• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.451-454
• /
• 2006

Fiber optic distributed temperature sensing and thermal line sensor are applied in an observation borehole and a loom deep borehole heat exchanger. For the case of permanently installed system fiber optic DTS is very useful. By comparing with TLS, fiber optic DTS shows good accuracy and reliability. Ground water flow can give influences at heat exchange rate of the heat pump system. According to the hydraulic characteristics and temperature-depth profile, we consider that temperature-depth profile do not seem to be dependent on ground water flow. A permanent installation of fiber optic cable is expected as a reliable temperature measurement technique in a borehole heat exchanger system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.421-424
• /
• 2000

This paper investigates the characteristics of analytical models in prediction of sound transmission loss for the multi-layered panels with high density mineral wools. The results show that the sandwich model is more adequate to account for sound insulation performance of those panels than the poro-elastic model. In order to improve STC(Sound Transmission Class), the effect of fiber directions of mineral wools is examined, analytically and experimentally. From the comparison of the measurements with the predictions, it is evident that the vertical fiber directions of mineral wools enhance STC value up to 6 dB, compared to that of the horizontal fiber directions.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.902-910
• /
• 2018

In recent times, development of nanofluid insulation for power transformers is a hot research topic. Many researchers reported the enhancement in dielectric characteristics of nano modified mineral oils. Considering the drawbacks of petroleum based mineral oil, it is necessary to understand the dielectric characteristics of nanofluids developed with natural ester based oils. Palm oil has better insulation characteristics comparable to mineral oil. However very few research reports is available in the area of nanofluids based on palm oil. Partial discharge (PD) is one of the major sources of insulation performance degradation of transformer oil. It is essential to understand the partial discharge(PD) characteristics by collecting huge data base of PD performance of nano modified palm oil which will increase its confidence level for power transformer application. Knowing these facts, in the present work, certain laboratory experiments have been performed on PD characteristics of nano $SiO_2$ modified palm oil at different electrode configurations. Influence of concentration of nano filler material on the PD characteristics is also studied. Partial discharge inception voltage, Phase resolved partial discharge (PRPD) pattern, PD signal time-frequency domain characteristics, PD signal equivalent timelength-bandwidth mapping, Weibull distribution statistical parameters of PRPD pattern, skewness, repetition rate and phase angle variations are evaluated at different test conditions. From the results of the experiments conducted, we came to understand that PD performance of palm oil is considerably enhanced with the addition of $nano-SiO_2$ filler at 0.01%wt and 0.05%wt concentration. Significant reduction in PD inception voltage, repetition rate, Weibull shape parameter and PD magnitude are noticed with addition of $SiO_2$ nanofillers in palm oil. These results will be useful for recommending nano modified palm oil for power transformer applications.

• 광물과산업
• /
• 제26권
• /
• pp.22-31
• /
• 2013

한국지질자원연구원과 몽골 광물자원청은 몽골 항가이 희유금속 광화대 내 둘란하이한 W-Mo 산출지에 대해 공동조사를 하였다. 몽골 항가이 희유금속 광화대 둘란하이한 W-Mo 산출지에 대한 지질광상 조사결과 텅스텐 함량이 높은 광화점들을 발견하였고 텅스텐 광석 광물은 철망간중석, 철중석, 망간중석으로 분석되었다. 실루리아기 호톤트 층의 규암에서 채취한 시료의 텅스텐($WO_3$) 함량이 0.11-4.43%로 분석되었고, 페름기 델거한 복합체의 페그마타이트에서 채취한 시료의 텅스텐 함량이 137-3844ppm으로 분석되었다. 조사지역에서 채취한 시료들의 전체 $R_2O_3$의 평균값은 473ppm으로 지각의 평균 함량인 200ppm에 비해 약 2.5 배 정도 되는 값을 가지며 가장 높은 시료는 1326ppm으로 약 6.5 배 정도 되는 값을 갖는 것으로 분석되었다. 요인분석 결과에 따르면 둘란하이한 지역 내 텅스텐 함량이 높은 두 지역의 광화 작용은 상관관계의 유사성을 보이며 따라서 유사한 기원을 갖는 것으로 판단된다.

