• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.6
• /
• pp.290-296
• /
• 2003

The heteroepitaxial growth of crystalline 3C-SiC on 6H-SiC substrates using high purity silane ($SiH_4$) and prophane ($C_3H^8$) was carried out by thermal chemical vapor deposition, and growth characteristics were investigated in this study. In case that the flow ratio of C/Si and flow rate of $H_2$ were 4.0 and 5.0 slm, respectively, the growth rate of epilayers was about 1.8 $\mu$m/h at growth temperature of $1200^{\circ}C$. The Nomarski surface morphology, X-ray diffraction, Raman spectroscopy, and photoluninescence of grown epilayers were measured to investigate the crystallinity. In this study, the high quality of crystalline 3C-SiC heteropitaxial layers was observed at growth temperature of above $1150^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.1
• /
• pp.5-12
• /
• 2000

As a semiconductor material for electronic devices operated under extreme environmental conditions, silicon carbides (SiCs) have been intensively studied because of their excellent electrical, thermal and other physical properties. The growth characteristics of single- crystalline 6H-SiC homoepitaxial layers grown by a thermal chemical vapor deposition (CVD) were investigated. Especially, the successful growth condition of 6H-SiC homoepitaxial layers using a SiC-uncoated graphite susceptor that utilized Mo-plates was obtained. The CVD growth was performed in an RF-induction heated atmospheric pressure chamber and carried out using off-oriented ($3.5^{\circ}$tilt) substrates from the (0001) basal plane in the <110> direction with the Si-face side of the wafer. In order to investigate the crystallinity of grown epilayers, Nomarski optical microscopy, transmittance spectra, Raman spectroscopy, XRD, Photoluninescence (PL) and transmission electron microscopy (TEM) were utilized. The best quality of 6H-SiC homoepitaxial layers was observed in conditions of growth temperature $1500^{\circ}C$ and C/Si flow ratio 2.0 of $C_3H_8$ 0.2 sccm & $SiH_4$ 0.3 sccm.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.269-274
• /
• 1997

Silicon carbide(SiC) epilayers were grown by a thermal CVD(chemical vapor deposition) process, and their crystalline properties were investigated. Especially, the growth conditions of 6H-Sic homoepitaxial layers were obtained using a SiC-uncoated graphite susceptor that utilized Mo-plates. In order to investigate the crystallinity of grown layers, Nomarski photograph, transmittance, XRD, Raman, PL and TEM measurements were used. The best quality of 6H-SiC epilayers was obtained in conditions of growth temperature 1500$^{\circ}C$ and C/Si ratio 2.0.

• ALGAE
• /
• v.19 no.3
• /
• pp.201-205
• /
• 2004

An ectoparasitic din flagellate infesting plank tonic chaetognath, Sagitta crassa Tokioka was found, for the first time, from Korean coasts. In order to identify the species, we investigated detailed morphology of the din flagellate using Nomarski interference optics as well as epifluorescent microscopes. The parasitic din flagellate consists of an oval to rod-shaped cell with a peduncle, by which the organism attaches to the host. The cell is covered with polygonal thecal plates. The nucleus displays two different shapes according to cell cycle stages: in young trophont the nucleus is elongated and shows typical din flagellate nucleus (dinokaryon), while in matured trophont, the nucleus is dome-shaped and non-dinokaryotic. The peduncle is variable in length and is ornamented with the longitudinal striations. All these characteristics point to identity that the ectoparasitic din flagellate infecting Sagitta crassa in Korean coasts is Oodinium inlandicum Horiguchi et Ohtsuka, originally described from the Seto Inland Sea of Japan. Relationship between prevalence and host sizes differed from those in Japan.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.49-53
• /
• 1990

Laser plasma was generated by a 1 GW iodine photodissociation laser(λ=1.315${\mu}{\textrm}{m}$, E-12.7J) whose output beam was focused on a molybdenum target surface. The experiment was conducted in the vacuum chamber under 10-5Torr and several tens of laser shooting were necessary for sufficient exposure to the PBS resist. A speciman was put directly on the resist and located at a distance of 3cm from the X-ray source. The replicas of a mesh, spider's tread, a red blood cell were obtained by PBS resist and were analyzed by Nomarski and SEM. Two main effects of limitation in resolution, source size and Fresnel diffraction, are mentioned and compared with the experimental result. In this experiment, a resolution better than 1000A could be obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.145-154
• /
• 2002

