• 제목/요약/키워드: Low-e 유리

검색결과 122건 처리시간 0.042초

창호 유리의 단열필름 시공에 따른 생애주기비용 비교 분석 (A Comparative Analysis of Life Cycle Cost on the Window Glass and the Insulation Film Coated Glass for Window)

  • 정민구;김광희
    • 한국건축시공학회지
    • /
    • 제14권6호
    • /
    • pp.583-590
    • /
    • 2014
  • 본 연구에서는 경제적인 창호공사 방안을 확인하기 위해 단열필름이 시공된 창호유리와 일반유리의 생애주기비용을 분석하여 비교하고자 하였다. 이를 위해 Window 6.3과 ECO2-OD 시뮬레이션 프로그램을 사용하여 유리 유형별 창호의 열성능 데이터를 측정하고 사례 건물에 적용하여 냉 난방 유지비용 및 LCC를 산출하여 경제성을 비교하였다. 연구결과 단열필름을 추가적으로 시공함으로써, 냉 난방 유지비용 측면에서는 하절기 태양열이 실내로 투과하는 것을 막아 냉방비용 절감 효과가 있지만, 이로 인해 동절기에는 난방비용이 증가하는 것으로 나타났다. 생애주기비용 측면에서 볼 때, 냉방비용 절감 효과가 난방비용 증가량과 필름 시공 및 수선으로 발생하는 추가비용을 상쇄하지 못하기 때문에 단열필름의 시공은 적절한 방법이 아니라고 할 수 있다.

유리 기판에 Catalytic CVD 저온공정으로 제조된 나노급 니켈실리사이드와 결정질 실리콘 (Nano-thick Nickel Silicide and Polycrystalline Silicon on Glass Substrate with Low Temperature Catalytic CVD)

  • 송오성;김건일;최용윤
    • 대한금속재료학회지
    • /
    • 제48권7호
    • /
    • pp.660-666
    • /
    • 2010
  • 30 nm thick Ni layers were deposited on a glass substrate by e-beam evaporation. Subsequently, 30 nm or 60 nm ${\alpha}-Si:H$ layers were grown at low temperatures ($<220^{\circ}C$) on the 30 nm Ni/Glass substrate by catalytic CVD (chemical vapor deposition). The sheet resistance, phase, microstructure, depth profile and surface roughness of the $\alpha-Si:H$ layers were examined using a four-point probe, HRXRD (high resolution Xray diffraction), Raman Spectroscopy, FE-SEM (field emission-scanning electron microscopy), TEM (transmission electron microscope) and AES depth profiler. The Ni layers reacted with Si to form NiSi layers with a low sheet resistance of $10{\Omega}/{\Box}$. The crystallinty of the $\alpha-Si:H$ layers on NiSi was up to 60% according to Raman spectroscopy. These results show that both nano-scale NiSi layers and crystalline Si layers can be formed simultaneously on a Ni deposited glass substrate using the proposed low temperature catalytic CVD process.

통계적 모멘트를 이용한 정확한 환경 지도 표현을 위한 저가 라이다 센서 기반 유리 특징점 추출 기법 (A Low-Cost Lidar Sensor based Glass Feature Extraction Method for an Accurate Map Representation using Statistical Moments)

  • 안예찬;이승환
    • 로봇학회논문지
    • /
    • 제16권2호
    • /
    • pp.103-111
    • /
    • 2021
  • This study addresses a low-cost lidar sensor-based glass feature extraction method for an accurate map representation using statistical moments, i.e. the mean and variance. Since the low-cost lidar sensor produces range-only data without intensity and multi-echo data, there are some difficulties in detecting glass-like objects. In this study, a principle that an incidence angle of a ray emitted from the lidar with respect to a glass surface is close to zero degrees is concerned for glass detection. Besides, all sensor data are preprocessed and clustered, which is represented using statistical moments as glass feature candidates. Glass features are selected among the candidates according to several conditions based on the principle and geometric relation in the global coordinate system. The accumulated glass features are classified according to the distance, which is lastly represented on the map. Several experiments were conducted in glass environments. The results showed that the proposed method accurately extracted and represented glass windows using proper parameters. The parameters were empirically designed and carefully analyzed. In future work, we will implement and perform the conventional SLAM algorithms combined with our glass feature extraction method in glass environments.

