• E2M - 전기 전자와 첨단 소재
• /
• 제10권10호
• /
• pp.1016-1021
• /
• 1997

Magneto resistance properties in spin-valve sandwiches with various thickness of nanmagnetic layer in contact with the ferromagnetic NiFe film were investigated. The NiFe layer in contact with the NiO film was pinned by strongly exchange-biased coupling and the free NiFe layer at the film surface induced a sharp change in the magnetoresistance at -5~15Oe due to small coercivity. The NiO/NiFe/Cu/NiFe film showed a magnetoresistance ratio in the range of 2.3~2.9% and a field sensitivity above 2.2%/Oe with various of nonmagnetic layer. The NiO/NiFe/Cu/NiFe film of the field sensitivity above 2.2%/Oe suggests stang possibility of magnetic sensor matter.

• Journal of Magnetics
• /
• 제6권3호
• /
• pp.83-85
• /
• 2001

The magnetoresistance properties of NiO/NiFe/Cu/NiFe spin valve film deposited on MgO(100) substrate with YBa$_2$$Cu_3O_7$(YBCO) film were investigated at room temperature and at 77 K. The magnetoresistance (MR) curves of the hybrid superconductor-magnetoresistor film structure showed an exchange coupling field of 300 Oe and an inverse magnetoresistance ratio of -6.5%. The magnetization configurations of the two magnetic layers in the NiO spin valve were antiparallel due to an increment in the conduction electron flow to superconductor YBCO film. This sample showed an inverse MR ratio.

• 한국전기전자재료학회논문지
• /
• 제16권2호
• /
• pp.138-143
• /
• 2003

A double spiral thin-film inductor with a NiFe magnetic core is integrated with DC-DC converter IC. The NiFe core is deposited on a polyimide film as the thinckness of NiFe is 2.5~3.5 ${\mu}$m. Then, copper conductor line is deposited on the NiFe core with double spiral structure. Process integration is performed by sequential processes of etching the polyimide film deposited both top and bottom of the NiFe core and electroplation copper conductor line from exposed metal pad of the DC-DC converter IC. Process integration is simplified by elimination planarization process for top core because the proposed thin-film inductor has a bottom NiFe core only. Inductor of the fabricated monolithic DC-DC converter IC is 0.53 ${\mu}$H when the area of converter IC and thin-film inductor are 5X5$\textrm{mm}^2$ and 3.5X2.5$\textrm{mm}^2$, respectively. The efficiency is 72% when input voltage and output voltage are 3.5 V and 6 V, respectively at the operation frequency of 8 MHz.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.366-366
• /
• 2010

Single crystalline Fe/NiO bilayers were epitaxially grown on Ag(001) and on MgO(001), and investigated by Low Energy Electron Diffraction (LEED), Magneto-Optic Kerr Effect (MOKE), and X-ray Magnetic Linear Dichorism (XMLD). We find that while the Fe film has an in-plane magnetization in both Fe/NiO/Ag(001) and Fe/NiO/MgO(001) systems, the NiO spins switch from out-of-plane direction in Fe/NiO/MgO(001) to in-plane direction in Fe/NiO/Ag(001). These two different NiO spin orientations generate remarkable different effects that the NiO induced magnetic anisotropy in the Fe film is much greater in Fe/NiO/Ag(001) than in Fe/NiO/MgO(001). XMLD measurement shows that the much greater magnetic anisotropy in Fe/NiO/Ag(001) is due to a 90o-coupling between the in-plane NiO spins and the in-plane Fe spins which causes a switching of the NiO spins during the Fe magnetization reversal.

• 한국자기학회지
• /
• 제15권5호
• /
• pp.265-269
• /
• 2005

강자성 공명 측정을 통하여 다양한 층 구성을 갖는 교환 바이어스 박막들의 교환 결합 특성에 대해 연구하였다. 공명자기장의 각도의존 실험을 통하여 일축방향이방성 자기장과 일축이방성 자기장을 구하여 분석하였다. NiFe 단일 박막과 비교하여 교환 바이어스된 NiFe/IrMn, IrMn/NiFe/IrMn, NiFe/IrMn/CoFe 박막들은 큰 일축방향이방성 자기장을 나타내었으며, 일축이방성 자기장 또한 큰 값을 나타내었다. 그러나 NiFe/Cu/IrMn의 경우, Cu의 두께가 두꺼울 때는 매우 작은 일축방향이방성 자기장을 나타내었으며, NiFe 단일 박막과 비슷한 크기의 일축이방성 자기장을 나타내었다. NiFe/IrMn/CoFe 박막의 경우 NiFe와 CoFe 강자성층들에 의해 두 개의 공명 자기장이 나타났다. 그 외에 공명 자기장의 선폭에 관한 분석이 교환 바이어스 특성과 연관하여 논의되어졌다.