• Geosciences Journal
• /
• 제22권6호
• /
• pp.921-938
• /
• 2018

The Motzfeldt intrusions in the Gardar Province, southern Greenland, split into syenitic plutonic and hypabyssal rocks, in which the latter include ring dykes and sheet intrusions. Sheet intrusions, considered as the source for rare earth elements (REE) and high field strength elements (HFSE), comprise sheets of peralkaline microsyenite (SPM), syenitic pegmatite (SP), and peralkaline microsyenite (PM). SP exhibits extremely high concentrations of REE and HFSE, which are positively correlated with increasing alkalinity from early towards late intrusion, caused by magmatic processes. In contrast, some of the SPM and PM are also significantly enriched in REE and HFSE, caused by post-magmatic fluids. The REE- and HFSE-rich phases in SP consist mainly of zircon and allanite with smaller amounts of pyrochlore in pseudomorph from the inferred eudialyte, whereas some of the PM and SPM consist of pyrochlore, REE-carbonate, and zircon in the matrix. The zircon grains in the Motzfeldt Sø Formation (MSF) syenite occur in interstitial spaces, exhibiting an association with magnetite and a bipyramidal form in texture. They are characterized by a highly fractured and embayed rim. Zircons from PM and SP are clearly enriched in Fe, Al, Ca, Na, Y, P, Hf, Y, P, Nb, Ta, and REE, and are depleted in Zr and Si in comparison with magmatic zircon. They also show a clear trend of higher LREE/HREE and $Eu/Eu^{\star}$ ratios, and lower $Ce/Ce^{\star}$ ratios, which define them as typical hydrothermal zircons. In contrast, zircons from the MSF syenite show a relatively lower LREE/HREE ratio and Eu and Ce anomalies of a similar magnitude compared with those from SP and PM. The occurrence and mineral composition of the zircon suggest that post-magmatic fluids have played an important role in the remobilization of REE and HFSE as well as the primary concentration of REE and HFSE, caused by magmatic processes.

• 지질공학
• /
• 제17권1호
• /
• pp.75-87
• /
• 2007

자연사면에서의 산사태를 평가함에 있어 발생양상과 기하특성을 파악하는 것은 매우 중요하다. 이 연구는 지질을 달리하는 3개지역(장흥, 편마암류; 상주, 화강암류; 포항, 제3기 퇴적암류)에서 발생한 산사태를 대상으로 지질조건에 따른 산사태의 기하양상을 분석하였다. 3개지역에서는 1998년 여름에 $150{\sim}588mm$의 집중호우로 인해 총 1,582개의 산사태가 발생하였다. 이들 산사태를 조사하여 지질조건별 기하특성을 분석하였다. 산사태는 90% 이상의 사면고도에서 발생빈도가 가장 높고 70% 미만의 고도에서는 매우 낮다. 사면경사는 $26{\sim}30^{\circ}$ 범위에서 가장 많이 발생하였고 $20^{\circ}$ 미만에서는 발생빈도가 매우 낮으며 이러한 양상은 지질별로 거의 유사한 경향성을 보였다. 규모는 부피로 보아 수십부터 수백을 넘는 경우도 있으며, 그 길이는 $5{\sim}300m$, 폭은 $3{\sim}50m$로서 좁고 긴 형태이고 깊이는 대부분 1 m 이내로서 매우 얕은 특징을 보였다. 그리고 유형은 기반암의 표면을 파괴면으로 하여 그 상부에 위치한 토층이 미끄러지는 전이형 슬라이드가 주를 이루며, 토석류로 이뤄진 사태물질이 하부사면과 계곡부로 이동되면서 유동성산사태로 변화되는 양상을 보였다.

• 한국분말재료학회지
• /
• 제15권3호
• /
• pp.221-226
• /
• 2008

Silver coated copper composite powders were prepared by electroless plating method by controlling the activation and deposition process variables such as feeding rate of silver ions solution, concentration of reductant and molar ratio of activation solution $(NH_4OH/(NH_4)_2SO_4)$ at room temperature. The characteristics of the product were verified by using a scanning electron microscopy (SEM), X-ray diffraction (XRD) and atomic absorption (A.A.). It is noted that completely cleansing the copper oxide layers and protecting the copper particles surface from hydrolysis were important to obtain high quality Ag-Cu composite powders. The optimum conditions of Ag-Cu composite powder synthesis were $NH_4OH/(NH_4)_2SO_4$ molar ratio 4, concentration of reductant 15g/l and feeding rate of silver ions solution 2 ml/min.

