• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.253-260
• /
• 2000

Pile foundations have been widely used in civil engineering construction for many years. Structures subjected to large lateral loads usually have pile foundations as shallow foundations cannot sometimes support the moments on these structure. The purpose of this paper is to propose the p - multiplier factor (P$\sub$M/) based on the characteristics of behavior of laterally loaded group pile in homogeneous sand. For this, a series of model tests are performed and the composite analytical method proposed by author is used to the propose P$\sub$M/. Based on the model test results of the large number of laterally loaded group piles, p - multiplier factors for homogeneous sand are proposed by back analysis under various condition of soil density, spacing-to-diameter ratio of pile, number of pile, and spacing-to-diameter of pile. P - multiplier approach provides a simple but sufficient tool for characterizing the shadowing group effects of laterally loaded group pile.

• 전기의세계
• /
• 제14권2호
• /
• pp.14-24
• /
• 1965

The characteristics of servo-multipliers and its accuracies are analyzed. From the analysis a low cost high accuracy four quadrant servo-multiplier with first derivative output feedback is built. The multiplier servomechanism has a second order system response with a damping ratio of 0.8 and computing bandwidth of 4 cycles per second, and its tracking accuracy at low speed of 0.5 volt per second is 0.9 per cent of maximum output voltage and static accuracy is better than 0.6 per cent. Method of testing this multiplier and the results are also described. The test on the characteristics of the multiplier shows that the results agree with theoretical values satisfactorily, and justifies the use of the servo-multiplier for slow type analog computers.

• 한국통신학회논문지
• /
• 제15권7호
• /
• pp.628-637
• /
• 1990

본 연구에서는 고속의 병렬 알고리즘을 이용하여 실시간 디지털 신호를 처리할 수 있는 16x16 고속의 CMOS 승산기를 설계하였다. 설계된 병렬 승산기는 modified Booth's 알고리즘과 Ling's approach를 이용하여 4열의 가산기와 8개의 Booth 디코더로 구성하였으며, 2's complement의 데이터와 계수를 처리할 수 있도록 설계하였다. 또한 VLSI 구현에 적합하도록 modulrity하고 regularity하게 모든 회로를 설계하고 규칙적으로 내부 배열을하여 testavility가 용이하도록 설계하였다.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.85-88
• /
• 2017

In this paper, we have designed and fabricated a RF-DC voltage multiplier for 5.8GHz microwave wireless power transmission. In order to obtain higher voltage, the RF-DC voltage multiplier with 10 diodes (D-10) and the receiver module with an antenna and BPF (Band Pass Filter) was manufactured. The measured and compared results show that the voltages of the proposed one are lower than those of the previous tripler module up to 40cm. However, the voltage of the proposed one with the voltage multiplier is higher than that of the tripler module at the distances of 45cm and 50cm due to the voltage multiplier with 10 diodes.

• ETRI Journal
• /
• 제43권4호
• /
• pp.717-727
• /
• 2021

In this study, new multiplier and adder method designs with multiplexers are proposed. The designs are based on quaternary logic and a carbon nanotube field-effect transistor (CNTFET). The design utilizes 4 × 4 multiplier blocks. Applying specific rotational functions and unary operators to the quaternary logic reduced the power delay produced (PDP) circuit by 54% and 17.5% in the CNTFETs used in the adder block and by 98.4% and 43.62% in the transistors in the multiplier block, respectively. The proposed 4 × 4 multiplier also reduced the occupied area by 66.05% and increased the speed circuit by 55.59%. The proposed designs are simulated using HSPICE software and 32 nm technology in the Stanford Compact SPICE model for CNTFETs. The simulated results display a significant improvement in the fabrication, average power consumption, speed, and PDP compared to the current bestperforming techniques in the literature. The proposed operators and circuits are evaluated under various operating conditions, and the results demonstrate the stability of the proposed circuits.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2004년도 제3회 정기총회 및 추계학술대회
• /
• pp.212-215
• /
• 2004

• 대한전자공학회논문지SD
• /
• 제41권11호
• /
• pp.123-130
• /
• 2004

본 논문에서는 32비트 3단 파이프라인을 가진 RISC 프로세서에 최적화된 곱셈기 구조의 연구에 대해 다룬다. 대상 프로세서인 ARM7은 3단의 파이프라인 구조로 되어 있으며 이 프로세서의 곱셈기는 파이프라인 상의 실행 단계에서 최대 7사이클이 소요된다. 내장된 곱셈기는 기능적으로 부스 알고리즘을 적용하여 32×32 곱셈 연산과 덧셈 연산을 하여 64비트 결과를 낼 수 있는 MAC(Multiplier-Accumulator) 구조로 되어 있으며 6가지 세부 명령어를 실행할 수 있다. ARM7의 파이프라인 및 ALU와 shifter 구조에 적합한 radix4-32×8 및 radix4-32×16 과 radix8-32×32의 곱셈기 구조를 비교 분석하였으며 면적, 사이클 지연시간, 수행 사이클 수를 성능 기준으로 최적화된 곱셈기를 결정하여 설계하였다. 프로세서 코어에 내장된 곱셈기의 동작을 검증하기 위해 다양한 오디오 알고리즘을 이용하여 시뮬레이션을 수행하였다.

