Browse > Article
http://dx.doi.org/10.4150/KPMI.2008.15.5.359

Performance Evaluation on the Endmill of High Speed Machining for Selection of Tungsten Carbide (WC-Co) Material  

Kwon, Dong-Hee (School of Mechanical Engineering, Pusan National University)
Kim, Jeong-Suk (School of Mechanical Engineering, Pusan National University)
Kim, Min-Wook (National Core Research Center for Hybrid Materials Solution, Pusan National University)
Jeong, Young-Keun (National Core Research Center for Hybrid Materials Solution, Pusan National University)
Kang, Myung-Chang (National Core Research Center for Hybrid Materials Solution, Pusan National University)
Publication Information
Journal of Powder Materials / v.15, no.5, 2008 , pp. 359-364 More about this Journal
Abstract
To satisfy the demand of higher cutting performance, mechanical properties with tungsten carbide (WC-Co) tool materials were investigated. Hardness and transverse rupture strength with WC grain size, Co content and density were measured. Compared to H, K, and S manufacture maker as tungsten carbide (WC-Co) tool materials were used for high-speed machining of end-milling operation. The three tungsten carbide (WC-Co) tool materials were evaluated by cutting of STD 11 cold-worked die steel (HRC25) under high-speed cutting condition. Also, tool life was obtained from measuring flank wear by CCD wear measuring system. Tool dynamometer was used to measure cutting force. The cutting force and tool wear are discussed along with tool material characteristics. Consequently, the end-mill of K, H manufacture maker showed higher wear-resistance due to its higher hardness, while the S maker endmill tool showed better performance for high metal removal.
Keywords
Endmill tool; Tool wear; Tungsten carbide (WC-Co); High speed machining;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 D. H. Kwon, M. C. Kang, J. S. Kim, J. T. Ok and K. H. Kim: Surf. Coat. Technol., 200 (2005)1933   DOI   ScienceOn
2 W. M. Daoush, K. H. Lee, H. S. Park, J. J. Jang and S. H. Hong: J. Korean Powder Metall. Inst., 3 (2007) 208-214 (Korean)   과학기술학회마을   DOI   ScienceOn
3 S. Tomasz, G. Witold and J. Jacek: Surf, Coat, Technol., 194 (2005) 319   DOI   ScienceOn
4 M. Rahman and A. S. Kumar: J. Of MTM, 42 (2001) 539   DOI   ScienceOn
5 W. Maritzen: Powder Metall., 17 (1985) 68
6 J. Almer, M. Oden and G. Hakansson: Thin Solid Films, 385 (2001) 190-197   DOI   ScienceOn
7 S. Ulvi and H. Hasan: J. of Mat. Proce. Technol., 173 (2006) 260   DOI   ScienceOn
8 J. C. Kim, G. H. Ha and B. K. Kim: J. Korean Powder Metall. Inst., 2 (2004) 124-129 (Korean)   과학기술학회마을   DOI   ScienceOn
9 S. Hogmark, S. Jacobson and M. Larsson: Wear, 246 (2000) 20   DOI   ScienceOn
10 W. Y. Bao and I. N. Tansel: Int. J. Mach. Tools Manuf., 40 (2000) 2155   DOI   ScienceOn
11 T. Cselle and A. Barimani: Surf. Coat. Technol., 76-77 (1995) 712   DOI   ScienceOn
12 E. Lardner: Power Metall., 21 (1978) 65   DOI   ScienceOn
13 H. Juan, S.F. YU and B.Y. Lee: Int. J. of Mach. Tools Manuf., 43 (2003) 679   DOI   ScienceOn
14 D. R. Kumar: Indian Inst. of Technol., 45 (2002) 219
15 J. H. Kim, D. K. Moon, D. W. Lee, J. S. Kim, M. C. Kang and K. H. Kim: J. of Mat. Proce. Technol., 130-131 (2002) 126
16 H. Saito, A. Iwabuchi and T. Shimizu: Wear, 261 (2006) 132   DOI   ScienceOn
17 S. W. Huang, M. W. Samandi and M. Brandt: Wear, 252 (2002) 566   DOI   ScienceOn