CMP (Chemical mechanical polishing) process was used to control the fine grinding process induced mechanical damage of Cz Silicon wafer. Characterization of mechanical damage was carried out using Nomarski microscope, magic mirror and also using angle lapping and lifetime scanner evaluation after heat treatment. Magic mirror and lifetime scanner were very useful for the residual damage pattern characterization and CMP process was effective on the reduction of fine grinding induced mechanical damage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.695-701
• /
• 2016

Be-doped GaSb layers were grown on highly mismatched semi-insulating GaAs substrate (001) with $2^{\circ}$ offcut towards <110> at low growth temperature, by molecular beam epitaxy (MBE). The influence of Be doping on the crystallographic quality, surface morphology, and electrical properties, was assessed by X-ray diffraction, Nomarski microscopy, and Hall effect measurements, respectively. Be impurities are well behaved acceptors with hole concentrations as high as $9{\times}10^{17}cm^{-3}$. In addition, the reduction of GaSb lattice parameter with Be doping was studied.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.527-533
• /
• 1990

Zone-melting recrystallization (ZMR) system using two graphite heaters(a stationary sheet and a narrow movable bar) was constructed and implemented in recrystallization op Si films on insulating layers. The recystallized Si films were examined by Nomarski contrast optical microscopy after Dash etching, transmission electron diffraction pattern, and x-ray diffraction. With optimum conditions of process parameters(input powers of the bottom and upper heater, scanning speed of the upper heater, and the gap between sample and upper heater), the recrystallized Si layer has a (100) texture, but contains many subboundaries. The subgrains are misoriented by < 0.5\ulcorner and the average spacing between subboundaries is about 25\ulcorner.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.5
• /
• pp.380-386
• /
• 1991

Hydrogen plasma-assisted epitaxial(PAE) growth of GaAs/Si and GaAs/Ge/Si with Ge buffer layer has been investigated. By means of photoluminescence, Nomarski microscopu, and $\alpha$-step, it could be known that GaAs on Si with Ge buffer layer has better crystalline quality than GaAs on Si without Ge buffer layer. The stoichiometry of GaAs layer on Si was confirmed by the depth profile of Auger electron spectroscope (AES). Also the native oxide(SiO$_2$) layer on Si substrate was plama-etched and the removal of the oxide layer was confirmed by AES. Photoluminescence peak wavelength of GaAs/Ge/Si with Ge buffer of 1\ulcorner thickness and GaAs growth rate of 160$\AA$/min was 8700$\AA$and FWHM was 12$\AA$.

• Korean Journal of Materials Research
• /
• v.6 no.6
• /
• pp.626-631
• /
• 1996

Reactive dc magnetron sputtering 법을 이용하여 증착한 molybdenum mitride 박막의 Cu 확산 방지막 특성을 조사하였다. Cu 확산 방지막으로서 molybdenum nitride 박막의 열적안정성을 관찰하기 위하여 molybdenum nitride 박막 위에 Cu를 evaporation 법으로 증착하고 진공 열처리하였다. Cu/r-Mo2N/si 구조는 $600^{\circ}C$, 30분간 열처리 시까지 안정하였다. 확산 방지막의 파괴는 $650^{\circ}C$, 30분간 열처리 시부터 격자 확산(lattice diffusion)이나 입계(grain boundary)과 결함(defect)을 통한 확산에 의해 나타나기 시작하였고, 이 때 molybdenum silicide과 copper silicide의 형성에 기인된 것으로 생각되었다. 열처리 이후 Cu/r-Mo2N/Si 사이의 상호반응이 증가하였다. 이는 Rutherford backscattering spectrometry, Auger electron spectroscopy 그리고 Nomarski microscopy 등의 분석을 통해 조사되었다.