• Journal of the Korea Computer Industry Society
• /
• v.9 no.2
• /
• pp.69-76
• /
• 2008

This paper implement an Camcorder NTSC camera autofocus control system on the DSP Board. The information of camera lens control obtain the only brightness simple image processing from the NTSC camcoder camera image. The exact focus makes the exact boundaries. The camera lens control that the increase sum of the useful ingredient values. Useful value obtained experiment value. Also noise is except because a big value of the ingredients so that obtained focus more accurate value.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.3
• /
• pp.129-136
• /
• 2008

This paper implement image gradient detection algorithm with high-performance DSP. First the NTSC color image convert to B/W image. The image gradient detect with Hough transform after edge detection image from the B/W images. The value of image gradient detection control the servo motor to original position of the NTSC camera if camera base to the left or right tilt.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.5
• /
• pp.459-465
• /
• 2000

In this paper, we propose a method for controlling camera focus in the short distance by analyzing NTSC signal of a CCD camera. When the distance between a camera and an object is less than about 1 meter, the existing CCD cameras with auto-focusing function are hard to acquire the proper images because they focus on the protruding minute parts ofthe object without taking into account the whole state of the object. To solve such a problem, we use an annealing algorithm to control the motor of a camera by analyzing the overall signal obtained from the camera. By doing so, we can acquire the adequate images at the near distance. The proposed method will be used for a personal identification system by human iris patterns.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.07a
• /
• pp.1-5
• /
• 1990

Still video camera (SVC)가 도입된 동기 및 특성을 소개하고 구성장치가운데서 SVC의 가장 특징적인 charge coupled device (CCD) 장치의 동작을 TV의 NTSC 방식과 관련해서 기술하였다. 현황 향후과제, 시장성 및 전망에 대해서도 조사하였다.

• The KIPS Transactions:PartD
• /
• v.10D no.6
• /
• pp.1041-1048
• /
• 2003

This paper implements a remote image based metering(IBM) system which capture meter image, recognizes number automatically, and send the data wirelessly through PCS data network. We use existing gas/water meter and get NTSC camera image by installing small monochrome CMOS camera on the meter closely. For remote data transfer, we use SMS (short message service) that is provided by commercial PCS network. We developed DVR(digital video recorder) for capturing meter image and character recognition algorithm. In addition, hardware and software for SMS and meter selector were developed.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.308-311
• /
• 2004

This paper describes design, implementation and functional test of on-board flight analog video system. Video system is the part of the telemetry system as a means of providing flight vehicle's image data. Adopting analog video transmission technique, we could design and test the system in a short time and implement the prototype model with simpler circuits. As results of the functional test, we have made the verification and validation of two cameras' switching in time, and frequency modulation and demodulation of NTSC color signals successfully.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.149-153
• /
• 2004

A Impulse denosing filter design of image for the faster processing time and system compatibility using DSP processor is presented on this paper The system hardware is composed of the stand-alone board with 32 bits DSP processor and vision board for image data acquisition with NTSC CCD camera, and the host computer controls them. The denoising method uses the adaptive median filter. The experiment result is that the system leads to denosing effect as 90% and PSNR 22㏈

• Journal of Intelligence and Information Systems
• /
• v.12 no.1
• /
• pp.33-41
• /
• 2006

This paper presents a method that automatically recognizes products into model type, which it flows with the conveyor belt. The specific interlaced image are occurred by moving image when we use the NTSC based camera. It is impossible to process interlaced images, so a suitable post-processing is required. For the purpose of this processing, after it remove interlaced images using de-interlacing method, it leads rectangle region of object by thresholding. And then, after rectangle region is separated into several blocks through edge detection, we calculate pixel numbers per each block, re-classify using its average, and classify products into model type. Through experiments, we know that the proposed method represent high classification ratio.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.2
• /
• pp.27-31
• /
• 2000

Thermal imaging system is implemented for the measurement and the analysis of the thermal distribution of the target objects. The main Part of the system is thermal camera in which a focal plane array typed sensor is introduced The sensor detects mid-range infrared spectrum or target objects and then it output generic video signal which should be processed to form a thermal image frame. A digital signal processor(DSP) in the system inputs analog to digital converted data. performs algorithms to improve the thermal images and then outputs the corrected frame data to frame buffers for NTSC encoding and for digital outputs.. To enhance the quality of the thermal images, two point correction method is applied. Figures indicate that the corrected thermal images are much improved.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.164-166
• /
• 1995

The objectives of study are to develop a peripheral device on the endoscopic surgery system. These systems are consist of the following units. They are a color monitor of high resolution, light source, computer system and endoscopic camera with a C-mount head, irrigator, color video printer, Super VHS recorder and a system rack. The color monitor is a NTSC monitor for monitoring the image projected of the surgical section. The lightsource is necessary to irradiate the interior of a body via an optic fiber, The light projector will adapt the brightness in accordance with changing distance from the object. A miniature camera using a color CCD chip and computer system is used to capture and control an image of the surgical section[1]. The video printer is a 300 DPI resolution using thermal sublimation methods, which is developed by Samsung Electronics Co., Ltd. The specification of the endoscopic data management system is consist of storage of a captured image and pathological database of patients [2-4].