고 에너지 전자빔 조사된 IGZO 박막의 광 투과도에 대한 연구 (A Study on the Optical Transmittance of High-energy Electron-beam Irradiated IGZO Thin Films)

  • 윤의중
    • 전자공학회논문지
    • /
    • 제51권6호
    • /
    • pp.71-77
    • /
    • 2014
  • 본 연구에서는 radio frequency(rf) 마그네트론 스퍼터링 기술을 이용하여 Corning 유리 기판에 증착된 InGaZnO (IGZO) 박막의 광 투과도 특성에 고 에너지 전자빔 조사(high-energy electron beam irradiation (HEEBI))이 미치는 영향을 연구하였다. 저온에서 증착된 IGZO 박막은 공기 중 과 상온 조건에서 0.8 MeV의 전자빔 에너지와 $1{\times}10^{14}-1{\times}10^{16}electrons/cm^2$ dose를 사용하여 HEEBI 처리 되었다. IGZO 박막의 광 투과도는 utraviolet visible near-infrared spectrophotometer (UVVIS)로 측정되었다. HEEBI 처리 된 IGZO/유리 이중층의 총 광 투과도에서 HEEBI 처리된 IGZO 단일막 만의 광 투과도를 분리하는 방법을 상세히 연구하였다. 실험 결과로부터 $1{\times}10^{14}electrons/cm^2$의 적절한 dose로 처리된 HEEBI가 IGZO 박막의 투명도를 극대화시킴을 알 수 있었다. 또한 이렇게 적절한 dose로 처리된 HEEBI가 광학 밴드갭($E_g$)을 3.38 eV에서 3.31 eV로 감소시킴을 알 수 있었다. 이러한 $E_g$의 감소는 적절한 dose로 공기 중 상온에서 처리된 HEEBI가 진공 중 고온에서 처리된 열적 annealing 효과와 유사함을 제시하고 있다.

단섬유 강화 에폭시 복합재료의 열적/기계적 특성 (Thermal and Mechanical Properties of Short Fiber-Reinforced Epoxy Composites)

  • 황광춘;이충희;이종근
    • 폴리머
    • /
    • 제33권6호
    • /
    • pp.530-536
    • /
    • 2009
  • 고리지방족 에폭시와 산무수물 경화제계에 탄소단섬유(SCF)와 유리단섬유(SGF)를 첨가하여 복합재를 제조한 다음 이들의 열적/기계적 특성을 조사하였다. 열기계분석법으로 측정된 열팽창계수(CTE)의 감소 효과를 보면 낮은 단섬유 함량에서는 두 섬유가 거의 비슷하나, 함량이 증가하면 SCF가 SGF에 비해 훨씬 효과적이었다. SCF 강화 복합재에 대한 CTE 실험값을 이론식에 적용해 본 결과 함량이 낮을 때는 혼합법칙(mixture rule)에 잘 맞으며, 함량이 높아지면 Craft-Christensen 식에 근접하였다. 또한, 유리상($30^{\circ}C$과 고무상($180^{\circ}C$)에서의 저장탄성률은 단섬유를 첨가하였을 때 크게 증가하였다. 전자주사현미경(SEM)으로 파단면을 관찰하여본 결과 이와 같은 결과는 단섬유와 에폭시 매트릭스간의 계면접착력과 밀접한 관계가 있음을 알 수 있었다.

펨토초 레이저 기반 투명유리(BK7) 내부의 컬러 미세형상 가공 (Color modification inside a transparent glass(BK7) using a femtosecond laser)

  • 김훈영;윤지욱;최원석;박정규;최지연;김재구;황경현;조성학
    • 한국레이저가공학회지
    • /
    • 제15권3호
    • /
    • pp.16-19
    • /
    • 2012
  • We have successfully formed brown colored patterns inside of a transparent borosilicate glass generally known as BK7, laying the focus of near infrared Ti: sapphire femtosecond laser beam in the bulk BK7 glass. It is important to keep the laser power well below the damage threshold of BK7 in forming the color center. According to the low laser power, there was no laser induced mechanical damage such as cracks or threads in the color formed area. From the absorbance spectrum and its gaussian fitting, we found the band gap of BK7, 4.21eV, and three absorption edges.

  • PDF

현생 응력하에서 단층 마찰계수에 따른 임곡단층의 거동 가능성 해석 (Friction-dependent Slip Behavior of Imgok Fault under the Present-day Stress Field)

  • 나현우;장찬동;장천중
    • 지질공학
    • /
    • 제23권3호
    • /
    • pp.217-225
    • /
    • 2013
  • 강릉지역의 NNE-SSW 주향을 갖는 선형구조(임곡단층)를 대상으로, ASTER 영상과 항공사진을 이용한 구조 영상 분석과 야외지질조사를 통해 단층의 기하 및 운동학적 특성을 관찰하고 단층의 지질역학적 특성에 대한 분석을 시도하였다. 현생 응력장 하에서 임곡단층의 운동 가능성 여부를 파악하기 위해 이용된 주변 지진자료는 이 지역의 현생 최대응력방향이 약 N$70^{\circ}$E이며 주향이동과 역단층 운동에 유리한 응력상태임을 보여준다. 현생 응력장 하에서 임곡단층이 운동하기에는 최적의 방향에서 오차 범위 밖의 주향을 보여 전단 성향이 낮은 것으로 분석되었다. 그러나 단층의 역학적 특성을 나타내는 마찰계수(${\mu}$)가 상당히 낮을 경우(예를 들어 0.25 이하) 현생 응력장 하에서도 운동 가능성이 있는 것으로 파악된다.