• Nutrition Research and Practice
• /
• 제1권1호
• /
• pp.70-73
• /
• 2007

This study was conducted to determine the nutritional characteristics of horsemeat and bone meal in comparison with those of beef and pork presented by Dietary Reference Intakes For Koreans. Longissimus muscle and large metacarpal bone samples were collected from 20 fattened Jeju horses. Muscle samples were subjected to proximate analysis, assays for fatty acid profile and minerals, and bone samples to mineral assays. Horsemeal had similar levels of protein (21.1 vs 21.0 or 21.1%) and lower levels of fat (6.0 vs 14.1 or 16.1%) compared with beef or pork, respectively. Horsemeat had much higher levels of palmitoleic (8.2 vs 4.4 or 3.3%) and $\alpha-linolenic$ (1.4 vs 0.1 or 0.6%) acids than beef or pork, respectively. Linoleic acid was much higher in horsemeat (11.1%) and pork (10.1%) than in beef (1.6%). PUFA:SFA and n-6:n-3 ratios in horsemeat were 0.29 and 10.2, respectively. There were no big differences in mineral contents between horsemeat, beef and pork. For daily recommended mineral intakes of male adults (Dietary Reference Intakes For Koreans), phosphorus, sodium, potassium, iron, zinc and copper can be provided up to 24, 2.5, 6.7, 21, 26 and 40%, respectively, by 100 g raw horsemeat, but calcium and manganese levels are negligible. Horse cannon bone had much higher mineral contents especially in calcium (10,193 mg/100 g), phosphorus (5,874 mg/100 g) and copper (0.79 mg/100 g). Thiamin, riboflavin, niacin and retinol contents were 0.20, 0.21, 1.65 mg/100 g and $30{\mu}g/100g$, respectively. But ascorbic acid and beta-carotene were not detected. Our data demonstrated that higher levels of palmitoleic and $\alpha-linolenic$ acid in horsemeat than in beef and pork may be beneficial for human health. Horsemeat and bone meal are a good source of some minerals and vitamins.

• Ocean and Polar Research
• /
• 제36권4호
• /
• pp.423-435
• /
• 2014

Verifying the similarity of environmental characteristics between an artificial impact site and a preserved or reference site is necessary to quantitatively and qualitatively evaluate the environmental impact of mining activity. Although an impact site (BIS station) and a preserved site (called KOMO station) that have been selected in the Korea manganese nodule contract area may share similar environmental characteristics, similarities in terms of the water column environment between both sites has not been investigated. In this study, we compared the chemical properties of the water columns and sinking particle fluxes between BIS and KOMO stations through two observations (August 2011 and September 2012). Additionally, we observed particle fluxes at the KOMO station for five years (July 2003~July 2008) to understand long-term natural variability. Vertical distributions of water column properties such as dissolved oxygen, inorganic nutrients (N, P, Si), total organic carbon below surface layer (within the depth range of 200 m) were not considerably different between the two sites. Especially, values of water column parameters in the abyssopelagic zone from 4000 m to bottom layer (~5000 m) were very similar between the BIS and KOMO sites. Sinking particle fluxes from the two sites also showed similar seasonality. However, natural variation of particle flux at the KOMO site varied from 3.5 to $129.9mg\;m^{-2}day^{-1}$, with a distinct temporal variation originating from ENSO events (almost forty times higher than a minimum value). These results could provide valuable information to more exactly evaluate the environmental impact of mining activity on water columns.

• Geomechanics and Engineering
• /
• 제14권1호
• /
• pp.9-17
• /
• 2018

Brazilian splitting tests, uniaxial compression tests and triaxial compression tests are carried out on the coal samples cored from Shanxi group $II_1$ coal seam of Jiaozuo coal mine, Henan province, China, to obtain their property parameters. Considering the bedding has notable effect on the property parameter of coal, the samples with different bedding angles are prepared. The effects of bedding on the anisotropic characteristics of the coal seam are investigated. A geological geomechanical model is built based on the geology characteristics of the Jiaozuo coal mine target reservoir to study the effects of bedding on the fracture propagations during hydraulic fracturing. The effects of injection pressure, well completion method, in-situ stress difference coefficient, and fracturing fluid displacement on the fracture propagations are investigated. Results show bedding has notable effects on the property parameters of coal, which is the key factor affecting the anisotropy of coal. The hydraulic cracks trends to bifurcate and swerve at the bedding due to its low strength. Induced fractures are produced easily at the locations around the bedding. The bedding is beneficial to form a complicated fracture network. Experimental and numerical simulations can help to understand the effects of bedding on hydraulic fracturing in coalbed methane reservoirs.