
• /
• pp.550-556
• /
• 2003

Price-based unit commitment is one of bidding strategies which a Genco may take in a practical manner. For that purpose, it is required for a Genco to decide output levels of its generators at each trade period. In this paper, an economic dispatch of thermal units is proposed considering the quantity of reserve contracts. A gradient projection algorithm is adopted as an optimization tool. A direct form of a projection matrix without any calculation of matrix inverse and multiplications is induced. Besides, it is proved that there is no need to check one of the two optimality conditions in the gradient projection method, which also requires matrix inverse and multiplications.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제19권3호
• /
• pp.327-364
• /
• 2015

In this paper, a generalized guidance law with an arbitrary pair of guidance coefficients for impact angle control is proposed. Under the assumptions of a stationary target and a lag-free missile with constant speed, necessary conditions for the guidance coefficients to satisfy the required terminal constraints are obtained by deriving an explicit closed-form solution. Moreover, optimality of the generalized impact-angle control guidance law is discussed. By solving an inverse optimal control problem for the guidance law, it is found that the generalized guidance law can minimize a certain quadratic performance index. Finally, analytic solutions of the generalized guidance law for a first-order lag system are investigated. By solving a third-order linear time-varying ordinary differential equation, the blowing-up phenomenon of the guidance loop as the missile approaches the target is mathematically proved. Moreover, it is found that terminal misses due to the system lag are expressed in terms of the guidance coefficients, homing geometry, and the ratio of time-to-go to system time constant.

• Journal of applied mathematics & informatics
• /
• 제39권3_4호
• /
• pp.469-485
• /
• 2021

In this paper, some new classes of the higher order strongly exponentially preinvex functions are introduced. New relationships among various concepts of higher order strongly exponentially preinvex functions are established. It is shown that the optimality conditions of differentiable higher order strongly exponentially preinvex functions can be characterized by exponentially variational-like inequalities. Parallelogram laws for Banach spaces are obtained as an application. As special cases, one can obtain various new and known results from our results. Results obtained in this paper can be viewed as refinement and improvement of previously known results.

• Nonlinear Functional Analysis and Applications
• /
• 제27권1호
• /
• pp.23-44
• /
• 2022

In this paper, we consider and introduce some new concepts of the biconvex functions involving an arbitrary bifunction and function. Some new relationships among various concepts of biconvex functions have been established. We have shown that the optimality conditions for the general biconvex functions can be characterized by a class of bivariational-like inequalities. Auxiliary principle technique is used to propose proximal point methods for solving general bivariational-like inequalities. We also discussed the conversance criteria for the suggested methods under pseudo-monotonicity. Our method of proof is very simple compared with methods. Several special cases are discussed as applications of our main concepts and results. It is a challenging problem to explore the applications of the general bivariational-like inequalities in pure and applied sciences.

• Journal of applied mathematics & informatics
• /
• 제40권5_6호
• /
• pp.857-871
• /
• 2022

In this work, we formulated a mathematical model for divorce in marriage and extended in to an optimal control model. Firstly, we qualitatively established the model positivity and boundedness. Also we saw sensitivity analysis of the model and identified the positive and negative indices parameters. An optimal control model were developed by incorporating three time dependent control strategies (couple relationship education, reducing getting married too young & consulting separators to renew their marriage) on the deterministic model. The Pontryagin's maximum principle were used for the derivation of necessary conditions of the optimal control problem. Finally, with Newton's forward and backward sweep method numerical simulation were performed on optimality system by considering four integrated strategies. So that we reached to a result that using all three strategies simultaneously (the strategy D) is an optimal control in order to effectively control marriage divorce over a specified period of time. From this we conclude that, policymakers and stakeholders should use the indicated control strategy at a time in order to fight against Divorce in a population.

• Steel and Composite Structures
• /
• 제7권1호
• /
• pp.53-70
• /
• 2007

This paper presents a analysis of the problem of optimal design of the beams with two I-type cross section shapes. These types of beams are simply supported and subject to pure bending. The strength and stability conditions were formulated and analytically solved in the form of mathematical equations. Both global and selected types of local stability forms were taken into account. The optimization problem was defined as bicriteria. The cross section area of the beam is the first objective function, while the deflection of the beam is the second. The geometric parameters of cross section were selected as the design variables. The set of constraints includes global and local stability conditions, the strength condition, and technological and constructional requirements in the form of geometric relations. The optimization problem was formulated and solved with the help of the Pareto concept of optimality. During the numerical calculations a set of optimal compromise solutions was generated. The numerical procedures include discrete and continuous sets of the design variables. Results of numerical analysis are presented in the form of tables, cross section outlines and diagrams. Results are discussed at the end of the work. These results may be useful for designers in optimal designing of thin-walled beams, increasing information required in the decision-making procedure.

