• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.40-45
• /
• 2011

In this study, the composition of optical glass for GMP(glass molding process) was designed with 'Design of Experiments' method. All the composition batch was performed by 'Create Factorial Design' method. Particularly, $SiO_2$, BaO and $Al_2O_3$ were chosen major parameters for investigating the effects of components on optical and thermal properties. BaO and $Al_2O_3$ strongly influenced on optical and thermal properties, respectively. Finally, the approximate values of desired optical and thermal values were obtained by microtuning of compositions. At the composition of $BaO:Al_2O_3:SiO_2$=10:4:48 (molar ratio), refractive index($n_d$) was 1.5833, coefficient of thermal expansion(CTE) was $104{\times}10^{-7}/^{\circ}C$.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.6
• /
• pp.42-49
• /
• 2009

The optical elements made of plastics are normally produced by mass production such as injection molding with use of precision dies and molds. It costs to prepare the dies and molds, and it is only justified to prepare such expensive dies and molds when the parts are massively produced. On the other hand, it is too expensive and inefficient when precision plastic parts are needed only in small quantities, such as a case of trial manufacturing of new products. An ultra-precision diamond cutting is one of promising processes to produce the precision plastic parts in such cases. But it is commonly believed that an ultra-precision cutting of plastics for optical components is very difficult, because they are thermo-plastic material. In the present research, an ultra-precision diamond cutting of polycarbonate (PC), that is one of typical optical materials, was tried by using elliptical vibration cutting method. It is experimentally proved that good optical surfaces were obtained by using elliptical vibration cutting in cases of grooving and flat surfaces. The maximum surface roughness of less than 60 nm in peak to valley value is acquired.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.1
• /
• pp.9-12
• /
• 2006

Al-doped ZnO(AZO)/Ag/AZO multi-layer films deposited on PET substrate by RF magnetron sputtering have a much better electrical properties than Al-doped ZnO single-layer films. The multi-layer structure consisted of three layers, AZO/Ag/AZO, the optimum thickness of Ag layers was determined to be $112{\AA}$ for high optical transmittance and good electrical conductivity. With about $1800{\AA}$ thick AZO films, the multi-layer showed a high optical transmittance in the visible range of the spectrum. The electrical and optical properties of AZO/Ag/AZO were changed mainly by thickness of Ag layers. A high quality transparent electrode, having a resistance as low as $6\;W/{\square}$ and a high optical transmittance of 87% at 550 nm, was obtained by controlling Ag deposition parameters.

• Macromolecular Research
• /
• v.15 no.1
• /
• pp.59-64
• /
• 2007

Star-shaped, nonlinear optical (NLO) material was synthesized and its optical, thermal, and electro-optic properties were investigated. Three NLO-active dipolar chromophores containing a phenylene ring substituted with a bulky alkyl chain as a conjugation bridge were chemically bonded to the core of 1,1,1-tris(4-hydroxyphenyl)ethane to form a dendritic architecture. The chemical structure and purity of the chromophore were verified by NMR spectroscopy. The chromophore exhibited a broad absorption band centered at around 608 nm tailing up to 760 nm in toluene solution and also showed a discernible solvatochromic shift in more polar solvent. The chloroform solution of the dendrimer produced an absorption band with a red-shifted maximum as large as 28 nm when compared to that of the toluene solution. It was thermally stable up to $275^{\circ}C$ in a nitrogen atmosphere and had a glass transition temperature of $76^{\circ}C$. In a preliminary result, the polymer film containing the dendritic compound exhibited a shift of 19 pm/V taken at $1.55{\mu}$.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.4
• /
• pp.217-220
• /
• 2017

We deposited transparent conductive ZTO/Ag/ZTO trilayer thin films on glass substrates through magnetron sputtering, and then conducted intense electron beam irradiation on their surfaces to investigate the effects of electron irradiation on the structural, optical, and electrical properties of these films. After deposition, we electron irradiated the ZTO/Ag/ZTO films for 10 min at electron energies of 300, 500, and 700 eV. The films that were electron irradiated at 700 eV showed a higher optical transmittance (84.2%) in the visible wavelength region and a lower resistivity ($7.2{\times}10^{-5}{\Omega}cm$) compared with the other films. The figure of merit revealed that the ZTO/Ag/ZTO films that were electron irradiated at 700 eV had a higher optical and electrical performance than the other films prepared in this study.

