• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1558-1563
• /
• 2007

In this paper, phase-locked loop (PLL) of a combinational architecture consisting of an adaptive bandwidth and fractional-N is presented to improve performances and reduce the order of ${\Delta}{\Sigma}$ modulator while maintaining equivalent or better performance with fast locking. The architecture of adaptive bandwidth PLL was simulated by HSPICE using 0.35m CMOS parameters. The behavioral simulation of the proposed adaptive bandwidth fractional-N PLL with a ${\Delta}{\Sigma}$ modulator was carried out by using MatLab to determine if the architecture could achieve the objectives. The HSPICE simulation showed that this type of PLL was able to fast locking, and reduce fractional spurs about 20dB.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.3
• /
• pp.149-152
• /
• 2012

In this paper, a wideband monopole antenna with ring loop by modified ground plane is presented. The proposed antenna consist of monopole antenna, ring loop by ground plane. This antenna is fed CPW-fed and wide slot antenna of a novel structure for broadband characteristics is proposed. To enhance the impedance bandwidth of the wide slot antenna, we proposed the wide slot structure with CPW-fed which is combined with four ${\lambda}/2$ rectangular radiation modified monopole and inductively coupled. The measured impedance bandwidth is about 2.5 GHz(3.65~6.15 GHz) then less -10 dB.

• Journal of electromagnetic engineering and science
• /
• v.17 no.4
• /
• pp.197-201
• /
• 2017

In this paper, we present a novel design for a dual-band bandpass filter (BPF) based on the conventional second-order, open-loop BPF. By adding series resonant circuits to the open ends of the resonator, we can create two resonant modes from the even and odd modes. One pair of the even and odd modes constitutes the upper passband, while the other pair constitutes the lower passband. By adding another series resonant circuit to the open-loop resonator, we can control the bandwidth of either the upper passband or the lower passband. We can replace the series resonant circuits with simple microstrip line resonators. A dual-band BPF working at both Wi-Fi bands (2.4 GHz and 5.8 GHz bands) is designed based on the proposed method and is tested. The measured and simulated results show excellent agreement.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1365-1368
• /
• 2014

A CPW-fed to CPS dipole antenna of triangular loop director by microstrip tapered balun is proposed for dual and wide band operations, in this paper. The proposed antenna is consisted of a CPW-fed to CPS transform, microstrip tapered balun element, CPS dipole driver and triangular loop director. A dual and wide bandwidth of the proposed dipole antenna is realized by introducing the triangular loop director and taper matching element. The operated frequency bandwidth is 1GHz (2.14~3.14 GHz) and 1.9 GHz (4.6~6.5 GHz) to return loss criterion of less than 10 dB. The measured return loss of the proposed antenna showed good results of the dual and wide band operating frequency and the radiation pattern. The proposed antenna is able to support WLAN wireless communications applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2378-2384
• /
• 2009

A novel phase-locked loop(PLL) architecture of sub-micron locking time has been proposed. Input frequency is multiplied by using a delay-locked loop(DLL). The input frequency of a PLL is multiplied while the PLL is out of lock. The multiplied input frequency makes the PLL having a wider loop bandwidth. It has been simulated with a $0.18{\mu}m$ 1.8V CMOS process. The simulated locking time is $0.9{\mu}s$ at 162.5MHz and 2.6GHz, input and output frequency, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.93-98
• /
• 2003

In this paper, we designed a printed square loop antenna for operating of PCS and IMT2000 band. The proposed antenna has omni-directional radiation patterns with broad bandwidth, similar to the conventional antenna, to easy feed on composing single planar. We obtain an ideal impedance matching and increase bandwidth. An antenna bandwidth is about 150MHz(1.74∼l.89〔GHz〕) at 1$^{st}$ resonance frequency and 290MHz(1.95∼2.24GHz) at 2$^{nd}$ resonance frequency on VSWR(equation omitted)1.5, and then we can obtain not only 1.73∼l.87 〔GHz〕 PCS band but also 1.92∼2.17 (GHz) IMT2000 band. band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.649-656
• /
• 2002

This paper addresses the phase noise analysis of high-speed DH-PLL(Digital Hybrid Phase-Locked Loops) frequency synthesizer. Because of the additional quantization noise of D/A converter in DH-PLL, the phase noise of DH-PLL is increased than the conventional PLL. Three kinds of noise sources such as reference input, D/A converter, and VCO(Voltage Controlled Oscillator) are considered to analyze the phase noise. It largely depends on the closed loop bandwidth and frequency synthesis division ratio(N) so that we can decide the optimal closed loop bandwidth to minimize the phase noise of DH-PLL. It is shown that the simulation results closely match with the results of analytical approach.

• Journal of electromagnetic engineering and science
• /
• v.14 no.2
• /
• pp.74-78
• /
• 2014

This paper presents a modified TEM horn that improves radiation characteristics at a low frequency region. The proposed antenna consists of an asymmetric TEM (ATEM) horn and a loop structure with an elliptical shape. The bandwidth and gain at low frequency region can be enhanced by using the ATEM horn configuration and adding a loop structure with an elliptical shape to the ATEM horn. The bandwidth of the proposed antenna is from 2.14 to over 20 GHz, whereas that of the conventional TEM horn is from 2.7 to over 20 GHz, where the dimensions of both antennas are the same except for the thickness of the loop structure. The physical and electrical dimensions of the proposed antenna are $60mm{\times}62.5mm{\times}64mm$ ($width{\times}height{\times}length$) and $0.428{\lambda}_L{\times}0.445{\lambda}_L{\times}0.456{\lambda}_L$, where ${\lambda}_L$ corresponds to the lowest frequency of the bandwidth. The realized gain of the proposed antenna is improved by 0.802 dB on average at the low frequency region (2 to 8 GHz), where the maximum gain increase is 2.932 dB when compared to a conventional TEM horn.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.181-185
• /
• 1998

Gain characteristic of concatenated erbium-doped fiber amplifiers(EDFA) are studied with a recirculating EDFA loop. For a non-flat gain EDFA, the 3 dB gain bandwidth was reduced to 6 nm after the 20th EDFA. However, for an optimized gain flattened EDFA, in a simple configuration, the 5 dB gain bandwidth was found to be 9nm, even after the 100th EDFA, corresponding to 8000km transmission. This results suggest that the simple optimized flat gain amplifier could be a good candidate for ultra-long distance wavelength division multiplexed transmissions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1421-1432
• /
• 1994

The optimum design and performance of noncoherent TDL considering the effect of distortions due to the IF bandpasss filters are described. NRZ data and ideal filter is presumed in the simulation. The optimum filter bandwidth is calculated in the sense of minimizing the loop's squaring loss, which is equivalent to minimizing the loop's tracking jitter for a given data rate and data signal-to-noise ratio. As a result, the optimum filter bandwidth depends on the signal-to-noise ratio, and is obtained in the range of about 1-2 times of the data rate.