• 대한기계학회논문집
• /
• 제11권1호
• /
• pp.26-35
• /
• 1987

본 연구에서는 (1) 삭도설계에 더욱 정확한 값을 얻기 위하여 엄밀해를 가진 현수곡선이론을 바탕으로 하여 설계변수들과의 관계를 유도 및 체계화 시켰다. (2) 다목적 함수를 벡터최소화함에 따라, 얻어지는 Pareto 최적해를 구할 수 있었다. Pareto 최적해를 구하는 방법에는 중첨법, 제한법, 추정법이 있다. 여기서는 삭도의 최적화에 대한 특성과 평가값은 서로 복잡한 trad off관계를 가지고 있으므로 다목적 인 두개의 목적함수에 중첩시켜 단일목적 함수로 변환하는 가운데 Kunn-Tuck최적생의 필요조건을 적용하면 목적함수의 값 범위를 해석적으로 정하고 Pareto최적해 집합을 해석적으로 구한다. (3) 이들의 해석에 관한 수치예를 들어 설계에 기준이 되는 로 우프의 규격과 초기장력을 결정하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1256-1261
• /
• 2004

Nonlinear Response Optimization using Equivalent Static Loads (NROESL) method/algorithm is proposed to perform optimization of non-linear response structures. It is more expensive to carry out nonlinear response optimization than linear response optimization. The conventional method spends most of the total design time on nonlinear analysis. Thus, the NROESL algorithm makes the equivalent static load cases for each response and repeatedly performs linear response optimization and uses them as multiple loading conditions. The equivalent static loads are defined as the loads in the linear analysis, which generates the same response field as those in non-linear analysis. The algorithm is validated for the convergence and the optimality. The function satisfies the descent condition at each cycle and the NROESL algorithm converges. It is mathematically validated that the solution of the algorithm satisfies the Karush-Kuhn-Tucker necessary condition of the original nonlinear response optimization problem. The NROESL algorithm is applied to two structural problems. Conventional optimization with sensitivity analysis using the finite difference method is also applied to the same examples. The results of the optimizations are compared. The proposed method is very efficient and derives good solutions.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.299-306
• /
• 2006

Using a level set method and topological derivatives, a topological shape optimization method that is independent of an initial design is developed for linearly elastic structures. In the level set method, the initial domain is kept fixed and its boundary is represented by an implicit moving boundary embedded in the level set function, which facilitates to handle complicated topological shape changes. The 'Hamilton-Jacobi (H-J)' equation and computationally robust numerical technique of 'up-wind scheme' lead the initial implicit boundary to an optimal one according to the normal velocity field while minimizing the objective function of compliance and satisfying the constraint of allowable volume. Based on the asymptotic regularization concept, the topological derivative is considered as the limit of shape derivative as the radius of hole approaches to zero. The required velocity field to update the H -J equation is determined from the descent direction of Lagrangian derived from optimality conditions. It turns out that the initial holes is not required to get the optimal result since the developed method can create holes whenever and wherever necessary using indicators obtained from the topological derivatives. It is demonstrated that the proper choice of control parameters for nucleation is crucial for efficient optimization process.

• Journal of applied mathematics & informatics
• /
• 제29권3_4호
• /
• pp.621-639
• /
• 2011

The purpose of this paper is to introduce a general iterative process by viscosity approximation method with parallel method to ap-proximate a common element of the set of solutions of a mixed equilibrium problem and of the set of common fixed points of a finite family of $k_i$-strict pseudo-contractions in a Hilbert space. We obtain a strong convergence theorem of the proposed iterative method for a finite family of $k_i$-strict pseudo-contractions to the unique solution of variational inequality which is the optimality condition for a minimization problem under some mild conditions imposed on parameters. The results obtained in this paper improve and extend the corresponding results announced by Liu (2009), Plubtieng-Panpaeng (2007), Takahashi-Takahashi (2007), Peng et al. (2009) and some well-known results in the literature.