• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.995-1002
• /
• 2018

Hairy root culture of ginseng is industrially prospected because the cultivation period of ginseng is relatively long. In this study, the effect of medium concentration and sucrose concentration on hairy root culture of ginseng was evaluated. The optimization of ginseng hairy roots transformed by Agrobacterium rhizogene were performed liquid medium. The MS(Murashinge & Skoog basal medium) concentration was selected with 1/2 strength MS and the optimal sucrose concentration was determined at 2-3%(w/v). At the optimum culture condition, The yield (the ratio of weight of grown hairy root cultures to weight of fresh ginseng hairy roots) and production rate of ginseng root were 19.42 times and 5.73 g/l-day. The major ginsenosides were Rb group, Re and Rg1. The produced total ginsenoside content in the solid medium was 9.87 (mg/g) and increased 1.34 times in the liquid medium (13.23 mg/g). In solid culture, the contents of ginsenosides Rb, Re and Rg1 were 2.14, 3.65 and 1.87 mg/g, respectively. In liquid culture, the contents of ginsenosides Rb, Re and Rg1 were 3.54, 4.12 and 2.63 mg/g, respectively.

• 한국버섯학회지
• /
• 제19권1호
• /
• pp.1-8
• /
• 2021

The choice of the culture medium is an important factor for the mass production of mycelia in submerged cultures. The influence of liquid medium on the mycelial dry weight of Paecilomyces tenuipes was investigated in this study. The regression equation is expressed as Y=-1292.94187+17.78612X1+18.92425X2+2.11464X3-0.019375X1X2-0.006276X1X3+0.008177X2X3-0.070169X12-0.292175X22-0.008818X32, where Y represents the value of the mycelial dry weight (g/L), X1 is the particle size of wood sawdust in liquid medium (mesh), X2 is the concentration of the wood sawdust in liquid medium, and X3 is incubation time (h). The medium was optimized using a response surface methodology, and the optimal medium contained 30 g of wood sawdust (140 mesh), 20 g of glucose, and 10 g/L of peptone. Under these conditions, the mycelial dry weight reached 38.1 g/L (actual value). The culture medium containing wood sawdust is simple and easy to use, highly efficient, and eco-friendly, and its effectiveness in large preparations of P. tenuipes mycelia with low material costs has been demonstrated.

• Journal of Plant Biotechnology
• /
• 제30권2호
• /
• pp.185-188
• /
• 2003

In order to enhance shoot elongation and rooting of Anthurium andreanum 'Atlanta' in vitro, 15mL of liquid media containing various concentrations of activated charcoal, sucrose and MS salts were added in same vessels after small shoots were induced from the calli on mudium supplemented with 10.0mg/L BA and 0.1mg/L 2.4-D. The post-supplying of 15mL liquid medium containing MS macro and micro elements, 30g/L sucrose and 5.0∼10.0g/L activated charcoal was significantly stimulated the shoot elongation and rooting of regenerated shoots from calli. The medium addition was also resulted in the enhanced soil survival, elongation and rooting of plantlets in cultural soil mixed with perlite and vermiculite(1 : 1)

• 미생물학회지
• /
• 제21권4호
• /
• pp.213-220
• /
• 1983

Conditions for isolation of protoplasts from conidiospores of Trichoderma koningii ATCC 26113 were tested. Maximum production of conidial protoplasts was obtained by preincubation of conidiospores on liquid minimal medium for 8 1/2 hrs. and by reaction with cell wall lytic enzyme for 3 hrs. Among effective cell wall lytic enzymes (Driselase, p-Glucuronidase, Novozyme and Zymolyase), Driselase was the most effective one on the production of conidial protoplasts. The production of conidial protoplasts was also enhanced by addition of 2-Deoxy-D-Glucose $(25{\mu}g/ml)$ into liquid minimal medium. Over 70% of the initial swollen conidia, preincubated in liquid minimal medium supplemented with 2-Deoxy-D-Glucose $(25{\mu}g/ml)$, were converted to protoplasts by incubation with 2% (w/v) commercial lytic enzyme Driselase at $28^{\circ}C$ for 3 hrs. The reversion frequency of the conidial protoplasts was about 30 times (25-50%) higher than that of mycelial protoplasts (0.6-1.3%).

• 식물조직배양학회지
• /
• 제27권2호
• /
• pp.149-154
• /
• 2000

땅두릅 미성숙 화기절편을 이용하여 1 mg/L 2,4-D의 고체배지에서 배발생 캘러스를 유도하였고 동일조건의 액체배지에서 증식시켰다. 배발생 세포를 270$\mu\textrm{m}$의 걸름체로 거른 다음 배발생 세포는 싸이토카이닌이 포함된 MS 액체배지에서 2주 동안 배양하였고 그후 생장조절물질이 없는 MS 액체배지에서 5주간 배양하여 1차 체세포배가 유도되었다. 이들중 어뢰형과 자엽형 시기의 배를 생장조절물질이 없는 MS고체 배지에 치상하였을 때 캘러스의 형성 없이 2차배가 직접 유도되었다. 2차배를 유도할 때 2mg/L kinetin에서 얻어진 1차 배에서 가장 높은 빈도의 2차배가 발생되었다. 식물체 재생은 1 mg/L kinetin 혹은 1 mg/L zeatin을 처리하여 얻어진 1차 자엽형배로부터 유도된 2차 자엽형배를 생장조절물질이 없는 MS 고체배지에 치상하였을 때 높게 나타났다 (각각 25.4%, 28.6%). 2차배로부터의 3차배 발생과 식물체 재생과의 상관 관계를 볼 때 식물체의 재생에 있어서 3차배의 배발생은 저해적인 영향을 주었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.56-60
• /
• 2021

