• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.132-139
• /
• 2018

The photosynthetic rate is an indicator of the growth state and growth rate of crops and is an important factor in constructing efficient production systems. The objective of this study was to develop a canopy photosynthetic rate model of romaine lettuce using the three variables of $CO_2$ concentration, light intensity, and growth stage. The canopy photosynthetic rates of the lettuce were measured at five different $CO_2$ concentrations ($600-2,200{\mu}mol{\cdot}mol^{-1}$), five light intensities ($60-340{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$), and four growth stages (5-20 days after transplanting) in three closed acrylic chambers ($1.0{\times}0.8{\times}0.5m$). A simple multiplication model expressed by multiplying three single-variable models and the modified rectangular hyperbola model including photochemical efficiency, carboxylation conductance, and dark respiration, which vary with growth stage, were also considered. In validation, the $R^2$ value was 0.923 in the simple multiplication model, while it was 0.941 in the modified rectangular hyperbola model. The modified rectangular hyperbola model appeared to be more appropriate than the simple multiplication model in expressing canopy photosynthetic rates. The model developed in this study will contribute to the determination of an optimal $CO_2$ concentration and light intensity with the growth stage of lettuce in plant factories.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.290-290
• /
• 2020

연구지역인 충청남도 홍성군 갈산면 신곡마을은 상시 가뭄지역으로서 농번기 물부족을 겪고 있으며, 물 확보의 수단으로서 지하수 인공함양이 고려되고 있다. 본 연구에서는 수치모델을 이용하여 수직정 방식의 지하수 인공함양시 주입 효과를 예비 평가하였다. 모델 지역은 가로 세로 2,450 × 2,350 m로서 10 × 10 m 간격의 격자로 구성하였으며, 현장에서 실시된 지하수위 조사 및 9공의 시추조사, 1개공의 양수시험 결과로부터 수리전도도, 지층분포 등을 구성하였다. 정류모델결과, 실측 및 예측 지하수위의 표준오차(Standard error of the estimate)는 0.53 m, 표준화제곱근오차(Normalized RMS)는 6.79%, 상관계수는 0.99%로 나타났다. 수직정을 통한 주입 효과를 평가하기 위하여, 주입량을 5 ㎥/d, 10 ㎥/d, 15 ㎥/d, 20㎥/d, 주입기간을 1일, 3일, 7일, 우물의 개수를 1개, 3개, 5개일 때 등 다양한 조건하에서의 부정류 모델을 수행하였다. 이로부터 주입의 효과인 지하수위 상승량 및 상승 범위 등을 토대로 물 부족 기간의 인공함양 시나리오(주입정의 위치, 갯수, 심도, 기간 등)를 예비적으로 제시하였으며, 추후 정밀 모델 및 실제 현장 주입 시험 등을 토대로 인공함양 설계를 추진할 예정이다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.1-9
• /
• 2011

Memristor is a portmanteau of "memory resistor". The resistance of memristor is changed depends on the history of electric charge that passed through the device and it is able to memorize the last resistance after turning off the power supply. This paper presents this device that has a high chance to be the next generation of commercial non-volatile memory and its behavior modeling using SPICE simulation. The memristor MOS content addressable memory (M_CAM) is also designed and simulated using the proposed behavioral model. The proposed M_CAM unit cell area and power consumption show an improvement around 40% and 96%, respectively, compare to the conventional SRAM based CAMs. The M_CAM layout is also implemented using 0.13${\mu}m$ mixed-signal CMOS process under 1.2 V supply voltage.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1887-1892
• /
• 2005

In the future, a machine-tool will be more improved in the form of a knowledge evolution based device. In order to develop the knowledge evolution based machine-tool, this paper proposes the structure of standard M2M(Machine To Machine) and the scheme of agent communication in environment. The communication agent such as dialogue agent has a role of interfacing with another machine for cooperation. To design of the communication agent module in M2M environment, FIPA(Foundation of Intelligent Physical Agent) and ping agent based on JADE(Java Agent Development Framework) or FIPA-OS(Open Source) are analyzed in this study. Through this, it is expected that the agent communication can be more efficiently designed and the knowledge evolution based machine-tool can be hereafter more easily implemented.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.129-134
• /
• 2013

Previous research is focus on testcase generation automation using message sequence diagram based on metamodel. but that research is not enough for testcase genaeration automation using state diagram based metamodel. so in this paper is adopt Model Driven Architecture (MDA) mechanism for using metamodel and model transformation. and we suggest testcase automation mechanism using state diagram in UML. we will decrease cost of embedded software design and testcase genaration and increase quality of embedded software using metamodel mechanism.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.580-585
• /
• 2004