• 한국자기학회지
• /
• 제11권4호
• /
• pp.163-167
• /
• 2001

DC 마그네트론 스퍼터링법으로 증착된 700 $\AA$의 NiFe 박막을 박막 증착시 형성시킨 자화용이축에 수직한 자기장을 인가하여 열처리한 후 일축 이방성 자기장의 회전을 조사하였다. NiFe 박막은 열처리온도 160 $^{\circ}C$에서 자화용이축과 자화곤란축을 구분할 수 없는 등방적인 상태가 되었고, 열처리온도가 증가함에 따라 다시 일축 이방성을 갖는 상태가 되었다. 열처리 온도가 400 $^{\circ}C$ 이상인 경우에 급격한 보자력의 증가를 보였다. 열처리 온도가 400 $^{\circ}C$인 경우에 XRD 분석과 AES depth profile은 NiFe 박막 내에서 (111) 방향으로 결정성장이 활발히 일어나며 인접한 전극 Au와 상호화산 현상도 광범위하게 일어남을 보여주었다.

• 한국표면공학회지
• /
• 제43권5호
• /
• pp.243-247
• /
• 2010

The micro Vickers hardness and internal stress of Ni-Fe metal thin film synthesized by electrodeposition method at $25^{\circ}C$ were studied as a function of bath composition, and surface microstructure and atomic compositions of thin films were investigated by SEM and EDS. And the shape change of $200\;{\AA}$ Ni-Fe nanowires made using anodic aluminum oxide(AAO) templates by electrodeposition method were observed by SEM as a function of ultrasonic treatment time and bath composition. The Fe deposition contents on the substrate non-linearly increased with Fe ion concentration over total metal ion concentration. In case of low Fe contents film, the grain size is smaller and denser than high Fe contents deposited films, and the micro Vickers hardness increased with Fe contents of electrodeposited films. These results affected the shape change of nanowire after ultrasonic treatments.

• 한국표면공학회지
• /
• 제44권4호
• /
• pp.137-143
• /
• 2011

The internal stress and magnetic properties (coercivity and squareness) of Ni-Fe nano thin film synthesized by electrodeposition method were studied as a function of acidic chloride bath conditions (composition and temperature) and current density. Fe deposition patterns were different depending on the temperature of the solution, the stress of film decreased with increasing the solution temperature, and the depending on the amount of Fe deposition showed a parabolic shape. The grain size of film was inversely proportional to stress of thin film. The internal stress of thin film and magnetic properties were deeply relevant, and the stress of thin film had a relationship with bath conditions and grain size of the thin film surface.

• 한국자기학회지
• /
• 제9권4호
• /
• pp.196-202
• /
• 1999

본 연구에서는 마그네트론 스퍼터링 법으로 제작한 Mn-Ir/Ni-Fe/Buffer/Si 다층막에서 다양한 하지층과 적층구조에 따른 교환이방성과 미세구조에 대하여 고찰하였다. Ni-Fe 위에 Mn-Ir을 증착한 Top 구조의 경우에서는 (111) 우선방위에 상관없이 165 Oe 이상의 높은 Hex 값을 얻을수 있었다. 또한 Mn-Ir/Ni-Fe 계면에서 grain-to-grain epitaxy가 발생함을 알 수 있었다. 따라서 Mn-Ir/Ni-Fe 다층박막의 Hex는 Mn-Ir/Ni-Fe 계면에서의 Mn-Ir의 결정립 크기와 grain-to-grain epitaxy에 의존하며 Hc는 Mn-Ir/Ni-Fe의 계면거칠기에 의존한다는 것을 알 수 있었다.

• 한국재료학회지
• /
• 제28권10호
• /
• pp.595-600
• /
• 2018

This study investigates the microstructural properties of CoCrFeMnNi high entropy alloy (HEA) oxynitride thin film. The HEA oxynitride thin film is grown by the magnetron sputtering method using nitrogen and oxygen gases. The grown CoCrFeMnNi HEA film shows a microstructure with nanocrystalline regions of 5~20 nm in the amorphous region, which is confirmed by high-resolution transmission electron microscopy (HR-TEM). From the TEM electron diffraction pattern analysis crystal structure is determined to be a face centered cubic (FCC) structure with a lattice constant of 0.491 nm, which is larger than that of CoCrFeMnNi HEA. The HEA oxynitride film shows a single phase in which constituting elements are distributed homogeneously as confirmed by element mapping using a Cs-corrected scanning TEM (STEM). Mechanical properties of the CoCrFeMnNi HEA oxynitride thin film are addressed by a nano indentation method, and a hardness of 8.13 GPa and a Young's modulus of 157.3 GPa are obtained. The observed high hardness value is thought to be the result of hardening due to the nanocrystalline microstructure.