• 정보통신설비학회논문지
• /
• 제11권1호
• /
• pp.10-15
• /
• 2012

Ultra wideband (UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geo-location, and other applications. The energy of UWB signal is extremely spread from near DC (Direct Current) to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional wireless systems sharing the frequency bands such as broadcasting system. This paper experimentally evaluates the interference from two kinds of UWB sources, namely an orthogonal frequency division multiplex UWB source and an impulse radio UWB source, to a broadcasting transmission system. The S/N ratio degradation of broadcasting system is presented. From these experimental results, we show that in all practical cases UWB system can be coexisted 35m distance in-band broadcasting network.

• 융합신호처리학회논문지
• /
• 제4권2호
• /
• pp.61-69
• /
• 2003

본 논문에서는 반도체 소자의 DC 파라메터에 대한 특성을 검사하는 DC 파라메터 검사 시스템을 개발하였다. 개발된 시스템은 IBM-PC와 연결하기 위한 CPLD(Complex Programmable Logic Device)로 구현된 연결부와 ADC/DAC부, 전압원/전류원, 가변저항부, 측정부로 구성되어 있다. 제안된 시스템에서 정전압원과 정전류원은 하나의 회로로 설계하여 외부의 컴퓨터에서 주어지는 모드명령에 의해 선택되도록 하였으며, VHDL(VHSIC Hardware Description Language)을 사용하여 회로를 제어하고 신호를 변환하는 기능을 CPLD로 설계하였다. 제안된 시스템은 두 개의 채널을 가지고 있으며, VFCS(Voltage Force Current Sensing) 모드와 CFVS(Current Force Voltage Sensing) 모드로 동작할 수 있도록 하였다. 검사 전압의 범위는 0(V)-10(V)까지이고, 검사전류의 범위는 0[mA]-100[mA]까지로 다이오드를 사용하여 설계된 회로의 성능을 검증하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제2권1호
• /
• pp.16-21
• /
• 2001

A new technique to measure low level capacitance variations of a gyroscope is proposed. It is based on the improved CVC(capacitance to voltage converter) biased by a d.c. current source and the peak detector without any low pass filter. This setup of the measurement system makes it possible to provide higher speed of measurement and wide operation range. The d,c, drift of the conventional CVC and stray capacitances are automatically compensated. Key parameters that affect the performance of the measurement system are illustrated and computer simulation results are presented. The demonstrated measurement system for micromachined gyroscope applications shows a linearity of 0.99972 and a resolution of 0.67fF from 10 fF to 120 fF at 10 kHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.864-867
• /
• 2003

Since the development of semiconductors, various related research has been conducted. During research, silicon diodes have been commonly used because of their simplicity and low cost in the manufacturing process. This research deals with p-n junction threshold voltages from silicon diodes due to transport current at a cryogenic temperature. At a cryogenic temperature(77K) we could get minimum current which junction threshold voltage becomes constant. This is experimented on GPIB communication and it consist of programmable current source, multimeter which gauge the threshold voltage in a very low temperature caused by transport current from 5nA to 1mA and $LN_2$(77K) for coolant. This experiment is programmed all process using Measurement studio(Lab window) tool.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권10호
• /
• pp.687-692
• /
• 1999

A new technique to measure low level capacitance variations of the gyroscope is proposed and verified by computer simulation. It is based on the new CV(capacitance-voltage) converter circuit biased by dc current source and the peak detector without low pass filter. The CV converter biased by dc current source provides good signal-to-noise ratio and this setup of the detection circuitry without low pass filter makes it possible to provide short settling time, that is, higher speed of measurement and wide operation range if only a few parameters are adjusted. The key parameters that affect the performance of the detection circuitry are illustrated and computer simulation results are presented. The demonstrated detection circuitry shows linear response from 10 fF to 130 fF at 10 kHz and shows good linearity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.58-60
• /
• 1998

The precise measurement of consumed power during the given time is very important in the energy management aspect. Up to days, induction watthour meter has been designed for use in the alternating circuits in which the voltage and current are essentially sinusoidal. The use of switching elements in power system causes the current or voltage involving harmonics. Therefore the registration error is caused by harmonics in the equipment for measuring power. This paper presents the registration error of the induction watthour meter in the presence of harmonic distortion. The accuracy of a watthour meter on loads in which the input source is not sinusoidal is investigated. And the effects of individual harmonic are reported by experiment.

• 영어어문교육
• /
• 제12권1호
• /
• pp.221-238
• /
• 2006

This study investigates the reliability of plagiarism measurement in the ESL essay writing context. The current study aims to address the answers to the following research questions: 1) How does plagiarism measurement affect test reliability in a psychometric view? and 2) how do raters conceive the plagiarism in their analytic scoring? This study uses the mixed-methodology that crosses quantitative-qualitative techniques. Thirty eight international students took an ESL placement writing test offered by the University of Illinois. Two native expert raters rated students' essays in terms of 5 analytic features (organization, content, language use, source use, plagiarism) and made a holistic score using a scoring benchmark. For research question 1, the current study, using G-theory and Multi-facet Rasch model, found that plagiarism measurement threatened test reliability. For research question 2, two native raters and one non-native rater in their email correspondences responded that plagiarism was not a valid analytic area to be measured in a large-scale writing test. They viewed the plagiarism as a difficult measurement are. In conclusion, this study proposes that a systematic training program for avoiding plagiarism should be given to students. In addition, this study suggested that plagiarism is measured reliably in the small-scale classroom test.

• 생태와환경
• /
• 제56권4호
• /
• pp.339-347
• /
• 2023

본 연구는 TOC/TN-IRMS를 이용하여 총 유기탄소 및 총 질소 안정동위원소 분석법을 연구하였으며, 수환경 중저농도 시료에서도 분석이 가능하게 시스템을 구축하였다. 수생태계로 유입되는 다양한 유기탄소 기원을 파악하기 위하여 형광지표와 δ¹³C-DOC 안정동위원소비를 활용한다면 효율적인 수질 관리를 위한 해석기능을 제공할 것이며, 추후 유역 오염원의 대표값(end member)의 지속적인 조사를 통하여 자료구축이 이루어져야 할 것이다.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.63-68
• /
• 2003

Scanning electron microscopy (SEM) has been used as a surface measurement instrument and a tool for lithography in semiconductor process due to its high density localized beam. For those purposes, however, the maximum current of SEM Is less than 100pA, which is not enough fo material processing. In this paper SEM was modified to increase the amount of current reaching a specimen from gun part where current is generated, the possibility of applying SEM to material processing, especially microjoining, was investigated. The maximum current of SEM after modifications was measured up to 10$\mu$A, which is about 10$^{5}$ times greater than before modifications. Through experiments such as eutectic solder wetting on thin 304 stainless steel foil and microjoining of 10$\mu$m thick 304 stainless steel, the intensity of electron beam of SEM proved to be great enough fur material processing as heat source. And a tight jig system was found necessary to hold materials close enough fur successful microloining.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.373-378
• /
• 2008

In this paper, an Active Power Filter (APF) is implemented using a dSPACE DS1104 processor to compensate harmonics and reactive power produced by nonlinear load. The reference source current is computed based on the measurement of harmonics in the supply voltage and load current. A hysteresis based current controller has been implemented in a DSP processor for injecting the compensating current into the power system, so that APF allows suppression of the harmonics and reactive power component of load current, resulting in a supply current that is purely sinusoidal. Simulation and experimental results of the proposed APF to meet the IEEE-519 standards are presented.