Respiration of 'Fuyu' persimmon (Diospyros kaki) fruits were measured in terms of oxygen consumption rate and carbon dioxide evolution by closed system experiments at 0, 5, and $20^{\circ}C$. Enzyme kinetics-based respiration model was used to describe respiration rate as function of $O_2\;and\;CO_2$ gas concentrations $(R=V_m[O_2]/K_m+(1+[CO_2]/K_i)[O_2])$, and Arrhenius equation was applied to analyze temperature effect. $V_m\;and\;K_m$ increased, while $K_i$ decreased, with increasing temperature. $K_m\;of\;O_2$ consumption was greater than that of $CO_2$ evolution at equal temperature. Inhibitory effect of reduced $O_2$ level on $O_2$ consumption was more prominent than that on $CO_2$ evolution. Activation energy of respiration decreased with reduced $O_2$ and elevated $CO_2$ concentrations. Activation energy of $CO_2$ evolution was greater than that of $O_2$ consumption. Permeable package experiments verified respiration model parameters by showing good agreement between predicted and experimental gas concentrations in package.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.118-128
• /
• 1983

Simulation model of natural air grain drying was discussed and modified to predict the changes of grain moisture content and dry matter loss of rough rice drying. The modified simulation model was then validated using actual test data. A series of simulated drying tests using official weather data for 15 years from Beaumont, Texas, was taken to make minimum airflow rate and maximum bed depth of rough rice drying by natural air, under different conditions of initial moisture content of rough rice, airflow rate and harvest date.

• Journal of Digital Convergence
• /
• v.12 no.9
• /
• pp.219-223
• /
• 2014

In line with the advanced wireless communication technology, M2M (Machine-to-Machine) communication has drawn attention in industry. M2M communication features are installed and operated in the fields where human accessibility is highly limited such as disaster, safety, construction, health and welfare, climate, environment, logistics, culture, defense, medical care, agriculture and stockbreeding. In M2M communication, machine replaces people for automatic communication and countermeasures as part of unmanned information management and machine operation. Wireless M2M inter-device communication is likely to be exposed to intruders' attacks, causing security issues, which warrants proper security measures including cross-authentication of whether devices are legitimate. Therefore, research on multiple security protocols has been conducted. The present study applied SessionKey, HashFunction and Nonce to address security issues in M2M communication and proposed a safe protocol with reinforced security properties. Notably, unlike most previous studies arguing for the security of certain protocols based on mathematical theorem proving, the present study used the formal verification with Casper/FDR to prove the safety of the proposed protocol. In short, the proposed protocol was found to be safe and secure.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.2
• /
• pp.23-28
• /
• 2005

This study was to suggest the propagation path loss and predictive model of propagation path analysis in order to apply the frequency in the millimeter-wave band to the real time inter-vehicle communication system. This study was to suppose the case of inter-vehicle communication on the one-way two-lanes road in the big cites with a lot of traffic jams in order to analyze the effect by the reflected wave of multipath. As a simulation of suggested model, it found out that the propagation path by the reflected wave was about 0.1[m]$\sim$5.1[m] longer than the one by the direct wave during the transmission of 100[m] wave direct path. Also, as a result of comparing the propagation path loss, the loss would be about -0.8[dB]$\sim$-4.2[dB] larger in case of wall reflection and -0.8[dB]$\sim$-1[dB] vehicle reflection. From the result above, this researcher found out that the path loss of reflected wave produced by the walls was about -3.2[dB] larger than the path loss produced by the adjacent vehicles.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.275-281
• /
• 2016

Subcooled boiling under low pressure was numerically investigated using computational fluid dynamics(CFD). The wall boiling model was used for simulating the subcooled boiling; this model requires sub-models consisting of bubble departure diameter, nucleation site density and bubble departure frequency. The CFD code CFX provides the default models based on experimental data. Because these models are mostly developed under high pressure conditions, it would not be predicted well in low pressure conditions. Thus in this study, CFD validation for subcooled boiling under low pressure was analyzed. The numerical results were compared with experimental data from published paper. Simulations were performed with mass flux ranging from 250 to $750kg/m^2s$, heat flux ranging from 0.37 to $0.77MW/m^2$ and constant outlet pressure of 0.11 MPa. Employing the empirical correlation developed under low pressures could increase the accuracy of numerical analysis.