화병 재료와 절화보존제 처리가 절화 장미와 거베라의 화색, 엽색 화경에 미치는 영향 (Effects of Vase Materials and Floral Preservative on Flower Color and Diameter in Cut Rose and Gerbera)

  • 임영희
    • 농업생명과학연구
    • /
    • 제45권1호
    • /
    • pp.59-66
    • /
    • 2011
  • 본 연구는 화병의 재질과 절화보존제 처리 여부가 절화의 화색, 엽색, 그리고 화경에 미치는 영향을 구명하기 위해 조사하였다. 절화 장미 (Rosa hybrida) 'Aqua'와 'Corvernet' 및 거베라 (Gebera jamesonii) 'Honeymoon'과 'Golden Time'을 수돗물 또는 절화보존제 용액이 들어있는 유리, 자기 및 옹기 화병에 꽂고 화색, 엽색, 최대화경의 변화를 측정하였다. 처리 8일 후 화색에 있어서 장미 'Aqua'의 ${\Delta}E$값은 옹기와 자기화병의 보존제 처리에서 작게 나타났다. 장미 'Covernet'은 옹기화병의 보존제 처리에서 ${\Delta}E$값이 가장 작았고, L값도 처리 직전의 꽃잎 (대조구)과 가장 근접하였다. 거베라 'Honeymoon'의 경우 절화보존제 처리와 옹기화병에 의해 ${\Delta}E$값이 가장 작게 나타났고, a와 b값도 58.81, 34.29로 대조구와 가장 유사하였기 때문에 옹기화병에 꽂은 절화의 화색이 처리 직전의 화색과 유사하였다. 거베라 'Golden Time'의 ${\Delta}E$값은 옹기화병이 자기나 유리화병보다 크게 작았는데, a값은 옹기화병의 보존제 처리에서 -7.81로 가장 근접하였고, b값 역시 옹기화병에서 높게 나타났다. 장미의 엽색에 있어서는 옹기화병의 보존제 처리에서 L, a, b값이 처리 직전의 잎과 가까웠고 ${\Delta}E$값은 옹기화병에서 3.25로 나타나 자기나 유리에 비해 작았다. 화경은 장미 'Covernet'과 거베라 'Golden Time' 모두 옹기의 보존제 처리에서 크게 나타났다. 이상의 결과로 보존용액에 절화보존제를 첨가함으로써 미생물 번식을 감소시켜 절화수명이 연장되어 장미와 거베라의 품질 및 신선도를 증가시킬 수 있고, 다공질의 옹기 화병을 사용하여 통기성을 증가시키면 화색과 엽색을 좀 더 좋게 하고, 화경도 증가시킬 수 있을 것으로 판단된다.

후면 유리종류에 따른 반투과 BIPV모듈의 전기적 특성 (Electrical Characteristics of Semi-transparent BIPV Module with Backside Glass)

  • 김하련;김경수;강기환;유권종;김준태
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1300-1301
    • /
    • 2011
  • The purpose of this study is to analyze the electrical performance characteristics of semi-transparent BIPV modules. This study dealt with four different types of semi-transparent PV modules depending on the backside glass material, such as clear glass, bronze glass, reflecting glass and low-e glass. The monitoring data shows that the PV module temperature and solar radiation were closely related to the electrical performance of the modules.

  • PDF

금속 유도 측면 결정화에 의해 유리기판 위에 제작된 저온(45$0^{\circ}C$) 다결정 박막 트랜지스터에 관한 연구 (A Study on the Low Temperature(45$0^{\circ}C$) Poly-Si TFT Fabricated on the Glass Substrate by Metal-Induced Lateral Crystallization (MILC))

  • 김태경;인태형;이병일;주승기
    • 전자공학회논문지D
    • /
    • 제35D권5호
    • /
    • pp.48-53
    • /
    • 1998
  • Poly-Si TFT's could be fabricated on glass substrates by metal induced lateral crystallization (MILC) method at 450.deg. C. Channel area of the poly-Si TFT's was laterally crystallized from source and drain areas, where a thn nickel film was deposited. Dopants activation for the formation of source and drain region could be achieved by thermal annealing at 450.deg. C after the ion mass doping of phosphorus. The field effect mobility of thus formed N-channel poly-Si TFT's was 76cm$^{2}$/Vs, and the on/off current ratio was higher than 7E6.

  • PDF