• Current Optics and Photonics
• /
• v.2 no.2
• /
• pp.140-146
• /
• 2018

In this paper, mesoscale optical surface structures are found to possess both geometric and wave optics features. The study reveals that geometric optic analysis cannot correctly predict the experimental results of light transmission or reflection by mesoscale optical structures, and that, for reliable analyses, a hybrid approach incorporating both geometric and wave optic theories should be employed. By analyzing the transmission patterns generated by the mesoscale periodic pyramid prism plates, we show that the wave optic feature is mainly ascribed to the edge diffraction effect and we estimate the relative contributions of the wave optic diffraction effect and the geometric refraction effect to the total scattering field distribution with respect to the relative dimension of the structures.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.157-165
• /
• 2023

We propose a highly directional waveguide grating antenna for an optical phased array, achieving high directionality of more than 97% by interleaving the trenches with different etching depths in the silicon nitride layer, and adopting a multilayered structure. Meanwhile, the multilayered structure reduces the perturbation strength, which enables a centimeter-scale radiation length. The beam-steering range is 13.2°, with a wavelength bandwidth of 100 nm. The 1-dB bandwidth of the grating is 305 nm. The multilayered grating structure has a large tolerance to the fabrication variation and is compatible with CMOS fabrication techniques.

• Korean Journal of Materials Research
• /
• v.19 no.5
• /
• pp.259-264
• /
• 2009

In this study we investigated the effect of the multi-step texturing process on the electrical and optical properties of hydrogenated Al-doped zinc oxide (HAZO) thin films deposited by rf magnetron sputtering. AZO films on glass were prepared by changing the $H_2/(Ar+H_2)$ ratio at a low temperature of $150^{\circ}C$. The prepared HAZO films showed lower resistivity and higher carrier concentration and mobility than those of non-hydrogenated AZO films. After deposition, the surface of the HAZO films was multi-step textured in diluted HCl (0.5%) for the investigation of the change in the optical properties and the surface morphology due to etching. As a result, the HAZO film fabricated under the type III condition showed excellent optical properties with a haze value of 52.3%.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.2
• /
• pp.133-137
• /
• 2014

The recent development of electro-optic devices and anticorrosion media has made it necessary investigate infrared optical systems with solid-solid interfaces of materials with amorphous characteristics. One of the most promising classes of materials for these purposes seems to be chalcogenide glasses, which are based on the Ge_Sb_Se system, have drawn much attention because of their use in preparing optical lenses and fibers that are transparent in the range of 3-12 um. In this study, a standard melt-quenching technique was used to prepare amorphous Ge_Sb_Sechalcogenideto be used in the design and manufacture of infrared optical products. The results of structural, optical, and surface roughness analyses of high purity Ge_Sb_Sechalcogenide glasses after various annealing processes reported.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.42-45
• /
• 2003

Optical fiber vibrations sensors (OFVSs) and extrinsic Fabry-Perot interferometer (EFPI) were used in damage monitoring of fiber-metal laminates(FML). The optical fiber vibration sensor and EFPI were applied in order to detect and evaluate the strain, damage and failure of FML. Damages in composites, such as matrix cracks, delamination and fiber breakage may occur as a result of excessive load, fatigue and low-velocity impacts. Indentation test was performed with the measurement of optical signal and acoustic emission (AE). The signals of the optical fiber vibration sensor due to damages were quantitatively evaluated by wavelet transform. It was found that damage information of comparable in quality to acoustic emission data could be obtained from the optical fiber vibration sensor signals.