• ETRI Journal
• /
• 제38권4호
• /
• pp.645-653
• /
• 2016

This paper demonstrates the performance of a metal-substrate power module with multiple fabricated chips for a high current electrical application, and evaluates the proposed module using a 1.5-kW sinusoidal brushless direct current (BLDC) motor. Specifically, the power module has a hybrid structure employing a single-layer heat-sink extensible metal board (Al board). A fabricated motor driver IC and trench gate DMOSFET (TDMOSFET) are implemented on the Al board, and the proper heat-sink size was designed under the operating conditions. The fabricated motor driver IC mainly operates as a speed controller under various load conditions, and as a multi-phase gate driver using an N-ch silicon MOSFET high-side drive scheme. A fabricated power TDMOSFET is also included in the fabricated power module for three-phase inverter operation. Using this proposed module, a BLDC motor is operated and evaluated under various pulse load tests, and our module is compared with a commercial MOSFET module in terms of the system efficiency and input current.

• Transactions on Electrical and Electronic Materials
• /
• 제12권1호
• /
• pp.35-39
• /
• 2011

An electrically erasable programmable read-only memory (EEPROM) containing a stacked metal-insulator-metal (MIM) and n-well capacitor is proposed. It was fabricated using a 0.18 $\mu$m standard complementary metal-oxide semiconductor process. The depletion capacitance of the n-well region was effectively applied without sacrificing the cell-area and control gate coupling ratio. The device performed very similarly to the MIM capacitor cell regardless of the smaller cell area. This is attributed to the high control gate coupling ratio and capacitance. The erase speed of the proposed EEPROM was faster than that of the cell containing the MIM control gate.

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.120-124
• /
• 2005

In this work, MOS capacitors were used to study the electrical properties of Mo gate electrode deposited on ZrO$_2$. The workfunctions of Mo gate extracted from C-V curves were appropriate for PMOS. Thermal stability of Mo metal was investigated by analyzing the variations of workfunction and EOT(effective oxide thickness) after 600, 700, and 800 $^{\circ}C$ RTA(rapid thermal annealing). It was found that Mo gate was stable up to 800 $^{\circ}C$ with underlying ZrO$_2$. The resistivities of Mo were 35$\mu$Ω$.$cm∼ 75$\mu$Ω$.$cm. These values are lower than those of heavily doped polysilicon. Based on these measurements, it can be concluded that Mo metal gate with ZrO$_2$ gate insulator is an excellent gate material for PMOS.

• 센서학회지
• /
• 제25권5호
• /
• pp.320-325
• /
• 2016

In this paper, we propose an AlGaN/GaN-based extended-gate metal-insulator-semiconductor high electron mobility transistor (MISHEMT)-type biosensor for detecting streptavidin-biotin complexes. We measure the drain current of the fabricated sensor, which varies depending on the antibody-antigen reaction of streptavidin with biotin molecules. To confirm the immobilization of biotin polyethylene glycol (PEG) thiol, we analyze the Au surface of a GaN sample using X-ray photoelectron spectroscopy (XPS). The proposed biosensor shows higher sensitivity than Si-based extended-gate metal oxide semiconductor field effect transistor (MOSFET)-type biosensor. In addition, the proposed AlGaN/GaN-based extended-gate MISHEMT-type biosensor exhibits better long-term stability, compared to the conventional AlGaN/GaN-based MISHEMT-type biosensor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.97-98
• /
• 2006

High current behaviors of the grounded gate extended drain N-type metal-oxide-semiconductor field effects transistor (GG_EDNMOS) electro-static discharge (ESD) protection devices are analyzed. Simulation based contour analyses reveal that combination of BJT operation and deep electron channeling induced by high electron injection gives rise to the 2-nd on-state. Thus, the deep electron channel formation needs to be prevented in order to realize stable and robust ESD protection performance. Based on our analyses, general methodology to avoid the double snapback and to realize stable ESD protection is to be discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.358-361
• /
• 2002