The microwave Radar used for special purposes in the past is being applied in various areas due to the technological advancement and cost reduction, and is particularly applied to autonomous driving in the automobile field. The FMCW (Frequency Modulated Continuous Wave) Radar can acquire level information of liquid in vessel based on the beat frequency obtained by continuously transmitting and receiving signals by modulating the frequency over time. However, for cryogenic fluids with small impedance differences between liquid medium and gas medium, such as liquid nitrogen and liquid hydrogen, it is difficult to apply a typical Radar-based level meter. In this study, we develop an 80 GHz FMCW Radar for level measurement of cryogenic fluids with small impedance differences between media and analyze its characteristics. Here, because of the low intrinsic impedance difference, most of the transmitted signal passes through the liquid nitrogen interface and is reflected at the bottom of the vessel. To solve this problem, a radar measurement algorithm was designed to detect multiple targets and separate the distance signal to the bottom of the vessel in order to estimate the precise position on the liquid nitrogen interface. Thereafter, performance verification experiments were performed according to the liquid nitrogen level using the developed radar level meter.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.253-257
• /
• 2003

본 연구에서는 담자균류 중에 항암효과가 입증된 Coriolus versicolor의 균사체 생육과 다당체 생성에 유리한 배지를 선정하기 위하여 flask culture를 통하여 검토하였다. 임의의 배양조건 $27^{\circ}C$, 200rpm을 선택해 여러 탄소원과 질소원을 검토하여 각각 glucose와 yeast extract를 선택하였다.

• 한국자원식물학회지
• /
• 제21권1호
• /
• pp.60-65
• /
• 2008

배발생 캘러스 유도 실험을 통해 음나무의 대량 증식의 가능성을 제시하였다. 절편체의 부위 및 호르몬 농도에 따라 약간의 차이는 보였으나 대부분의 조건에서 배발생 캘러스가 유기되었다. 특히 엽병 절편체에 비하여 잎 절편체에서 배발생 캘러스 유기가 더 활발히 이루어졌으며, 2.0mg/l의 2,4-D와 0.1mg/l의 BA를 혼합 처리한 조건에서 가장 많이 유기됨을 확인할 수 있었다. 배발생 캘러스의 대량 증식을 위하여 현탁배양을 실시한 결과 1.0mg/l의 2,4-D를 첨가한 배양액이 증식에 가장 좋은 것으로 나타났으며, 무기염류를 1/2로 반감한 B5 배지와 White 배지가 적당한 것으로 나타났다. 또한 탄소원은 3%의 농도를 사용하였을 때 캘러스 증식 뿐만 아니라 체세포 배의 발아에도 적당한 것으로 나타났다. 따라서 본 실험 결과는 생물반응기를 이용한 음나무의 대량 생산을 가능하게 하는 기초 자료로 이용될 수 있을 것으로 생각된다.

• 한국응용과학기술학회지
• /
• 제32권1호
• /
• pp.93-99
• /
• 2015

본 연구는 유채 꽃가루 분말의 영양성분 분석과 파쇄한 꽃가루 분말을 이용하여 효모 배양용 액체배지와 고체배지를 제조하여 효모 배양효율을 분석하였다. 유채 꽃가루 분말(100 g)은 탄수화물 58.9 g, 단백질 20.8 g, 지방 4.1 g, 회분 2.5 g 및 수분 13.7 g으로 구성되었다. 당질 중에서는 Fructose(13.7 g), Glucose(11.1 g)와 Sucrose(6.6 g), 미네랄 중에서는 K(606.7 mg)와 P(603.3 mg) 함향이 높았다. 유리 아미노산은 Glutamic acid(2,482.4 mg), Aspartic acid(2,136.5 mg), Lysine(1,648.3 mg), 및 Leucine(1,631.1 mg) 순으로 많았다. 유채 꽃가루 분말을 단독 또는 NaCl을 첨가하여 액체배지 및 고체배지 제조하고 효모를 배양한 결과, 꽃가루 분말이 15 g/L 이상 함유된 액체배지는 효모 배양 후 건물중이 YPD 배지(대조구)에 비해 많았고, 꽃가루 분말의 농도 의존적으로 효모 건물중이 증가하였다. 또한 액체배지에 NaCl을 1~20 g/L 추가 시 배양된 효모의 건물중이 한층 더 증가하였다. 유채 꽃가루로 제조한 고체배지를 이용하여 효모를 배양(48시간)한 결과, 콜로니(colonies) YPD 배지와 유사하게 잘 자랐다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1997년도 추계 학술대회논문집
• /
• pp.120-125
• /
• 1997

In the present work the influence of various physical parameters on the two-phase flow behavior in a self-heated porous medium has been studied using a numerical model, that is, the effects of heat generation rate, of porosity, of particle size, and of system pressure on the dryout process. To analyze the effect of these parameters, the variation of both liquid volumetric fraction (i.e., liquid saturation) and liquid axial velocity is evaluated at the steady state or at the onset of a first boiled-out region. The analysis of computational results indicate that a qualitative tendency exists between the parameters such as heat generation rate, porosity, effective particle diameter and the temporal development of the liquid volumetric fraction field up to dryout. In addition to these parameters, a variation of fluid properties such as phase density, phase viscosity due to a change of system pressure can be used for gaining insight into the nature of two-phase flow behavior up to dryout.