• 한국정보통신학회논문지
• /
• 제6권2호
• /
• pp.323-329
• /
• 2002

N-비트$\times$N-비트 2의 보수 승산에서 승산결과 2N-비트만을 출력하는 절사형 Booth 승산기의 절사오차 최소화를 위한 효율적인 오차보상 방법을 제안하였다. 제안된 방법을 적용하여 작은 칩 면적과 저전력 특성을 갖는 절사형 승산기를 설계하고 면적, 절사오차 등을 기존의 방식과 비교하였다. 제안된 절사형 Booth 승산기는 승산결과의 하위 N-비트를 계산하는 회로를 생략하므로, 절사되지 않은 일반 승산기에 비해 게이트 수가 약 35% 정도 감소한다. 본 논문에서 설계된 절사형 Booth 승산기는 기존의 고정 오차보상 방법을 적용한 경우에 비해 평균오차를 약 60% 정도 줄일 수 있다. 제안된 방법을 적용하여 16-비트$\times$16-비트 절사형 승산기를 0.35-$\mu\textrm{m}$ CMOS 공정을 이용하여 full-custom 방식으로 설계하였다. 약 3.000개의 트랜지스터로 구성되는 승산기 코어는 330-$\mu\textrm{m}$$\times$262-$\mu\textrm{m}$의 면적을 가지며, 3.3-V 전원전압에서 200-MHz로 동작 가능하며 약 20-㎽의 전력소모 특성을 갖는다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권1호
• /
• pp.17-28
• /
• 2024

As listed as one of the most important requirements for Post-Quantum Cryptography standardization process by National Institute of Standards and Technology, the resistance to various side-channel attacks is considered very critical in deploying cryptosystems in practice. In fact, cryptosystems can easily be broken by side-channel attacks, even though they are considered to be secure in the mathematical point of view. The timing attack(TA) and the simple power analysis attack(SPA) are such side-channel attack methods which can reveal sensitive information by analyzing the timing behavior or the power consumption pattern of cryptographic operations. Thus, appropriate measures against such attacks must carefully be considered in the early stage of cryptosystem's implementation process. The Montgomery multiplier is a commonly used and classical gadget in implementing big-number-based cryptosystems including RSA and ECC. And, as recently proposed as an alternative of building blocks for implementing post quantum cryptography such as lattice-based cryptography, the big-number multiplier including the Montgomery multiplier still plays a role in modern cryptography. However, in spite of its effectiveness and wide-adoption, the multiplier is known to be vulnerable to TA and SPA. And this paper proposes a new countermeasure for the Montgomery multiplier against TA and SPA. Briefly speaking, the new measure first represents a multiplication operand without 0 digits, so the resulting multiplication operation behaves in a very regular manner. Also, the new algorithm removes the extra final reduction (which is intrinsic to the modular multiplication) to make the resulting multiplier more timing-independent. Consequently, the resulting multiplier operates in constant time so that it totally removes any TA and SPA vulnerabilities. Since the proposed method can process multi bits at a time, implementers can also trade-off the performance with the resource usage to get desirable implementation characteristics.

• ETRI Journal
• /
• 제39권4호
• /
• pp.570-581
• /
• 2017

Multiplication in finite fields is used in many applications, especially in cryptography. It is a basic and the most computationally intensive operation from among all such operations. Several systolic multipliers are proposed in the literature that offer low hardware complexity or high speed. In this paper, a bit-parallel polynomial basis systolic multiplier for generic irreducible polynomials is proposed based on a modified interleaved multiplication method. The hardware complexity and delay of the proposed multiplier are estimated, and a comparison with the corresponding multipliers available in the literature is presented. Of the corresponding multipliers, the proposed multiplier achieves a reduction in the hardware complexity of up to 20% when compared to the best multiplier for m = 163. The synthesis results of application-specific integrated circuit and field-programmable gate array implementations of the proposed multiplier are also presented. From the synthesis results, it is inferred that the proposed multiplier achieves low power consumption and low area complexitywhen compared to the best of the corresponding multipliers.