Self-aligned MOSFETS using a polysilicon gate are widely fabricated in silicon technology. The polysilicon layer acts as a mask for the source and drain implants and does as gate electrode in the final product. However, the usage of polysilicon gate as a self-aligned mask is restricted in fabricating SiC MOSFETS since the following processes such as dopant activation, ohmic contacts are done at the very high temperature to attack the stability of the polysilicon layer. A metal instead of polysilicon can be used as a gate material and even can be used for ohmic contact to source region of SiC MOSFETS, which may reduce the number of the fabrication processes. Co-formation process of metal-source/drain ohmic contact and gate has been examined in the 4H-SiC based vertical power MOSFET At low bias region (<20V), increment of leakage current after RTA was detected. However, the amount of leakage current increment was less than a few tens of ph. The interface trap densities calculated from high-low frequency C-V curves do not show any difference between w/ RTA and w/o RTA. From the C-V characteristic curves, equivalent oxide thickness was calculated. The calculated thickness was 55 and 62nm for w/o RTA and w/ RTA, respectively. During the annealing, oxidation and silicidation of Ni can be occurred. Even though refractory nature of Ni, 950$^{\circ}C$ is high enough to oxidize it. Ni reacts with silicon and oxygen from SiO$_2$ 1ayer and form Ni-silicide and Ni-oxide, respectively. These extra layers result in the change of capacitance of whole oxide layer and the leakage current

• Transactions on Electrical and Electronic Materials
• /
• 제12권1호
• /
• pp.7-10
• /
• 2011

High voltage (HV) integrated circuits are viable alternatives to discrete circuits in a wide variety of applications. A HV device generally used in these circuits is a lateral double diffused metal oxide semiconductor (LDMOS) transistor. Attempts to model LDMOS devices are complicated by the existence of the lightly doped drain and by the extension of the poly-silicon and the gate oxide. Several physically based investigations of the bias-dependent drift resistance of HV devices have been conducted, but a complete physical model has not been reported. We propose a new technique to model HV devices using both the BSIM3 SPICE model and a bias dependent resistor model (sub-circuit macro model).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.157-159
• /
• 2005

MOS capacitors were fabricated to study electrical and chemical properties of Ta-Mo metal alloy with $ZrO_2$. The work function of Ta-Mo alloy were varied from 4.1eV to 5.1eV by controlling the composition. When the atomic composition of Mo is 10%, good thermal stability up to $800^{\circ}C$ was observed and work function of MOS capacitor was 4.1eV, compatible for NMOS application. But pure Ta exhibited very poor thermal stability. After $600^{\circ}C$ annealing, equivalent oxide thickness of tantalum gate MOS capacitor was continuously decreased. Barrier heights of Ta-Mo alloy and pure metal that supported the work function values were calculated from Fowler-Nordheim analysis. As a result of these electrical?experiments, Ta-Mo metal alloy with $ZrO_2$ is excellent gate electrode for NMOS.

• 한국전기전자재료학회논문지
• /
• 제28권11호
• /
• pp.698-703
• /
• 2015

In this study, we fabricated the dual gate (DG) ion-sensitive field-effect-transistor (ISFET) with flexible polyimide (PI) extended gate (EG). The DG ISFETs significantly enhanced the sensitivity of pH in electrolytes from 60 mV/pH to 1152.17 mV/pH and effectively improved the drift and hysteresis phenomenon. This is attributed to the capacitive coupling effect between top gate and bottom gate insulators of the channel in silicon-on-transistor (SOI) metal-oxide-semiconductor (MOS) FETs. Accordingly, it is expected that the PI-EG based DG-ISFETs is promising technology for high-performance flexible biosensor applications.

• 세라미스트
• /
• 제9권4호
• /
• pp.58-71
• /
• 2006

Scaling of the gate stack has been one of the major contributors to the performance enhancement of CMOSFET devices in past technology generations. The scalability of gate stack has diminished in recent years and alternative gate stack technology such as metal electrode and high-k dielectrics has been intensively studied during the last decade. Tody the performance of high-k dielectrics almost matches that of conventional $SiO_2-based$ gate dielectrics. However, many technical challenges remain to be resolved before alternative gate stacks can be introduced into mainstream technology. This paper reviews the research in alternative gate stack technologies to provide insights for future research.