• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.359-364
• /
• 2008

To satisfy the demand of higher cutting performance, mechanical properties with tungsten carbide (WC-Co) tool materials were investigated. Hardness and transverse rupture strength with WC grain size, Co content and density were measured. Compared to H, K, and S manufacture maker as tungsten carbide (WC-Co) tool materials were used for high-speed machining of end-milling operation. The three tungsten carbide (WC-Co) tool materials were evaluated by cutting of STD 11 cold-worked die steel (HRC25) under high-speed cutting condition. Also, tool life was obtained from measuring flank wear by CCD wear measuring system. Tool dynamometer was used to measure cutting force. The cutting force and tool wear are discussed along with tool material characteristics. Consequently, the end-mill of K, H manufacture maker showed higher wear-resistance due to its higher hardness, while the S maker endmill tool showed better performance for high metal removal.

• 동아시아식생활학회지
• /
• 제11권4호
• /
• pp.268-273
• /
• 2001

This study was performed to investigate the effects of HBM(Healthy Body Maker) on the weight loss and serum cholesterol level of rats. Twenty male Sprague-Dawley rats weighing 200$\pm$5g were grouped into 2. Rats were raised for 6 weeks with diet containing 0% and 5% of HBM. 1. There were no clinical signs for all the experimental period(6 weeks) in 0% and 5% groups. 2. At 3 and 6 weeks. body weight of 5% HBM group was significantly lower than that of control group. respectively(p<0.05, p<0.01). 3. At 4 weeks. the level of MCHC of 5% HBM group was significantly higher than that of control group(p<0.01) And at 6 weeks the level of RBC and Hct of 5% HBM group were significantly higher than those of control group(p<0.05) 4. At 6 weeks. the level of serum cholesterol of 5% HBM group was significantly lower than that of control group. 5. Absolute liver weight of 5% HBM group was significantly lower than that of control group(p<0.05). 6. Minor subaceous sickness of liver cell in the control group appeared but no symptom of liver cell in 5% HBM group. It is concluded that HBM was a safe and effective diet food which aided in inducing weight loss in rat without any observed harmful clinical side effects.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.380-383
• /
• 2003

In this paper, we propose a fuzzy group decision making method for multiple decision maker-multiple objective programming problems to obtain the agreeable solution. In the proposed method, considering the vague nature of human subjective judgement it is assumed that each of multiple decision makers has a fuzzy goal for each of his/her own objective functions. After eliciting the membership functions from the decision makers for their fuzzy goals, total M-Pareto optimal solution concept is defined in membership spaces in order to deal with multiple decision maker-multiple objective programming problems. For generating a candidate of the agreeable solution which is total M-Pareto optimal, the extended weighted minimax problem is formulated and solved for some weighting vector which is specified by the decision makers in their subjective manner, Given the total M-Pareto optimal solution, each of the derision makers must either be satisfied with the current values of the membership functions, or update his/her weighting vector, However, in general, it seems to be very difficult to find the agreeable solution with which all of the decision makers are satisfied perfectly because of the conflicts between their membership functions. In the proposed method, each of the decision makers is requested to estimate the degree of satisfaction for the candidate of the agreeable solution. Using the estimated values or satisfaction of each of the decision makers, the core concept is desnfied, which is a set of undominated candidates. The interactive algorithm is developed to obtain the agreeable solution which satisfies core conditions.

• 소음진동
• /
• 제10권3호
• /
• pp.465-473
• /
• 2000

In this crankshaft of marine diesel engines the exciting torques are produced by gas pressure and reciprocating masses. These torques are periodically changing and are extremely out of balance. To calculate the torsional vibrations of propulsion shafting caused by unbalanced torque the torque harmonics are utilized. Until now to calculate the torsional vibrations of propulsion shafting. the torque harmonics have been supplied by the engine maker. When the torque harmonics of an engine are not available the torque harmonics of a similar engine type had to be used. However such data is not suitable for the reliable calculations of torsional vibrations. In this paper the combustion characteristics of marine diesel engines including $\rho{-}\upsilon$ diagram are investigated and the torque harmonics based on these are theoretically calculated. reliability of the calculations is confirmed by comparing them with those of an engine maker. This study should prove useful for the calculations of torsional vibrations for diesel engine propulsion shafting. particularly for 4-stroke engines whose torque harmonics are difficult to obtain directly from the engine and not ordinarily supplied by the engine maker.

• 기술혁신연구
• /
• 제15권2호
• /
• pp.61-81
• /
• 2007

A typical small firm in consumer goods sectors of developing countries is an OEM supplier to big MNCs. Lacking design and marketing capability, a small firm relies on the MNCs for survival but their long term growth is not guaranteed as the MNCs are always looking for, and ready to relocate to, cheaper production sites. In this light, we can say that there is something like "OEM trap" from which most firms from LDCs find difficult to move out (Lee 2005). In this situation, one way for long term growth and catch-up is to make a transition to the OBM (own brand manufacturer). But, the transition is not easy or even risky. This paper analyzes the cases of three companies in Korea to find out common features in their successful transition to OBM. They are Aurora World (a flush toy maker), Hankook Chinaware (a chinaware maker), and Hanacobi (a plastic-made food container maker with the Lock-and-Lock brand). These firms can be commonly characterized by 1) arranging access to external knowledge base and steady increase of in-house R&D efforts and capabilities leading to acquisition of formal IPRs and their management, and 2) establishment of global production networks with factories in lower-income countries as well as their own independent global marketing network.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.12-16
• /
• 2009

