• 품질경영학회지
• /
• 제23권3호
• /
• pp.20-32
• /
• 1995

This paper is concerned with the economic selection of both the lower limit and the process mean for a continuous production process. Consider a production process where items are produced continuously. All of the items are subject to acceptance inspection. The items for which the measured values of the quality characteristic are larger than the lower limit are accepted, and those smaller than the lower limit are rejected and excluded from shipment. The process mean may be set higher to reduce the costs incurred by imperfect quality. Using a higher process mean, however, results in a higher production cost when production cost is an increasing function of the quality characteristic. Assuming that the quality characteristic is normally distributed with known variability, cost models are constructed which involve production cost, cost incurred by imperfect quality, rejection cost, and inspection cost. Methods of finding optimal values of the lower limit and the process mean are presented and numerical examples are given.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 춘계학술대회
• /
• pp.334-337
• /
• 2006

This paper considers the problem of selecting the most profitable process mean for production processes where measurement errors exist in inspection systems. For such situations, a sequential inspection procedure is proposed to reduce measurement errors. The decision to accept, reject, or take an additional inspection of an item is made at every measurement point until the number of repeated measurements reaches its upper bound. An expected profit model is constructed and the optimal process mean, the cut-off values, and the upper bound of the number of repeated measurements are obtained when accepted(rejected) items are sold at regular(reduced) price. A numerical study is performed to investigate the performance of the proposed procedure.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제18권2호
• /
• pp.129-139
• /
• 2011

We consider an optimal trading rule in this paper. We assume that the underlying asset follows a mean-reverting process and the transaction consists of one buying and one selling. To maximize the profit, we find price levels to buy low and to sell high. Associated HJB equations are used to formulate the value function. A verification theorem is provided for sufficient conditions. We conclude the paper with a numerical example.

• 한국건설관리학회논문집
• /
• 제19권3호
• /
• pp.43-51
• /
• 2018

건축물생애주기 중 유지관리단계는 비용적인 측면에서 그리고 건축물 가치 관리적인 측면에서 매우 중요한 단계이다. 그럼에도 불구하고, 아직 체계적이고 합리적인 유지관리 프로세스가 마련되어있지 않아 정확하고 선제적인 유지관리를 통한 건축물 가치상승 및 생애주기비용 관리를 적절하게 하지 못 하는 경우가 많다. 이러한 주된 원인은 유지관리 데이터에 대한 객관적인 분석을 토대로 한 프로세스를 구축하려는 노력이 미흡한 결과이다. 본 연구의 목적은 최적의 유지관리 프로세스를 개발하기 위한 기초연구로써 합리적인 유지관리 데이터 분석을 위한 데이터 체계를 구축하고, 이를 바탕으로 정량적 데이터분석에 기반 한 유지관리 프로세스를 제안하는데 있다. 본 연구는 유지관리 전문가 면담 및 관련 실무자료 분석을 통해 기존의 데이터체계를 검토하고, 그 한계점을 도출하였고 그에 대한 해답으로써 유지관리 분야의 정량적인 데이터 분석도구인 MTBF (Mean Time Between Failure)를 활용한 공간정보 기반 유지관리 데이터분석 방법을 제시하였다. 결과적으로 이러한 분석방법을 활용한 최적의 유지관리 프로세스를 제안하고 실제 유지관리 데이터에 이를 대입하여 그 효과성을 검증하였다. 체계적인 유지관리 실행을 위한 프레임으로써 활용이 될 경우 객관적이고 합리적인 유지관리 의사결정에 도움이 될 수 있을 것으로 판단되며, 이를 바탕으로 한 시스템 개발 시 유용한 기초자료로 이용될 수 있을 것으로 기대된다.

• International Journal of Quality Innovation
• /
• 제1권1호
• /
• pp.32-37
• /
• 2000

In an industrial process, the proper objective is to find the optimal operating conditions with minimum process variability around the target. Vining and Myers(1990) suggest to use the separate model for the mean response and the process varian linear predictor ${\tau}_i={\log}\;{\sigma}^2_i$ is unknown and should be estimated. Noting that the variance of $\hat{{\tau}_i}$ is heterogeneous, another appropriate D-optimality criterion $D_3$ based on the method of generalized least squares is proposed in this paper.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2150-2156
• /
• 2018

We suggest a systematic method for obtaining the optimal compression ratio in the multi-stage closed-loop compression process of carbon dioxide. Instead of adopting the compression ratio of 3 to 4 by convention, we propose a novel approach based on mathematical analysis and simulation. The mathematical analysis prescribes that the geometric mean is a better initial value than the existing empirical value in identifying the optimal compression ratio. In addition, the optimization problem considers the initial installation cost as well as the energy required for the operation. We find that it is best to use the fifth stage in the general closed-loop type carbon dioxide multi-stage compression process.

• 품질경영학회지
• /
• 제39권2호
• /
• pp.170-178
• /
• 2011

In general, a software fault detection phenonenon is described by a software reliability model based on a nonhomogeneous Poisson process(NHPP). In this paper, we propose a software reliability growth model considering the differences of the software environments in both the testing phase and the operational phase. Also, we consider the problem of determining the optimal release time and the optimal warranty period that minimize the total expected software cost which takes account of periodic software maintenance(e.g. patch, update, etc). Finally, we analyze the sensitivity of the optimal release time and warranty period based on the fault data observed in the actual testing process.

• 품질경영학회지
• /
• 제12권2호
• /
• pp.6-10
• /
• 1984

A model for obtaining optimal resetting period and optimal target value of the process quality level is proposed when the quality characteristic is subject to a linear shift in mean. Different sales conditions are considered where good items can he sold at a regular price and bad items at a discounted one. Some numerical examples are also given.

• 산업경영시스템학회지
• /
• 제10권15호
• /
• pp.39-44
• /
• 1987

A model for obtaining optimal target value and optimal production quantity of the process is described when the mean quality characteristic decreases according to the increase of production quantity. Two different cases are considered where defective items can be either sold at a reduced unit price or discarded. Some numerical examples are also given.

• Journal of the Korean Data and Information Science Society
• /
• 제18권3호
• /
• pp.773-782
• /
• 2007

The statistical process control charts are very extensively used for monitoring of process mean, deviation, defect rate or reject rate. In this paper we consider a control chart to monitor the process reject rate in the high yield process, which is based on the observed cumulative probability of the number of items inspected until r defective items are observed. We first propose selection of the optimal value of r in the CPC-r charts, and also consider the usefulness of the chart in high yield process such as semiconductor or TFT-LCD manufacturing process.