In this study, the wave profiles and kinematics of highly nonlinear waves at various water depths were calculated using a 2D fully nonlinear Numerical Wave Tank (NWT). The NWT was developed based on the Boundary Element Method (BEM) with the potential theory and the mixed Eulerian-Lagrangian (MEL) time marching scheme by 4th-order Runge-Kutta time integration. The spatial variation of intermediate-depth waves along the direction of wave propagation was caused by the unintended generation of 2nd-order free waves, which were originally investigated both theoretically and experimentally by Goda (1998). These free waves were induced by the mismatch between the linear motion of wave maker and nonlinear displacement of water particles adjacent to the maker. When the 2nd-order wave maker motion was applied, the spatial modulation of the waves caused by the free waves was not observed. The respective magnitudes of the nonlinear wave components for various water depths were compared. It was found that the high-order wave components greatly increase as the water depth decreases. The wave kinematics at various locations were calculated and compared with the linear and the Stokes 2nd-order theories.

• 한국멀티미디어학회논문지
• /
• 제10권6호
• /
• pp.754-759
• /
• 2007

Methodology of ontology building based on Web resources will not only reduce significantly the ontology construction period, but also enhance the quality of the ontology. Remarkable progress has been achieved in this regard, but they encounter similar difficulties, such as the Web data extraction and knowledge acquisition. This paper researches on the characteristics of ontology construction data, including dynamics, largeness, variation and openness and other features, and the fundamental issue of ontology construction - formalized representation method. Then, the key technologies used in and the difficulties with ontology construction are summarized. A software Model-OntoMaker (Ontology Maker) is designed. The model is innovative in two regards: (1) the improvement of generality: the meta learning machine will dynamically pick appropriate ontology learning methodologies for data of different domains, thus optimizing the results; (2) the merged processing of (semi-) structural and non-structural data. In addition, as known to all wetland researchers, information sharing is vital to wetland exploitation and protection, while wetland ontology construction is the basic task for information sharing. OntoMaker constructs the wetland ontologies, and the model in this work can also be referred to other environmental domains.

• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.65-68
• /
• 2013

A novel bumping process using solder bump maker (SBM) is developed for fine-pitch flip chip bonding. It features maskless screen printing process. A selective solder bumping mechanism without the mask is based on the material design of SBM. Maskless screen printing process can implement easily a fine-pitch, low-cost, and lead-free solder-on-pad (SoP) technology. Its another advantage is ternary or quaternary lead-free SoP can be formed easily. The process includes two main steps: one is the thermally activated aggregation of solder powder on the metal pads on a substrate and the other is the reflow of the deposited powder on the pads. Only a small quantity of solder powder adjacent to the pads can join the first step, so a quite uniform SoP array on the substrate can be easily obtained regardless of the pad configurations. Through this process, an SoP array on an organic substrate with a pitch of 130 ${\mu}m$ is, successfully, formed.

• 복식
• /
• 제63권4호
• /
• pp.101-117
• /
• 2013

The purpose of this study is to consider the works of Nick Knight, the most influential fashion visual maker, to find out the characteristics of his works. For the research method, literature reviews were done by studying his book, viewing the articles on his official web site, reading journal review of his works and his interview articles. For the work analysis, fashion brands 'Christian Dior', 'Alexander McQueen', 'Martin Margiela', 'Hussein Chalayan' and 'Gareth Pugh' that have worked with Nick Knight were selected. The characteristics of his fashion works were derived from overall analysis of fashion visual works. The characteristics of Nick Knight's works are as follows. First is the 'innovation of image expression'. He used digital infra in advance and introduced digital images at the initial stage. He used fashion films as the means of communication and tried new image expressions in 3D. Second is 'breaking down the boundaries of creating process'. He worked with various field experts to make high quality works. He invited the public to participate in his creative process through the internet. Third is 'breaking down the categories of aesthetic expression'. He provided a wide variety of aesthetic standard and refused aesthetic stereotype. He broke the boundaries between fashion and art with a unique technique and high values.

• 한국의류학회지
• /
• 제25권2호
• /
• pp.315-326
• /
• 2001

This study is to suggest data for setting school uniform size with the size satisfaction degree through finding out the physical body change and uniform size problems following an increase in age during middle school girl days. For this purpose, by analyzing the physical body size data of 13~15 age of girls among $\ulcorner$human body size data of the youth for product design$\lrcorner$publicized under sponsorship of National Technology Quality Institute in 1999 the physical body size change by part following an increase in age during middle school girl days was found out and the most frequent physical body size by grade was suggested. Questionnaire about uniform production status and product size at the object of uniform makers were measured directly, a school uniform wearing status and size satisfaction degree by part were at the abject of middle school girls were examined by means of questionnaire and unsatisfactory factors in uniform size were found out. Based on collected data the most optimum product size in each part by item were suggested. The method of suggesting the most optimum size suitability by item was decided based on the result of survey into corresponding title and product size by maker and that of survey into the size satisfaction degree of middle school girls by maker, and the product size of maker showing the highest size satisfaction degree was selected as the most optimum product size.